LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

MAXIM MAX5821MEUA+T

Manufacturer
MPN
MAX5821MEUA+T
LCSC Part #
C7460160
Packaging
MSOP-8
Customer #
Key Attributes
Dual, 10bit, Low-Power, 2-Wire, Serial Voltage-Output DAC
DatasheetMAXIM MAX5821MEUA+T
RoHS Compliance1 documents available
Alternative Parts5
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Data Acquisition/Digital to Analog Converters (DAC)
ManufacturerMAXIM
PackagingMSOP-8
Settling Time4us
Quiescent Current (Iq)300nA
Operating Temperature-40℃~+85℃
Voltage - Supply2.7V~5.5V
FunctionIntegrated buffer;Power-down mode;Power-on reset
Integral non - linearity0.5LSB
Number of Channels2
Resolution (Bits)10;-
Interface TypeI2C

Introduction

AI Translation

The MAX5821 is a dual, 10-bit, voltage-output digital-to-analog converter (DAC) with an I2C-compatible, 2-wire interface that operates at clock rates up to 400kHz. The device operates from a single 2.7V to 5.5V supply, consuming 115μA at VDD = 3.6V. A power-down mode decreases current consumption to less than 1μA. The MAX5821 features three software-selectable power-down output impedances: 100kΩ, 1kΩ, and high impedance. Other features include internal precision rail-to-rail output buffers and a power-on reset (POR) circuit that powers up the DAC in the 100kΩ power-down mode.

Features

AI Translation
  • The MAX5821 is a dual, 10-bit voltage-output, digital-to-analog converter (DAC) with an I2C-compatible, 2-wire interface that operates at clock rates up to 400kHz.
  • The device operates from a single 2.7V to 5.5V supply, consuming 115μA at VDD = 3.6V.
  • A power-down mode decreases current consumption to less than 1μA.
  • The MAX5821 features three software-selectable power-down output impedances: 100kΩ, 1kΩ, and high impedance.
  • Other features include internal precision rail-to-rail output buffers and a power-on reset (POR) circuit that powers up the DAC in the 100kΩ power-down mode.
  • The MAX5821 features a double-buffered I2C-compatible serial interface that allows multiple devices to share a single bus.
  • All logic inputs are CMOS-logic compatible and buffered with Schmitt triggers, allowing direct interfacing to optocoupled and transformer-isolated interfaces.
  • The MAX5821 minimizes digital noise feedthrough by disconnecting the clock (SCL) signal from the rest of the device when an address mismatch is detected.
  • The MAX5821 is specified over the extended temperature range of -40°C to +85°C and is available in a miniature 8-pin μMAX package.
  • Ultra-Low Supply Current 115μA at VDD = 3.6V, 135μA at VDD = 5.5V
  • 300nA Low-Power Power-Down Mode
  • Single 2.7V to 5.5V Supply Voltage
  • Fast 400kHz I2C-Compatible 2-Wire Serial Interface
  • Schmitt-Trigger Inputs for Direct Interfacing to Optocouplers
  • Rail-to-Rail Output Buffer Amplifiers
  • Three Software-Selectable Power-Down Output Impedances 100kΩ, 1kΩ, and High Impedance
  • Read-Back Mode for Bus and Data Checking
  • Power-On Reset to Zero
  • 8-Pin μMAX Package

Applications

AI Translation
  • Digital Gain and Offset Adjustments
  • Programmable Voltage and Current Sources
  • Programmable Attenuation
  • VCO/Varactor Diode Control
  • Low-Cost Instrumentation
  • Battery-Operated Instrumentation