Shanghai Prisemi Elec PSC5425E
| Manufacturer | Shanghai Prisemi ElecAsian Brands |
| MPN | PSC5425E |
| LCSC Part # | C496547 |
| Packaging | WLCSP-20 |
| Customer # | |
| Key Attributes | I2C Lithium Battery 2.25A WLCSP-20 Battery Management |
| Datasheet | Shanghai Prisemi Elec PSC5425E |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Battery Management | |
| Manufacturer | Shanghai Prisemi Elec | |
| Packaging | WLCSP-20 | |
| Operating Temperature | -25℃~+85℃ | |
| Interface | I2C | |
| Quiescent Current | - | |
| 0V Battery Charge | - | |
| Type of Battery | Lithium Battery | |
| Operating Voltage | 6V~29V | |
| Features | Constant current charging;Constant voltage charging;Programmable charging current;Automatic recharge;Soft-start | |
| The Chip Type | Charging IC | |
| Balance Current | - | |
| Charge Current - Max | 2.25A |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Battery Management | |
| Manufacturer | Shanghai Prisemi Elec | |
| Packaging | WLCSP-20 | |
| Operating Temperature | -25℃~+85℃ | |
| Interface | I2C | |
| Quiescent Current | - | |
| 0V Battery Charge | - |
| Type | Description | |
|---|---|---|
| Type of Battery | Lithium Battery | |
| Operating Voltage | 6V~29V | |
| Features | Constant current charging;Constant voltage charging;Programmable charging current;Automatic recharge;Soft-start | |
| The Chip Type | Charging IC | |
| Balance Current | - | |
| Charge Current - Max | 2.25A |
Introduction
The PSC5425E combines a highly integrated switch-mode charger, to minimize single-cell Lithium-ion (Li-ion) charging time from a USB power source, and a boost regulator to power a USB peripheral from the battery. The charging parameters and operating modes are programmable through an I²C interface. The charger and boost regulator circuits switch at select-able frequency to lower the EMI and minimize the size of external passive components. The PSC5425E provides battery charging in three phases: conditioning, constant current, and constant voltage. To ensure USB compliance and minimize charging time, the input current is limited to the value set through the I²C host. Charge termination current is programmable through the I²C host. The integrated circuit (IC) automatically restarts the charge cycle when the battery falls below an internal threshold. If the input source is removed, the IC enters a high-impedance mode with leakage from the battery to the input prevented. Charge status is reported back to the host through the I²C port. The PSC5425E can operate as a boost regulator on command from the system. The boost regulator includes a soft-start that limits inrush current from the battery. The PSC5425E is available in a 20-bump, 0.4mm pitch WLCSP package.
Features
- Fully Integrated, High-Efficiency Charger for Single-Cell Li-lon and Li-Polymer Battery Packs
- Faster Charging than Linear
- Charge Voltage Accuracy: ±0.5% 25°C
- ±5% Charge Current Regulation Accuracy
- 29V Absolute Maximum Input Voltage
- 6V Maximum Input Operating Voltage
- 2.25A Maximum Charge Rate
- Programmable through I²C Interface: -Input Current -Fast-Charge/Termination Current -Charger Voltage -Termination Enable
- Synchronous Buck PWM Controller with Wide Duty Cycle Range
- Small Footprint 1μH External Inductor
- Weak Input Sources Accommodated by Reducing Charging Current to Maintain Minimum VBUS Voltage
- Low Reverse Leakage to Prevent Battery Drain to VBUS
- 5V, 700mA Boost Mode for USB OTG for 3.3 to 4.5V Battery Input
Applications
- Cellular Phones, Smart Phones, PDAs
- Tablet, Portable Media Players
- Gaming Device, Digital Cameras
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Battery Management | |
| Manufacturer | Shanghai Prisemi Elec | |
| Packaging | WLCSP-20 | |
| Operating Temperature | -25℃~+85℃ | |
| Interface | I2C | |
| Quiescent Current | - | |
| 0V Battery Charge | - | |
| Type of Battery | Lithium Battery | |
| Operating Voltage | 6V~29V | |
| Features | Constant current charging;Constant voltage charging;Programmable charging current;Automatic recharge;Soft-start | |
| The Chip Type | Charging IC | |
| Balance Current | - | |
| Charge Current - Max | 2.25A |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Battery Management | |
| Manufacturer | Shanghai Prisemi Elec | |
| Packaging | WLCSP-20 | |
| Operating Temperature | -25℃~+85℃ | |
| Interface | I2C | |
| Quiescent Current | - | |
| 0V Battery Charge | - |
| Type | Description | |
|---|---|---|
| Type of Battery | Lithium Battery | |
| Operating Voltage | 6V~29V | |
| Features | Constant current charging;Constant voltage charging;Programmable charging current;Automatic recharge;Soft-start | |
| The Chip Type | Charging IC | |
| Balance Current | - | |
| Charge Current - Max | 2.25A |
Introduction
The PSC5425E combines a highly integrated switch-mode charger, to minimize single-cell Lithium-ion (Li-ion) charging time from a USB power source, and a boost regulator to power a USB peripheral from the battery. The charging parameters and operating modes are programmable through an I²C interface. The charger and boost regulator circuits switch at select-able frequency to lower the EMI and minimize the size of external passive components. The PSC5425E provides battery charging in three phases: conditioning, constant current, and constant voltage. To ensure USB compliance and minimize charging time, the input current is limited to the value set through the I²C host. Charge termination current is programmable through the I²C host. The integrated circuit (IC) automatically restarts the charge cycle when the battery falls below an internal threshold. If the input source is removed, the IC enters a high-impedance mode with leakage from the battery to the input prevented. Charge status is reported back to the host through the I²C port. The PSC5425E can operate as a boost regulator on command from the system. The boost regulator includes a soft-start that limits inrush current from the battery. The PSC5425E is available in a 20-bump, 0.4mm pitch WLCSP package.
Features
- Fully Integrated, High-Efficiency Charger for Single-Cell Li-lon and Li-Polymer Battery Packs
- Faster Charging than Linear
- Charge Voltage Accuracy: ±0.5% 25°C
- ±5% Charge Current Regulation Accuracy
- 29V Absolute Maximum Input Voltage
- 6V Maximum Input Operating Voltage
- 2.25A Maximum Charge Rate
- Programmable through I²C Interface: -Input Current -Fast-Charge/Termination Current -Charger Voltage -Termination Enable
- Synchronous Buck PWM Controller with Wide Duty Cycle Range
- Small Footprint 1μH External Inductor
- Weak Input Sources Accommodated by Reducing Charging Current to Maintain Minimum VBUS Voltage
- Low Reverse Leakage to Prevent Battery Drain to VBUS
- 5V, 700mA Boost Mode for USB OTG for 3.3 to 4.5V Battery Input
Applications
- Cellular Phones, Smart Phones, PDAs
- Tablet, Portable Media Players
- Gaming Device, Digital Cameras
C496547 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| ECCN | |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| ECCN | |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |



