SILICON LABS MGM210PA32JIA2R

The MGM210P is a module designed and built to meet the performance, security, and reliability requirements of line-powered IoT products for mesh networks. Based on the EFR32MG21 SoC, it enables Zigbee, OpenThread, Bluetooth and multi-protocol connectivity (Zigbee + Bluetooth) while delivering best-in-class RF range and performance, future-proof capability for feature and OTA firmware updates, state-of-the-art security, low active current consumption, and a temperature rating suited for operation in demanding environmental conditions. The MGM210P is a complete solution that comes with robust and fully-upgradeable software stacks, world-wide regulatory certifications, advanced development and debugging tools, and support that will simplify and minimize the development cycle and deployment of your end-product helping to accelerate its time-to-market.

• Zigbee, OpenThread, Bluetooth 5.1, and multi-protocol connectivity
• Built-in antenna and RF pin
• +10 and +20 dBm TX power variants
• -103.9 dBm 802.15.4 RX sensitivity
• -97.0 dBm Bluetooth RX sensitivity at 1 Mbps
• 32-bit ARM Cortex-M33 core at 38.4 MHz
• 1024/96 kB of Flash/RAM memory
• Secure Element or Secure Vault
• Optimal set of MCU peripherals
• 20 GPIO pins
• -40 to +125 °C
• 12.9 mm x 15.0 mm x 2.2 mm
• Supported Protocols: Zigbee, OpenThread, Bluetooth 5.1, Bluetooth Mesh, Multi-protocol (Zigbee + Bluetooth 5.1)
• Wireless System-on-Chip: 2.4 GHz radio, TX power up to +20 dBm, 32-bit ARM Cortex-M33 with DSP instruction and floating-point unit for efficient signal processing, 1024 kB flash program memory, 96 kB RAM data memory, Embedded Trace Macrocell (ETM) for advanced debugging
• Receiver Performance: -103.9 dBm sensitivity (1% PER) at 250 kbps O-QPSK DSSS, -104.5 dBm sensitivity (0.1% BER) at 125 kbps GFSK, -100.1 dBm sensitivity (0.1% BER) at 500 kbps GFSK, -97.0 dBm sensitivity (0.1% BER) at 1 Mbps GFSK, -94.1 dBm sensitivity (0.1% BER) at 2 Mbps GFSK
• Current Consumption: 9.4 mA RX current at 250 kbps O-QPSK DSSS, 9.3 mA RX current at 1 Mbps GFSK, 16.1 mA TX current at 0 dBm (MGM210Px22), 34.1 mA TX current at 10 dBm (MGM210Px22), 181.3 mA TX current at 20 dBm (MGM210Px32), 50.9 μA/MHz in Active Mode (EM0), 5.1 μA EM2 DeepSleep current (RTCC running from LFXO, Bluetooth Stack not running), 8.5 μA EM2 DeepSleep current (RTCC running from LFXO, Bluetooth Stack running)
• Regulatory Certifications: CE, ISED, FCC, South Korea, Japan
• Security: Secure Boot with Root of Trust and Secure Loader (RTSL), Hardware Cryptographic Acceleration for AES128/192/256, ChaCha20-Poly1305, SHA-1, SHA-2/256/384/512, ECDSA + ECDH (P-192, P-256, P-384, P-521), Ed25519 and Curve25519, J-PAKE, PBKDF2, True Random Number Generator (TRNG) compliant with NIST SP800-90 and AIS-31, ARM TrustZone, Secure Debug Interface lock/unlock, DPA Countermeasures, Secure Key Management with PUF, Anti-Tamper, Secure Attestation
• MCU Peripherals: 12-bit 1 Msps SAR Analog to Digital Converter (ADC), 2x Analog Comparator (ACMP), 20 General Purpose I/O pins with output state retention and asynchronous interrupts, 8 Channel DMA Controller, 12 Channel Peripheral Reflex System (PRS), 3x16-bit Timer/Counter (3 Compare/Capture/PWM channels), 1x32-bit Timer/Counter (3 Compare/Capture/PWM channels), 32-bit Real Time Counter, 24-bit Low Energy Timer for waveform generation, 2x Watchdog Timer, 3x Universal Synchronous/Asynchronous Receiver/Transmitter (UART/SPI/SmartCard (ISO 7816)/IrDA/I2S), 2x I²C interface with SMBus support

• Smart home
• Connected lighting
• Building automation and security