TI INA180A4QDBVRQ1
| Manufacturer | |
| MPN | INA180A4QDBVRQ1 |
| LCSC Part # | C2059662 |
| Packaging | SOT-23-5 |
| Customer # | |
| Key Attributes | 1 150uV -200mV~26V 2V/us 100dB 197uA 200V/V SOT-23-5 Instrumentation, Op Amps, Buffer Amps RoHS |
| Datasheet | TI INA180A4QDBVRQ1 |
| RoHS Compliance | 2 documents available |
| Alternative Parts | 5 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps | |
| Manufacturer | TI | |
| Packaging | SOT-23-5 | |
| Output Current | - | |
| Number of Channels | 1 | |
| Vos - Input Offset Voltage | 150uV | |
| Vcm - Common Mode Voltage | -200mV~26V | |
| Slew Rate | 2V/us | |
| Operating Temperature | -40℃~+125℃ | |
| Common Mode Rejection Ratio(CMRR) | 100dB | |
| Ib - Input Bias Current | 100nA;80uA | |
| Input Offset Voltage Drift(Vos TC) | 1uV/℃ | |
| -3dB Bandwidth | 105kHz | |
| Quiescent Current | 197uA | |
| Gain | 200V/V | |
| Features | High-side detection;Low-side detection;Analog output interface;External shunt | |
| Input Voltage Noise Density | - | |
| Differential Voltage | ±28V | |
| Dual Supply | - | |
| Single Supply | 2.7V~5.5V |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps | |
| Manufacturer | TI | |
| Packaging | SOT-23-5 | |
| Output Current | - | |
| Number of Channels | 1 | |
| Vos - Input Offset Voltage | 150uV | |
| Vcm - Common Mode Voltage | -200mV~26V | |
| Slew Rate | 2V/us | |
| Operating Temperature | -40℃~+125℃ | |
| Common Mode Rejection Ratio(CMRR) | 100dB |
| Type | Description | |
|---|---|---|
| Ib - Input Bias Current | 100nA;80uA | |
| Input Offset Voltage Drift(Vos TC) | 1uV/℃ | |
| -3dB Bandwidth | 105kHz | |
| Quiescent Current | 197uA | |
| Gain | 200V/V | |
| Features | High-side detection;Low-side detection;Analog output interface;External shunt | |
| Input Voltage Noise Density | - | |
| Differential Voltage | ±28V | |
| Dual Supply | - | |
| Single Supply | 2.7V~5.5V |
Introduction
INA180-Q1, INA2180-Q1, and INA4180-Q1 (INAx180-Q1) are automotive-grade 26V common-mode current sense amplifiers suitable for both low-side and high-side configurations. These purpose-built current sense amplifiers accurately measure the voltage developed across a current sense resistor at common-mode voltages well beyond the supply voltage powering the device. Current can be measured on input voltage rails up to 26V, while the device can be powered from supply voltages as low as 2.7V.
Features
- AEC-Q100 qualified for automotive applications
- Temperature Grade 1: -40°C ≤ TA ≤ +125°C
- HBM ESD Classification Level 2
- CDM ESD Classification Level C6
- Functional Safety documentation available to aid functional safety system design
- Common-mode range (VCM): -0.2V to +26V
- High bandwidth: 350kHz (A1 device)
- Offset voltage:
- ±150μV (maximum) at VCM = 0V
- ±500μV (maximum) at VCM = 12V
- Output slew rate: 2V/μs
- Accuracy:
- ±1% gain error (maximum)
- 1μV/°C temperature drift (maximum)
- Gain options:
- 20V/V (A1 device)
- 50V/V (A2 device)
- 100V/V (A3 device)
- 200V/V (A4 device)
- Quiescent current: 260μA (maximum) (INA180-Q1)
Applications
- Motor control
- Battery monitoring
- Power management
- Lighting control overcurrent detection
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps | |
| Manufacturer | TI | |
| Packaging | SOT-23-5 | |
| Output Current | - | |
| Number of Channels | 1 | |
| Vos - Input Offset Voltage | 150uV | |
| Vcm - Common Mode Voltage | -200mV~26V | |
| Slew Rate | 2V/us | |
| Operating Temperature | -40℃~+125℃ | |
| Common Mode Rejection Ratio(CMRR) | 100dB | |
| Ib - Input Bias Current | 100nA;80uA | |
| Input Offset Voltage Drift(Vos TC) | 1uV/℃ | |
| -3dB Bandwidth | 105kHz | |
| Quiescent Current | 197uA | |
| Gain | 200V/V | |
| Features | High-side detection;Low-side detection;Analog output interface;External shunt | |
| Input Voltage Noise Density | - | |
| Differential Voltage | ±28V | |
| Dual Supply | - | |
| Single Supply | 2.7V~5.5V |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps | |
| Manufacturer | TI | |
| Packaging | SOT-23-5 | |
| Output Current | - | |
| Number of Channels | 1 | |
| Vos - Input Offset Voltage | 150uV | |
| Vcm - Common Mode Voltage | -200mV~26V | |
| Slew Rate | 2V/us | |
| Operating Temperature | -40℃~+125℃ | |
| Common Mode Rejection Ratio(CMRR) | 100dB |
| Type | Description | |
|---|---|---|
| Ib - Input Bias Current | 100nA;80uA | |
| Input Offset Voltage Drift(Vos TC) | 1uV/℃ | |
| -3dB Bandwidth | 105kHz | |
| Quiescent Current | 197uA | |
| Gain | 200V/V | |
| Features | High-side detection;Low-side detection;Analog output interface;External shunt | |
| Input Voltage Noise Density | - | |
| Differential Voltage | ±28V | |
| Dual Supply | - | |
| Single Supply | 2.7V~5.5V |
Introduction
INA180-Q1, INA2180-Q1, and INA4180-Q1 (INAx180-Q1) are automotive-grade 26V common-mode current sense amplifiers suitable for both low-side and high-side configurations. These purpose-built current sense amplifiers accurately measure the voltage developed across a current sense resistor at common-mode voltages well beyond the supply voltage powering the device. Current can be measured on input voltage rails up to 26V, while the device can be powered from supply voltages as low as 2.7V.
Features
- AEC-Q100 qualified for automotive applications
- Temperature Grade 1: -40°C ≤ TA ≤ +125°C
- HBM ESD Classification Level 2
- CDM ESD Classification Level C6
- Functional Safety documentation available to aid functional safety system design
- Common-mode range (VCM): -0.2V to +26V
- High bandwidth: 350kHz (A1 device)
- Offset voltage:
- ±150μV (maximum) at VCM = 0V
- ±500μV (maximum) at VCM = 12V
- Output slew rate: 2V/μs
- Accuracy:
- ±1% gain error (maximum)
- 1μV/°C temperature drift (maximum)
- Gain options:
- 20V/V (A1 device)
- 50V/V (A2 device)
- 100V/V (A3 device)
- 200V/V (A4 device)
- Quiescent current: 260μA (maximum) (INA180-Q1)
Applications
- Motor control
- Battery monitoring
- Power management
- Lighting control overcurrent detection
C2059662 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542339000 |
| USHTS | 8542330001 |
| TARIC | 8542339000 |
| Type | Details |
|---|---|
| CAHTS | 8542330000 |
| BRHTS | 85423390 |
| INHTS | 85423300 |
| MXHTS | 8542.33.99 |



