Infineon/CYPRESS CY7C1474V25-200BGC

The CY7C1470V25/CY7C1472V25/CY7C1474V25 are 2.5 V, 2Mx36/4Mx18/1Mx72 synchronous pipelined burst SRAMs with No Bus Latency™ (NoBL) logic, respectively. They are designed to support unlimited true back-to-back read/write operations with no wait states. The CY7C1470V25/CY7C1472V25/CY7C1474V25 are equipped with the advanced (NoBL) logic required to enable consecutive read/write operations with data being transferred on every clock cycle. This feature dramatically improves the throughput of data in systems that require frequent write/read transitions. The CY7C1470V25/CY7C1472V25/CY7C1474V25 are pin-compatible and functionally equivalent to ZBT devices. All synchronous inputs pass through input registers controlled by the rising edge of the clock. All data outputs pass through output registers controlled by the rising edge of the clock. The clock input is qualified by the clock enable (CEN) signal, which when deasserted suspends operation and extends the previous clock cycle. Write operations are controlled by the Byte Write Selects and a write enable (WE) input. All writes are conducted with on-chip synchronous self-timed write circuitry. Three synchronous chip enables and an asynchronous output enable (OE) provide for easy bank selection and output tri-state control. In order to avoid bus contention, the output drivers are synchronously tri-stated during the data portion of a write sequence.

• Pin-compatible and functionally equivalent to ZBT™
• Supports 200-MHz bus operations with zero wait states
• Available speed grades are 200 and 167 MHz
• Internally self-timed output buffer control to eliminate the need to use asynchronous OE
• Fully registered (inputs and outputs) for pipelined operation
• Byte write capability
• Single 2.5 V power supply
• 2.5 V I/O supply (VDDQ)
• Fast clock-to-output times 3.0 ns (for 200-MHz device)
• Clock enable (CEN) pin to suspend operation
• Synchronous self-timed writes
• CY7C1470V25 available in JEDEC-standard Pb-free 100-pin TQFP, Pb-free and non Pb-free 165-ball FBGA package. CY7C1472V25 available in JEDEC-standard Pb-free 100-pin TQFP. CY7C1474V25 available in Pb-free and non Pb-free 209-ball FBGA package
• IEEE 1149.1 JTAG boundary scan compatible
• Burst capability – linear or interleaved burst order
• “ZZ” sleep mode option and stop clock option