Name: MICROCHIP PIC24FV32KA302T-I/ML
Brand: MICROCHIP
SKU: C630366
Price: 1.471 USD
Availability: OutOfStock

Run – CPU, Flash, SRAM and Peripherals On
Doze – CPU Clock Runs Slower than Peripherals
Idle – CPU Off, Flash, SRAM and Peripherals On
Sleep – CPU, Flash and Peripherals Off, and SRAM On
Deep Sleep – CPU, Flash, SRAM and Most Peripherals Off; Multiple Autonomous Wake-up Sources
Low-Power Consumption: Run mode currents down to 8 μA, typical; Idle mode currents down to 2.2 μA, typical; Deep Sleep mode currents down to 20 nA, typical; Real-Time Clock/Calendar currents down to 700 nA, 32 kHz, 1.8V; Watchdog Timer is 500 nA, 1.8V typical
Modified Harvard Architecture
Up to 16 MIPS Operation @32 MHz
8 MHz Internal Oscillator with 4x PLL Option and Multiple Divide Options
17-Bit by 17-Bit Single-Cycle Hardware Multiplier
32-Bit by 16-Bit Hardware Divider, 16-Bit x 16-Bit Working Register Array
C Compiler Optimized Instruction Set Architecture
Hardware Real-Time Clock and Calendar (RTCC): Provides clock, calendar and alarm functions; Can run in Deep Sleep mode; Can use 50/60 Hz power line input as clock source
Programmable 32-Bit Cyclic Redundancy Check (CRC)
Multiple Serial Communication modules: Two 3/4 -wire SPI modules; Two I²C modules with multi-master/slave support; Two UART modules, supporting RS-485, RS-232, LIN/J2602
Five 16-Bit Timers/Counters with Programmable Prescaler: Can be paired as 32-bit timers/counters
Three 16-Bit Capture Inputs with Dedicated Timers
Three 16-Bit Compare/PWM Outputs with Dedicated Timers
Configurable Open-Drain Outputs on Digital I/O Pins
Up to Three External Interrupt Sources
12-Bit, Up to 16-Channel Analog-to-Digital Converter: 100 ksps conversion rate; Conversion available during Sleep and Idle; Auto-sampling, timer-based option for Sleep and Idle modes; Wake on auto-compare option
Dual Rail-to-Rail Analog Comparators with Programmable Input/Output Configuration
On-Chip Voltage Reference
Internal Temperature Sensor
Charge Time Measurement Unit (CTMU): Used for capacitance sensing, 16 channels; Time measurement, down to 200 ps resolution; Delay/pulse generation, down to 1 ns resolution
Wide Operating Voltage Range: 1.8V to 3.6V (PIC24F devices); 2.0V to 5.5V (PIC24FV devices)
Low-Power Wake-up Sources and Supervisors: Ultra Low-Power Wake-up (ULPWU) for Sleep/Deep Sleep; Low-Power Watchdog Timer (DSWDT) for Deep Sleep; Extreme Low-Power Brown-out Reset (DSBOR) for Deep Sleep, LPBOR for all other modes
System Frequency Range Declaration bits: Declaring the frequency range optimizes the current consumption.
Standard Watchdog Timer (WDT) with On-Chip, Low-Power RC Oscillator for Reliable Operation
Programmable High/Low-Voltage Detect (HLVD)
Standard Brown-out Reset (BOR) with 3 Programmable Trip Points that can be Disabled in Sleep
High-Current Sink/Source (18 mA/18 mA) on All I/O Pins
Flash Program Memory: Erase/write cycles: 10,000 minimum; 40 years’ data retention minimum
Data EEPROM: Erase/write cycles: 100,000 minimum; 40 years’ data retention minimum
Fail-Safe Clock Monitor (FSCM)
Programmable Reference Clock Output
Self-Programmable under Software Control
In-Circuit Serial Programming (ICSP) and In-Circuit Debug (ICD) via 2 Pins

Run – CPU, Flash, SRAM and Peripherals On
Doze – CPU Clock Runs Slower than Peripherals
Idle – CPU Off, Flash, SRAM and Peripherals On
Sleep – CPU, Flash and Peripherals Off, and SRAM On
Deep Sleep – CPU, Flash, SRAM and Most Peripherals Off; Multiple Autonomous Wake-up Sources
Low-Power Consumption: Run mode currents down to 8 μA, typical; Idle mode currents down to 2.2 μA, typical; Deep Sleep mode currents down to 20 nA, typical; Real-Time Clock/Calendar currents down to 700 nA, 32 kHz, 1.8V; Watchdog Timer is 500 nA, 1.8V typical
Modified Harvard Architecture
Up to 16 MIPS Operation @32 MHz
8 MHz Internal Oscillator with 4x PLL Option and Multiple Divide Options
17-Bit by 17-Bit Single-Cycle Hardware Multiplier
32-Bit by 16-Bit Hardware Divider, 16-Bit x 16-Bit Working Register Array
C Compiler Optimized Instruction Set Architecture
Hardware Real-Time Clock and Calendar (RTCC): Provides clock, calendar and alarm functions; Can run in Deep Sleep mode; Can use 50/60 Hz power line input as clock source
Programmable 32-Bit Cyclic Redundancy Check (CRC)
Multiple Serial Communication modules: Two 3/4 -wire SPI modules; Two I²C modules with multi-master/slave support; Two UART modules, supporting RS-485, RS-232, LIN/J2602
Five 16-Bit Timers/Counters with Programmable Prescaler: Can be paired as 32-bit timers/counters
Three 16-Bit Capture Inputs with Dedicated Timers
Three 16-Bit Compare/PWM Outputs with Dedicated Timers
Configurable Open-Drain Outputs on Digital I/O Pins
Up to Three External Interrupt Sources
12-Bit, Up to 16-Channel Analog-to-Digital Converter: 100 ksps conversion rate; Conversion available during Sleep and Idle; Auto-sampling, timer-based option for Sleep and Idle modes; Wake on auto-compare option
Dual Rail-to-Rail Analog Comparators with Programmable Input/Output Configuration
On-Chip Voltage Reference
Internal Temperature Sensor
Charge Time Measurement Unit (CTMU): Used for capacitance sensing, 16 channels; Time measurement, down to 200 ps resolution; Delay/pulse generation, down to 1 ns resolution
Wide Operating Voltage Range: 1.8V to 3.6V (PIC24F devices); 2.0V to 5.5V (PIC24FV devices)
Low-Power Wake-up Sources and Supervisors: Ultra Low-Power Wake-up (ULPWU) for Sleep/Deep Sleep; Low-Power Watchdog Timer (DSWDT) for Deep Sleep; Extreme Low-Power Brown-out Reset (DSBOR) for Deep Sleep, LPBOR for all other modes
System Frequency Range Declaration bits: Declaring the frequency range optimizes the current consumption.
Standard Watchdog Timer (WDT) with On-Chip, Low-Power RC Oscillator for Reliable Operation
Programmable High/Low-Voltage Detect (HLVD)
Standard Brown-out Reset (BOR) with 3 Programmable Trip Points that can be Disabled in Sleep
High-Current Sink/Source (18 mA/18 mA) on All I/O Pins
Flash Program Memory: Erase/write cycles: 10,000 minimum; 40 years’ data retention minimum
Data EEPROM: Erase/write cycles: 100,000 minimum; 40 years’ data retention minimum
Fail-Safe Clock Monitor (FSCM)
Programmable Reference Clock Output
Self-Programmable under Software Control
In-Circuit Serial Programming (ICSP) and In-Circuit Debug (ICD) via 2 Pins

Fabricante	MICROCHIP
N.º de pieza fab.	PIC24FV32KA302T-I/ML
Nº LCSC	C630366
Emb.	QFN-28-EP(6x6)
Número de Cliente
Atrib. clave	PIC 16 Bit 32MHz QFN-28-EP(6x6) Microcontrollers RoHS
Hoja de Datos	MICROCHIP PIC24FV32KA302T-I/ML
Cumplimiento RoHS	2 documentos disponibles
Piezas alternativas	1

Tipo	Descripción
Categoría	Integrated Circuits (ICs)/Embedded/Microcontrollers
Fabricante	MICROCHIP
Emb.	QFN-28-EP(6x6)
ADC (Bit)	12bit
Number of I/O	23
Operating Temperature	-40℃~+85℃
Voltage - Supply	2V~5.5V
Program Memory Type	FLASH
EEPROM	512Byte
Program Storage Size	32KB
CPU Core	PIC
Core Size	16 Bit
CPU Maximum Speed	32MHz
Oscillator Type	Built-in

Tipo	Descripción
Categoría	Integrated Circuits (ICs)/Embedded/Microcontrollers
Fabricante	MICROCHIP
Emb.	QFN-28-EP(6x6)
ADC (Bit)	12bit
Number of I/O	23
Operating Temperature	-40℃~+85℃
Voltage - Supply	2V~5.5V

Tipo	Descripción
Program Memory Type	FLASH
EEPROM	512Byte
Program Storage Size	32KB
CPU Core	PIC
Core Size	16 Bit
CPU Maximum Speed	32MHz
Oscillator Type	Built-in

Cant.	Prec. unit.(Solo como referencia)	Importo total
1+	$ 4.01	$ 4.01
200+	$ 1.5528	$ 310.56
500+	$ 1.4972	$ 748.60
1,000+	$ 1.471	$ 1471.00
Encapsulado Estándar1600/Full Reel

MICROCHIP PIC24FV32KA302T-I/ML

Especificaciones del Producto

Características

Especificaciones del Producto

Características

C630366 Biblioteca EasyEDA

Cumplimiento & Códigos de Exportación

Piezas alternativas

Tipo	Detalles
RoHS	ROHS3 Compliant
ECCN	3A991A2
CNHTS	8542319090
USHTS
TARIC
CAHTS
BRHTS
INHTS
MXHTS