LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

MICROCHIP KSZ9021RLI

Manufacturer
MPN
KSZ9021RLI
LCSC Part #
C634222
Packaging
LQFP-64(10x10)
Customer #
Key Attributes
2.5V~3.3V 4mA 4mA LQFP-64(10x10) Drivers, Receivers, Transceivers RoHS
DatasheetMICROCHIP KSZ9021RLI
RoHS Compliance2 documents available
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers
ManufacturerMICROCHIP
PackagingLQFP-64(10x10)
Logic FamilyKSZ9021RL
Voltage - Supply2.5V~3.3V
Current - Output Low(IOL)4mA
Operating Temperature-40℃~+85℃
Current - Output High(IOH)4mA
Features-

Introduction

AI Translation

The KSZ9021RL is a completely integrated triple speed (10Base-T/100Base-TX/1000Base-T) Ethernet Physical Layer Transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable. The KSZ9021RL provides the Reduced Gigabit Media Independent Interface (RGMII) for direct connection to RGMII MACs in Gigabit Ethernet Processors and Switches for data transfer at 10/100/1000Mbps speed. The KSZ9021RL reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating a LDO controller to drive a low cost MOSFET to supply the 1.2V core. The KSZ9021RL provides diagnostic features to facilitate system bring-up and debugging in production testing and in product deployment. Parametric NAND tree support enables fault detection between KSZ9021 I/Os and board. Micrel LinkMD® TDR-based cable diagnostics permit identification of faulty copper cabling. Remote and local loopback functions provide verification of analog and digital data paths. The KSZ9021RL is available in a 64-pin, RoHS compliant E-LQFP package, and is offered as the KSZ9021RN in the smaller 48-pin QFN package.

Features

AI Translation
  • Single-chip 10/100/1000Mbps IEEE 802.3 compliant Ethernet Transceiver
  • RGMII interface compliant to RGMII Version 1.3
  • RGMII I/Os with 3.3V/2.5V tolerant and programmable timings to adjust and correct delays on both Tx and Rx paths
  • Auto-negotiation to automatically select the highest link up speed (10/100/100Mbps) and duplex (half/full)
  • On-chip termination resistors for the differential pairs
  • On-chip LDO controller to support single 3.3V supply operation – requires only external FET to generate 1.2V for the core
  • Jumbo frame support up to 16KB
  • 125MHz Reference Clock Output
  • Programmable LED outputs for link, activity and speed
  • Baseline Wander Correction
  • LinkMD® TDR-based cable diagnostics for identification of faulty copper cabling
  • Parametric NAND Tree support for fault detection between chip I/Os and board
  • Loopback modes for diagnostics
  • Automatic MDI/MDI-X crossover for detection and correction of pair swap at all speeds of operation
  • Automatic detection and correction of pair swap, pair skew and pair polarity
  • MDC/MDIO Management Interface for PHY register configuration
  • Interrupt pin option
  • Power down and power saving modes
  • Operating Voltages - Core: 1.2V (external FET or regulator) - I/O: 3.3V or 2.5V - Transceiver: 3.3V

Applications

AI Translation
  • Laser/Network printer
  • Network attached storage (NAS)
  • Network server
  • Gigabit LAN on motherboard (GLOM)
  • Broadband gateway
  • Gigabit SOHO/SMB router
  • IPTV
  • IP Set-top box
  • Game console
  • Triple-play (data, voice, video) media center
  • Media converter