ALLEGRO A1260LLHLX-T
| Manufacturer | |
| MPN | A1260LLHLX-T |
| LCSC Part # | C3715916 |
| Packaging | SOT-23W |
| Customer # | |
| Key Attributes | SOT-23W Switches (Solid State) RoHS |
| Datasheet | ALLEGRO A1260LLHLX-T |
| RoHS Compliance | 1 documents available |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Magnetic Sensors/Switches (Solid State) | |
| Manufacturer | ALLEGRO | |
| Packaging | SOT-23W |
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Magnetic Sensors/Switches (Solid State) | |
| Manufacturer | ALLEGRO |
| Type | Description | |
|---|---|---|
| Packaging | SOT-23W |
Introduction
The A1260 vertical Hall-effect sensor IC is an extremely temperature-stable, stress-resistant magnetic sensing device well suited for harsh operating environments. The sensor is actuated by an alternating south- and north-polarity magnetic field in a plane parallel to the branded face of the device. Available in SOT23W surface-mount and SIP through-hole package options, the device allows sensing in a variety of orientations relative to the mounting position. Superior high-temperature performance up to a junction temperature of 175℃ is achieved through dynamic offset cancellation, a technique that reduces residual offset voltage typically caused by device encapsulation, temperature dependence, and thermal stress.
Each device integrates on a single silicon die: a voltage regulator, a Hall voltage generator, a small-signal amplifier, chopper stabilization circuitry, a Schmitt trigger, and a short-circuit-protected open-drain output capable of sinking up to 25mA. The onboard regulator allows operation from supply voltages of 3 to 24V. The low operating voltage down to 3V means the device can be used in 3.3V applications, while also allowing an additional external resistor in series with the supply pin to better protect the device against high-voltage transient events.
The output turns on when a south-pole magnetic field of sufficient strength is present perpendicular to the vertical Hall element. A north-pole magnetic field is required to turn the output off. The LH package is a modified SOT23W surface-mount package that switches when the magnetic field is perpendicular to the non-branded side of the package.
The UA package is an ultra-small SIP suitable for through-hole mounting and lead forming, switching when a magnetic field is applied to the top of the package parallel to the branded face. Both packages are RoHS-compliant and lead-free (suffix -T), with lead frames finished in 100% matte tin plating.
Features
- AEC-Q100 automotive-grade qualified
- Magnetic sensing parallel to package surface
- High-sensitivity switching threshold
- Symmetrical latch switching points
- Operates from unregulated supplies as low as 3V
- Small package footprint
- Automotive grade
- Output short-circuit protection
- Stress resistance
- Reverse battery protection
- Junction temperature range: -40℃ to 175℃
- Solid-state reliability
- Superior temperature stability
- Supply voltage zener clamp
Applications
Automotive, Commutation/Indexing, Power Shutdown/Actuator, Electronic Power Steering, BLDC Motor
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Magnetic Sensors/Switches (Solid State) | |
| Manufacturer | ALLEGRO | |
| Packaging | SOT-23W |
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Magnetic Sensors/Switches (Solid State) | |
| Manufacturer | ALLEGRO |
| Type | Description | |
|---|---|---|
| Packaging | SOT-23W |
Introduction
The A1260 vertical Hall-effect sensor IC is an extremely temperature-stable, stress-resistant magnetic sensing device well suited for harsh operating environments. The sensor is actuated by an alternating south- and north-polarity magnetic field in a plane parallel to the branded face of the device. Available in SOT23W surface-mount and SIP through-hole package options, the device allows sensing in a variety of orientations relative to the mounting position. Superior high-temperature performance up to a junction temperature of 175℃ is achieved through dynamic offset cancellation, a technique that reduces residual offset voltage typically caused by device encapsulation, temperature dependence, and thermal stress.
Each device integrates on a single silicon die: a voltage regulator, a Hall voltage generator, a small-signal amplifier, chopper stabilization circuitry, a Schmitt trigger, and a short-circuit-protected open-drain output capable of sinking up to 25mA. The onboard regulator allows operation from supply voltages of 3 to 24V. The low operating voltage down to 3V means the device can be used in 3.3V applications, while also allowing an additional external resistor in series with the supply pin to better protect the device against high-voltage transient events.
The output turns on when a south-pole magnetic field of sufficient strength is present perpendicular to the vertical Hall element. A north-pole magnetic field is required to turn the output off. The LH package is a modified SOT23W surface-mount package that switches when the magnetic field is perpendicular to the non-branded side of the package.
The UA package is an ultra-small SIP suitable for through-hole mounting and lead forming, switching when a magnetic field is applied to the top of the package parallel to the branded face. Both packages are RoHS-compliant and lead-free (suffix -T), with lead frames finished in 100% matte tin plating.
Features
- AEC-Q100 automotive-grade qualified
- Magnetic sensing parallel to package surface
- High-sensitivity switching threshold
- Symmetrical latch switching points
- Operates from unregulated supplies as low as 3V
- Small package footprint
- Automotive grade
- Output short-circuit protection
- Stress resistance
- Reverse battery protection
- Junction temperature range: -40℃ to 175℃
- Solid-state reliability
- Superior temperature stability
- Supply voltage zener clamp
Applications
Automotive, Commutation/Indexing, Power Shutdown/Actuator, Electronic Power Steering, BLDC Motor
C3715916 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |

