Infineon/CYPRESS CY7C1353F-100ACT
| Manufacturer | |
| MPN | CY7C1353F-100ACT |
| LCSC Part # | C2955501 |
| Packaging | LQFP-100(14x20) |
| Customer # | |
| Key Attributes | 4Mbit Parallel Port (Parallel) LQFP-100(14x20) Memory |
| Datasheet | Infineon/CYPRESS CY7C1353F-100ACT |
| Alternative Parts | 5 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Memory/Memory | |
| Manufacturer | Infineon/CYPRESS | |
| Packaging | LQFP-100(14x20) | |
| Operating Temperature | 0℃~+70℃ | |
| Features | Auto power-down function | |
| Memory Size | 4Mbit | |
| Voltage - Supply | 205mA;3.135V~3.6V | |
| Access Time | 8ns | |
| Standby Supply Current | 40mA | |
| Interface | Parallel Port (Parallel) |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Memory/Memory | |
| Manufacturer | Infineon/CYPRESS | |
| Packaging | LQFP-100(14x20) | |
| Operating Temperature | 0℃~+70℃ | |
| Features | Auto power-down function |
| Type | Description | |
|---|---|---|
| Memory Size | 4Mbit | |
| Voltage - Supply | 205mA;3.135V~3.6V | |
| Access Time | 8ns | |
| Standby Supply Current | 40mA | |
| Interface | Parallel Port (Parallel) |
Introduction
The CY7C1353F is a 3.3V, 256K x 18 synchronous flow-through burst SRAM designed to support unlimited consecutive read and write operations without wait states. The device features advanced No Bus Latency (NoBL™) logic that transfers data every clock cycle, enabling continuous read/write operations. This characteristic significantly improves data throughput through the SRAM, making it especially suitable for systems requiring frequent write-to-read transitions. All synchronous inputs pass through input registers controlled by the rising edge of the clock. The clock input is qualified by a Clock Enable (CEN) signal; when CEN is deasserted, operation is suspended and the previous clock cycle is extended. The maximum access latency from the rising clock edge is 6.5 ns (133-MHz device). Write operations are controlled by two Byte Write Selects (BW[A:B]#) and one Write Enable (WE#) input. All write operations are performed through an on-chip synchronous self-timed write circuit. Three synchronous chip enables (CE1#, CE2, CE3#) and one asynchronous Output Enable (OE#) facilitate memory bank selection and output three-state control. To prevent bus contention, the output drivers synchronously enter three-state during the data portion of a write sequence.
Features
- Zero wait-state bus operation up to 133 MHz, transferring data every clock cycle
- Pin-compatible with ZBT™ devices, functionally equivalent
- Internal self-timed output buffer control, no OE required
- Registered inputs for flow-through operation
- Byte-write capability with 256K x 18 universal I/O architecture
- 2.5V / 3.3V I/O supply
- Fast clock-to-output time: 6.5 ns (133-MHz devices); 7.5 ns (117-MHz devices); 8.0 ns (100-MHz devices); 11.0 ns (66-MHz devices)
- Clock Enable (CEN) pin for operation pause
- Synchronous self-timed write operation
- Asynchronous output enable
- JEDEC standard 100 TQFP package
- Burst capability: linear or interleaved burst order
- Low standby power consumption
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Memory/Memory | |
| Manufacturer | Infineon/CYPRESS | |
| Packaging | LQFP-100(14x20) | |
| Operating Temperature | 0℃~+70℃ | |
| Features | Auto power-down function | |
| Memory Size | 4Mbit | |
| Voltage - Supply | 205mA;3.135V~3.6V | |
| Access Time | 8ns | |
| Standby Supply Current | 40mA | |
| Interface | Parallel Port (Parallel) |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Memory/Memory | |
| Manufacturer | Infineon/CYPRESS | |
| Packaging | LQFP-100(14x20) | |
| Operating Temperature | 0℃~+70℃ | |
| Features | Auto power-down function |
| Type | Description | |
|---|---|---|
| Memory Size | 4Mbit | |
| Voltage - Supply | 205mA;3.135V~3.6V | |
| Access Time | 8ns | |
| Standby Supply Current | 40mA | |
| Interface | Parallel Port (Parallel) |
Introduction
The CY7C1353F is a 3.3V, 256K x 18 synchronous flow-through burst SRAM designed to support unlimited consecutive read and write operations without wait states. The device features advanced No Bus Latency (NoBL™) logic that transfers data every clock cycle, enabling continuous read/write operations. This characteristic significantly improves data throughput through the SRAM, making it especially suitable for systems requiring frequent write-to-read transitions. All synchronous inputs pass through input registers controlled by the rising edge of the clock. The clock input is qualified by a Clock Enable (CEN) signal; when CEN is deasserted, operation is suspended and the previous clock cycle is extended. The maximum access latency from the rising clock edge is 6.5 ns (133-MHz device). Write operations are controlled by two Byte Write Selects (BW[A:B]#) and one Write Enable (WE#) input. All write operations are performed through an on-chip synchronous self-timed write circuit. Three synchronous chip enables (CE1#, CE2, CE3#) and one asynchronous Output Enable (OE#) facilitate memory bank selection and output three-state control. To prevent bus contention, the output drivers synchronously enter three-state during the data portion of a write sequence.
Features
- Zero wait-state bus operation up to 133 MHz, transferring data every clock cycle
- Pin-compatible with ZBT™ devices, functionally equivalent
- Internal self-timed output buffer control, no OE required
- Registered inputs for flow-through operation
- Byte-write capability with 256K x 18 universal I/O architecture
- 2.5V / 3.3V I/O supply
- Fast clock-to-output time: 6.5 ns (133-MHz devices); 7.5 ns (117-MHz devices); 8.0 ns (100-MHz devices); 11.0 ns (66-MHz devices)
- Clock Enable (CEN) pin for operation pause
- Synchronous self-timed write operation
- Asynchronous output enable
- JEDEC standard 100 TQFP package
- Burst capability: linear or interleaved burst order
- Low standby power consumption
Compliance & Export Codes
| Type | Details |
|---|---|
| ECCN | 3A991B2A |
| CNHTS | 8542329000 |
| USHTS | 8542320071 |
| TARIC | 8542329000 |
| CAHTS | 8542330000 |
| BRHTS | 85423299 |
| INHTS | 85423200 |
| MXHTS | 8542.32.99 |
| Type | Details |
|---|---|
| ECCN | 3A991B2A |
| CNHTS | 8542329000 |
| USHTS | 8542320071 |
| TARIC | 8542329000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423299 |
| INHTS | 85423200 |
| MXHTS | 8542.32.99 |

