TI LM4671ITLX/NOPB
| Manufacturer | |
| MPN | LM4671ITLX/NOPB |
| LCSC Part # | C2864949 |
| Packaging | DSBGA-9 |
| Customer # | |
| Key Attributes | Filterless High Efficiency 2.5W Switching Audio Amplifier |
| Datasheet | TI LM4671ITLX/NOPB |
| RoHS Compliance | 2 documents available |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Audio Amplifiers | |
| Manufacturer | TI | |
| Packaging | DSBGA-9 | |
| Voltage - Supply | 2.4V~5.5V | |
| Quiescent Current | 2.8mA | |
| Features | Filterless architecture;Enable/shutdown function;Automatic mute/no-noise switch | |
| Total Harmonic Distortion + Noise (THD+N) | 0.04% | |
| Operating Temperature | -40℃~+85℃ | |
| Number of Inputs | - | |
| Signal-to-Noise Ratio | 93dB | |
| Speaker Channels | 1-Channel | |
| Efficiency | 80%;86%;88% | |
| Output Power | 2.1Wx1@4Ω | |
| Class | Class D | |
| Power Supply Rejection Ratio (PSRR) | 61.8dB |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Audio Amplifiers | |
| Manufacturer | TI | |
| Packaging | DSBGA-9 | |
| Voltage - Supply | 2.4V~5.5V | |
| Quiescent Current | 2.8mA | |
| Features | Filterless architecture;Enable/shutdown function;Automatic mute/no-noise switch | |
| Total Harmonic Distortion + Noise (THD+N) | 0.04% | |
| Operating Temperature | -40℃~+85℃ |
| Type | Description | |
|---|---|---|
| Number of Inputs | - | |
| Signal-to-Noise Ratio | 93dB | |
| Speaker Channels | 1-Channel | |
| Efficiency | 80%;86%;88% | |
| Output Power | 2.1Wx1@4Ω | |
| Class | Class D | |
| Power Supply Rejection Ratio (PSRR) | 61.8dB |
Introduction
The LM4671 is a single supply, high efficiency 2.5W switching audio amplifier. A low noise, filterless PWM architecture eliminates the output filter, reducing external component count, board area consumption, system cost, and simplifying design. The LM4671 is designed to meet the demands of mobile phones and other portable communication devices. Operating on a single 5V supply, it is capable of driving a 4Ω speaker load at a continuous average output of 2.1W with less than 1% THD+N. Its flexible power supply requirements allow operation from 2.4V to 5.5V. The LM4671 has high efficiency with speaker loads compared to a typical Class AB amplifier. With a 3V supply driving an 8Ω speaker, the IC's efficiency for a 100mW power level is 80%, reaching 88% at 400mW output power. The LM4671 features a low-power consumption shutdown mode. Shutdown may be enabled by driving the Shutdown pin to a logic low (GND). The gain of the LM4671 is externally configurable which allows independent gain control from multiple sources by summing the signals.
Features
- No Output Filter Required for Inductive Loads
- Externally Configurable Gain
- Very Fast Turn On Time: 17μs (typ)
- Minimum External Components
- "Click and pop" Suppression Circuitry
- Micro-Power Shutdown Mode
- Available in Space-Saving DSBGA Package
Applications
- Mobile Phones
- PDAs
- Portable Electronic Devices
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Audio Amplifiers | |
| Manufacturer | TI | |
| Packaging | DSBGA-9 | |
| Voltage - Supply | 2.4V~5.5V | |
| Quiescent Current | 2.8mA | |
| Features | Filterless architecture;Enable/shutdown function;Automatic mute/no-noise switch | |
| Total Harmonic Distortion + Noise (THD+N) | 0.04% | |
| Operating Temperature | -40℃~+85℃ | |
| Number of Inputs | - | |
| Signal-to-Noise Ratio | 93dB | |
| Speaker Channels | 1-Channel | |
| Efficiency | 80%;86%;88% | |
| Output Power | 2.1Wx1@4Ω | |
| Class | Class D | |
| Power Supply Rejection Ratio (PSRR) | 61.8dB |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Audio Amplifiers | |
| Manufacturer | TI | |
| Packaging | DSBGA-9 | |
| Voltage - Supply | 2.4V~5.5V | |
| Quiescent Current | 2.8mA | |
| Features | Filterless architecture;Enable/shutdown function;Automatic mute/no-noise switch | |
| Total Harmonic Distortion + Noise (THD+N) | 0.04% | |
| Operating Temperature | -40℃~+85℃ |
| Type | Description | |
|---|---|---|
| Number of Inputs | - | |
| Signal-to-Noise Ratio | 93dB | |
| Speaker Channels | 1-Channel | |
| Efficiency | 80%;86%;88% | |
| Output Power | 2.1Wx1@4Ω | |
| Class | Class D | |
| Power Supply Rejection Ratio (PSRR) | 61.8dB |
Introduction
The LM4671 is a single supply, high efficiency 2.5W switching audio amplifier. A low noise, filterless PWM architecture eliminates the output filter, reducing external component count, board area consumption, system cost, and simplifying design. The LM4671 is designed to meet the demands of mobile phones and other portable communication devices. Operating on a single 5V supply, it is capable of driving a 4Ω speaker load at a continuous average output of 2.1W with less than 1% THD+N. Its flexible power supply requirements allow operation from 2.4V to 5.5V. The LM4671 has high efficiency with speaker loads compared to a typical Class AB amplifier. With a 3V supply driving an 8Ω speaker, the IC's efficiency for a 100mW power level is 80%, reaching 88% at 400mW output power. The LM4671 features a low-power consumption shutdown mode. Shutdown may be enabled by driving the Shutdown pin to a logic low (GND). The gain of the LM4671 is externally configurable which allows independent gain control from multiple sources by summing the signals.
Features
- No Output Filter Required for Inductive Loads
- Externally Configurable Gain
- Very Fast Turn On Time: 17μs (typ)
- Minimum External Components
- "Click and pop" Suppression Circuitry
- Micro-Power Shutdown Mode
- Available in Space-Saving DSBGA Package
Applications
- Mobile Phones
- PDAs
- Portable Electronic Devices
C2864949 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |

