LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

ADI AD8582ARZ-REEL

Manufacturer
MPN
AD8582ARZ-REEL
LCSC Part #
C652980
Packaging
SOIC-24-300mil
Customer #
Key Attributes
AD8582 Complete Dual 12bit DAC
DatasheetADI AD8582ARZ-REEL
RoHS Compliance1 documents available
Alternative Parts5
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Data Acquisition/Digital to Analog Converters (DAC)
ManufacturerADI
PackagingSOIC-24-300mil
Settling Time16us
Quiescent Current (Iq)4mA
Operating Temperature-40℃~+85℃
Voltage - Supply4.75V~5.25V
FunctionMulti-chip synchronization;Built-in reference source;Integrated buffer;Power-on reset
Integral non - linearity2LSB
Number of Channels2
Resolution (Bits)12;-
Interface TypeParallel

Introduction

AI Translation

The AD8582 is a complete, parallel input, dual 12-bit, voltage output DAC designed to operate from a single +5 volt supply. Built using a CBCMOS process, this monolithic DAC offers the user low cost, and ease-of-use in +5 volt only systems. Included on the chip, in addition to the DACs, are a rail-to-rail amplifier, latch and reference. The reference (V_REF) is trimmed to 2.5 volts output, and the on-chip amplifier gains up the DAC output to 4.095 volts full scale. The user needs only supply a +5 volt supply. The AD8582 is coded natural binary. The op amp output swings from 0 volt to +4.095 volts for a one-millivolt-per-bit resolution, and is capable of driving ±5 mA. Operation down to 4.3 V is possible with output load currents less than 1 mA. The high speed parallel data interface connects to the fastest processors without wait states. The double-buffered input structure allows the user to load the input registers one at a time, then a single load strobe tied to both LDA+LDB inputs will update both DAC outputs simultaneously. LDA and LDB can also be activated independently to immediately update their respective DAC registers. An address input decodes DAC A or DAC B when the chip select CS input is strobed. An asynchronous reset input sets the output to zero scale. The MSB bit can be used to establish a preset to midscale when the reset input is strobed. The AD8582 is available in the 24-pin plastic DIP and the surface mount SOIC-24. Each part is fully specified for operation over -40°C to +85°C, and the full +5 V± 5% power supply range.

Features

AI Translation
  • Complete Dual 12-Bit DAC
  • No External Components
  • Single +5 Volt Operation
  • 1 mV/Bit with 4.095 V Full Scale
  • True Voltage Output, ±5 mA Drive
  • Very Low Power: 5 mW

Applications

AI Translation
  • Digitally Controlled Calibration
  • Portable Equipment
  • Servo Controls
  • Process Control Equipment
  • PC Peripherals