onsemi NCV70514MW004AR2G
| Manufacturer | |
| MPN | NCV70514MW004AR2G |
| LCSC Part # | C895772 |
| Packaging | QFN-32-EP(5x5) |
| Customer # | |
| Key Attributes | QFN-32-EP(5x5) Motor Drivers, Controllers RoHS |
| Datasheet | onsemi NCV70514MW004AR2G |
| RoHS Compliance | 4 documents available |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | onsemi | |
| Packaging | QFN-32-EP(5x5) | |
| Drive Type | Bipolar Driver | |
| Number of H-bridges | 2 | |
| Features | Motor step-out prevention function;Overcurrent Protection;Over temperature protection;Under-voltage lockout;Thermal warning;Short-Circuit Protection | |
| Technology | Yes | |
| Interface | SPI;STEP/DIR | |
| Operating Temperature | -40℃~+145℃ | |
| Step Resolution | 32 | |
| Output Current | 800mA | |
| Control Voltage | - | |
| RDS(on) | 1.8Ω | |
| Motor Drive Voltage(Vm) | - |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | onsemi | |
| Packaging | QFN-32-EP(5x5) | |
| Drive Type | Bipolar Driver | |
| Number of H-bridges | 2 | |
| Features | Motor step-out prevention function;Overcurrent Protection;Over temperature protection;Under-voltage lockout;Thermal warning;Short-Circuit Protection | |
| Technology | Yes |
| Type | Description | |
|---|---|---|
| Interface | SPI;STEP/DIR | |
| Operating Temperature | -40℃~+145℃ | |
| Step Resolution | 32 | |
| Output Current | 800mA | |
| Control Voltage | - | |
| RDS(on) | 1.8Ω | |
| Motor Drive Voltage(Vm) | - |
Introduction
NCV70514 is a microstepping motor driver for bipolar stepper motors. The device interfaces with an external microcontroller via I/O pins and an SPI interface. The NCV70514 contains a current conversion table and advances to the next microstep based on the clock signal on the "NXT" input pin and the state of the "DIR" (= direction) register or input pin. The device provides error information upon detection of stall, electrical fault, undervoltage, or elevated junction temperature. It employs a proprietary PWM algorithm for reliable current control. The NCV70514 is fully compliant with automotive voltage requirements, making it well-suited for general-purpose stepper motor applications in automotive, industrial, medical, and marine environments. Due to its technical characteristics, the device is particularly suitable for applications subject to battery supply voltage fluctuations.
Features
- Dual H-bridge for two-phase stepper motors
- Programmable peak current up to 800mA
- Low temperature rise boost current (NCV70514MW007 device only)
- On-chip current converter
- SPI interface with daisy-chain capability
- 7 step modes, from full-step to 32 microsteps
- Fully integrated current sensing and current regulation
- On-chip stall detection
- PWM current control with automatic fast and slow decay selection
- Fixed PWM frequency
- Active freewheeling diode
- Full output protection and diagnostics
- Thermal warning and shutdown
- Compatible with 3.3V MCU, 5V tolerant inputs, 5V tolerant open-drain outputs
- Reset function
- Overcurrent protection
- Enhanced undervoltage management
- Step mode selection inputs
- Lead-free, halogen-free/brominated flame retardant-free, RoHS compliant
Applications
- Small positioning applications
- Automotive (headlamp alignment, HVAC, idle control, cruise control)
- Industrial equipment (lighting, fluid control, labeling, process control, XYZ tables, robotics)
- Building automation (HVAC, surveillance, satellite antennas, renewable energy systems)
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | onsemi | |
| Packaging | QFN-32-EP(5x5) | |
| Drive Type | Bipolar Driver | |
| Number of H-bridges | 2 | |
| Features | Motor step-out prevention function;Overcurrent Protection;Over temperature protection;Under-voltage lockout;Thermal warning;Short-Circuit Protection | |
| Technology | Yes | |
| Interface | SPI;STEP/DIR | |
| Operating Temperature | -40℃~+145℃ | |
| Step Resolution | 32 | |
| Output Current | 800mA | |
| Control Voltage | - | |
| RDS(on) | 1.8Ω | |
| Motor Drive Voltage(Vm) | - |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Motor Drivers, Controllers | |
| Manufacturer | onsemi | |
| Packaging | QFN-32-EP(5x5) | |
| Drive Type | Bipolar Driver | |
| Number of H-bridges | 2 | |
| Features | Motor step-out prevention function;Overcurrent Protection;Over temperature protection;Under-voltage lockout;Thermal warning;Short-Circuit Protection | |
| Technology | Yes |
| Type | Description | |
|---|---|---|
| Interface | SPI;STEP/DIR | |
| Operating Temperature | -40℃~+145℃ | |
| Step Resolution | 32 | |
| Output Current | 800mA | |
| Control Voltage | - | |
| RDS(on) | 1.8Ω | |
| Motor Drive Voltage(Vm) | - |
Introduction
NCV70514 is a microstepping motor driver for bipolar stepper motors. The device interfaces with an external microcontroller via I/O pins and an SPI interface. The NCV70514 contains a current conversion table and advances to the next microstep based on the clock signal on the "NXT" input pin and the state of the "DIR" (= direction) register or input pin. The device provides error information upon detection of stall, electrical fault, undervoltage, or elevated junction temperature. It employs a proprietary PWM algorithm for reliable current control. The NCV70514 is fully compliant with automotive voltage requirements, making it well-suited for general-purpose stepper motor applications in automotive, industrial, medical, and marine environments. Due to its technical characteristics, the device is particularly suitable for applications subject to battery supply voltage fluctuations.
Features
- Dual H-bridge for two-phase stepper motors
- Programmable peak current up to 800mA
- Low temperature rise boost current (NCV70514MW007 device only)
- On-chip current converter
- SPI interface with daisy-chain capability
- 7 step modes, from full-step to 32 microsteps
- Fully integrated current sensing and current regulation
- On-chip stall detection
- PWM current control with automatic fast and slow decay selection
- Fixed PWM frequency
- Active freewheeling diode
- Full output protection and diagnostics
- Thermal warning and shutdown
- Compatible with 3.3V MCU, 5V tolerant inputs, 5V tolerant open-drain outputs
- Reset function
- Overcurrent protection
- Enhanced undervoltage management
- Step mode selection inputs
- Lead-free, halogen-free/brominated flame retardant-free, RoHS compliant
Applications
- Small positioning applications
- Automotive (headlamp alignment, HVAC, idle control, cruise control)
- Industrial equipment (lighting, fluid control, labeling, process control, XYZ tables, robotics)
- Building automation (HVAC, surveillance, satellite antennas, renewable energy systems)
C895772 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |

