MAXIM MAX503CAG+

The MAX503 is a low-power, 10-bit, voltage-output digital-to-analog converter (DAC) that uses single 5V or dual ±5V supplies. This device has an internal voltage reference plus an output buffer amplifier. Operating current is only 250μA from a single 5V supply, making it ideal for portable and battery-powered applications. In addition, the shrink small-outline package (SSOP) measures only 0.1 square inches, using less board area than an 8-pin DIP. 10-bit resolution is achieved through laser trimming of the DAC, op amp, and reference. No further adjustments are necessary. Internal gain-setting resistors can be used to define a DAC output voltage range of 0V to +2.048V, 0V to +4.096V, or ±2.048V. Four-quadrant multiplication is possible without the use of external resistors or op amps. The parallel logic inputs are double buffered and are compatible with 4-bit, 8-bit, and 16-bit microprocessors.

• Buffered Voltage Output
• Internal 2.048V Voltage Reference
• Operates from Single 5V or Dual ±5V Supplies
• Low Power Consumption: 250μA Operating Current, 40μA Shutdown-Mode Current
• SSOP Package Saves Space
• Relative Accuracy: ±1/2 LSB Max Over Temperature
• Guaranteed Monotonic Over Temperature
• 4-Quadrant Multiplication with No External Components
• Power-On Reset
• Double-Buffered Parallel Logic Inputs

• Battery-Powered Data-Conversion Products
• Minimum Component-Count Analog Systems
• Digital Offset/Gain Adjustment
• Industrial Process Control
• Arbitrary Function Generators
• Automatic Test Equipment
• Microprocessor-Controlled Calibration