LCSC Electronics logoLCSC Electronics svg logo
Entrar
USD
Carrinho
TI TPS71818-33DRVT product image
Imagens ilustrativas

TI TPS71818-33DRVT

Fabricante
TI
Cód. da peça
TPS71818-33DRVT
Nº LCSC
C2860697
Emb.
WSON-6-EP(2x2)
Número do Cliente
Atrib. princ.
200mA, high PSRR, dual-channel low-dropout regulator with enable function
Folha de DadosTI TPS71818-33DRVT
Conformidade RoHS1 documentos disponíveis
Fora de estoque
Avise-me
Mínimo: 1Múltiplo: 1Unidade de venda: Piece
Adicionar à Lista BOM
Qtd.Preço unit.(Apenas para referência)Valor total
1+$ 2.8872$ 2.89
250+$ 1.1178$ 279.45
500+$ 1.0782$ 539.10
1,000+$ 1.0591$ 1059.10
Encapsulamento Padrão250/Full Reel
Melhor preço para maior quantidade?
$

Especificações do Produto

Tudo
TipoDescrição
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
FabricanteTI
Emb.WSON-6-EP(2x2)
Output Voltage1.8V;3.3V
Number of Outputs2
Operating Temperature-40℃~+125℃@(Tj)
Supply Current (Iq)90uA
Output ConfigurationPositive
Output Current200mA
Operating Voltage6.5V
FeaturesEnable control;Over Current Protection;Thermal shutdown;Input under-voltage protection
Output TypeFixed
Ajuda e FeedbackMostrar produtos similares (0) >

Descrição

Tradução por IA

Dual, 200mA High-Performance LDOs Low Total Quiescent Current: 90μA with Both LDOs Enabled Low Noise: 70μV_RMS/V Active Output Pulldown (TPS719xx) Independent Enables for Each LDO PSRR: 65dB at 1kHz, 45dB at 1MHz Available in Multiple Fixed-Output Voltage Combinations from 0.9V to 3.6V Using Innovative Factory EEPROM Programming Fast Start-Up Time: 160μs Over-Current, Over-Temperature and Under-Voltage Protection Low Dropout: 230mV at 200mA Stable with μF Ceramic Output Capacitor Available in 2mm×2mm SON-6 and 6-Ball WCSP Packages

The TPS718xx and TPS719xx families of low-dropout (LDO) regulators offer a high power-supply rejection ratio (PSRR), low noise, fast start-up, and excellent line and load transient responses while consuming a very low 90μA (typical) at no load ground current with both LDOs enabled. The TPS719xx also provides an active pulldown circuit to quickly discharge output loads. The TPS718xx and TPS719xx are stable with ceramic capacitors and use an advanced BiCMOS fabrication process to yield a typical dropout voltage of 230mV at 200mA output loads. The TPS718xx and TPS719xx also use a precision voltage reference and feedback loop to achieve 3% overall accuracy over all load, line, process, and temperature variations. Both families of devices are fully specified from T_J=-40°C to +125°C and are offered in 2mm×2mm SON-6 and 6-ball Wafer Chip-Scale (WCSP) packages that are ideal for applications such as mobile handsets and WLAN that require good thermal dissipation while maintaining a very small footprint.

Recursos

Tradução por IA
  • Dual, 200mA High-Performance LDOs
  • Low Total Quiescent Current: 90μA with Both LDOs Enabled
  • Low Noise: 70μV_RMS/V
  • Active Output Pulldown (TPS719xx)
  • Independent Enables for Each LDO
  • PSRR: 65dB at 1kHz, 45dB at 1MHz
  • Available in Multiple Fixed-Output Voltage Combinations from 0.9V to 3.6V Using Innovative Factory EEPROM Programming
  • Fast Start-Up Time: 160μs
  • Over-Current, Over-Temperature and Under-Voltage Protection
  • Low Dropout: 230mV at 200mA
  • Stable with μF Ceramic Output Capacitor
  • Available in 2mm×2mm SON-6 and 6-Ball WCSP Packages

Aplicações

Tradução por IA
  • Digital Cameras and Camera Modules
  • Cellular Camera and TV Phones
  • Wireless LAN
  • Handheld Products