Images for reference only
EDA ModelsEasyEDA
MICROCHIP PIC18LF13K50T-I/SO
| Manufacturer | |
| MPN | PIC18LF13K50T-I/SO |
| LCSC Part # | C630141 |
| Packaging | SOIC-20-300mil |
| Customer # | |
| Key Attributes | PIC 8 Bit 48MHz SOIC-20-300mil Microcontrollers |
| Datasheet | MICROCHIP PIC18LF13K50T-I/SO |
| Alternative Parts | 10 |
Products Specifications
All
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Manufacturer | MICROCHIP | |
| Packaging | SOIC-20-300mil | |
| Number of I/O | 14 | |
| Operating Temperature | -40℃~+85℃ | |
| Program Memory Type | FLASH | |
| Voltage - Supply | 1.8V~3.6V | |
| EEPROM | 256Byte | |
| Program Storage Size | 8KB | |
| CPU Core | PIC | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 48MHz | |
| Oscillator Type | Built-in |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Manufacturer | MICROCHIP | |
| Packaging | SOIC-20-300mil | |
| Number of I/O | 14 | |
| Operating Temperature | -40℃~+85℃ | |
| Program Memory Type | FLASH | |
| Voltage - Supply | 1.8V~3.6V |
| Type | Description | |
|---|---|---|
| EEPROM | 256Byte | |
| Program Storage Size | 8KB | |
| CPU Core | PIC | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 48MHz | |
| Oscillator Type | Built-in |
Help & FeedbackShow similar products (0) >
Features
AI Translation
- USB V2.0 Compliant SIE
- Full Speed (12 Mb/s) and Low Speed (1.5 Mb/s)
- Supports Control, Interrupt, Isochronous and Bulk Transfers
- Supports up to 16 Endpoints (8 bidirectional)
- 256-byte Dual Access RAM for USB
- Input-Change Interrupt on D+/D- for Detecting Physical Connection to USB Host
- C Compiler Optimized Architecture:
- Optional extended instruction set designed to optimize re-entrant code
- 256 bytes, data EEPROM
- Up to 16 Kbytes linear program memory addressing
- Up to 768 bytes linear data memory addressing
- Priority Levels for Interrupts
- 8x8 Single-Cycle Hardware Multiplier
- CPU Divider to Run the Core Slower than the USB Peripheral
- 16 MHz Internal Oscillator Block:
- Software selectable frequencies, 31 kHz to 16 MHz
- Provides a complete range of clock speeds from 31 kHz to 32 MHz when used with PLL
- User tunable to compensate for frequency drift
- Four Crystal modes, up to 48 MHz
- External Clock modes, up to 48 MHz
- 4X Phase Lock Loop (PLL)
- Secondary Oscillator using Timer1 at 32 kHz
- Fail-Safe Clock Monitor:
- Allows for safe shutdown if primary or secondary oscillator stops
- Two-Speed Oscillator Start-Up
- Full 5.5V Operation – PIC18F1XK50
- 1.8V-3.6V Operation – PIC18LF1XK50
- Self-Programmable under Software Control
- Programmable Brown-out Reset (BOR):
- With software enable option
- Extended Watchdog Timer (WDT):
- Programmable period from 4ms to 131s
- Single-Supply 3V In-Circuit Serial Programming via Two Pins
- Sleep mode: 24 nA
- Watchdog Timer: 450 nA
- Timer1 Oscillator: 790 nA @ 32 kHz
- Analog-to-Digital Converter (ADC) module:
- 10-bit resolution, nine external channels
- Auto acquisition capability
- Conversion available during Sleep
- Internal 1.024V Fixed Voltage Reference (FVR) channel
- Independent input multiplexing
- Dual Analog Comparators:
- Rail-to-rail operation
- Independent input multiplexing
- Voltage Reference module:
- Programmable (% of VDD), 16 steps
- Two 16-level voltage ranges using VREF pins
- Programmable Fixed Voltage Reference (FVR), 3 levels
- On-Chip 3.2V LDO Regulator – PIC18F1XK50
- 14 I/O Pins plus 1 Input-Only Pin:
- High-current sink/source 25 mA/25 mA
- Seven programmable weak pull-ups
- Seven programmable interrupt-on-change pins
- Three programmable external interrupts
- Programmable slew rate
- Enhanced Capture/Compare/PWM (ECCP) module:
- One, two, three, or four PWM outputs
- Selectable polarity
- Programmable dead time
- Auto-shutdown and Auto-restart
- Master Synchronous Serial Port (MSSP) module:
- 3-wire SPI (supports all four modes)
- I²C Master and Slave modes (Slave mode address masking)
- Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) module:
- Supports RS-485, RS-232 and LIN 2.0
- RS-232 operation using internal oscillator
- Auto-Baud Detect
- Auto-Wake-up on Break
- SR Latch mode
Out of Stock
Notify Me
Minimum: 1Multiple: 1Sales Unit: Piece
Add to BOM List
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 1.5965 | $ 1.60 |
| 10+ | $ 1.3204 | $ 13.20 |
| 30+ | $ 1.1677 | $ 35.03 |
| 100+ | $ 0.9965 | $ 99.65 |
| 500+ | $ 0.9193 | $ 459.65 |
| 1,000+ | $ 0.8854 | $ 885.40 |
Standard Packaging1600/Full Reel | ||
Better price for more quantity?
$
Products Specifications
All
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Manufacturer | MICROCHIP | |
| Packaging | SOIC-20-300mil | |
| Number of I/O | 14 | |
| Operating Temperature | -40℃~+85℃ | |
| Program Memory Type | FLASH | |
| Voltage - Supply | 1.8V~3.6V | |
| EEPROM | 256Byte | |
| Program Storage Size | 8KB | |
| CPU Core | PIC | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 48MHz | |
| Oscillator Type | Built-in |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Manufacturer | MICROCHIP | |
| Packaging | SOIC-20-300mil | |
| Number of I/O | 14 | |
| Operating Temperature | -40℃~+85℃ | |
| Program Memory Type | FLASH | |
| Voltage - Supply | 1.8V~3.6V |
| Type | Description | |
|---|---|---|
| EEPROM | 256Byte | |
| Program Storage Size | 8KB | |
| CPU Core | PIC | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 48MHz | |
| Oscillator Type | Built-in |
Help & FeedbackShow similar products (0) >
Features
AI Translation
- USB V2.0 Compliant SIE
- Full Speed (12 Mb/s) and Low Speed (1.5 Mb/s)
- Supports Control, Interrupt, Isochronous and Bulk Transfers
- Supports up to 16 Endpoints (8 bidirectional)
- 256-byte Dual Access RAM for USB
- Input-Change Interrupt on D+/D- for Detecting Physical Connection to USB Host
- C Compiler Optimized Architecture:
- Optional extended instruction set designed to optimize re-entrant code
- 256 bytes, data EEPROM
- Up to 16 Kbytes linear program memory addressing
- Up to 768 bytes linear data memory addressing
- Priority Levels for Interrupts
- 8x8 Single-Cycle Hardware Multiplier
- CPU Divider to Run the Core Slower than the USB Peripheral
- 16 MHz Internal Oscillator Block:
- Software selectable frequencies, 31 kHz to 16 MHz
- Provides a complete range of clock speeds from 31 kHz to 32 MHz when used with PLL
- User tunable to compensate for frequency drift
- Four Crystal modes, up to 48 MHz
- External Clock modes, up to 48 MHz
- 4X Phase Lock Loop (PLL)
- Secondary Oscillator using Timer1 at 32 kHz
- Fail-Safe Clock Monitor:
- Allows for safe shutdown if primary or secondary oscillator stops
- Two-Speed Oscillator Start-Up
- Full 5.5V Operation – PIC18F1XK50
- 1.8V-3.6V Operation – PIC18LF1XK50
- Self-Programmable under Software Control
- Programmable Brown-out Reset (BOR):
- With software enable option
- Extended Watchdog Timer (WDT):
- Programmable period from 4ms to 131s
- Single-Supply 3V In-Circuit Serial Programming via Two Pins
- Sleep mode: 24 nA
- Watchdog Timer: 450 nA
- Timer1 Oscillator: 790 nA @ 32 kHz
- Analog-to-Digital Converter (ADC) module:
- 10-bit resolution, nine external channels
- Auto acquisition capability
- Conversion available during Sleep
- Internal 1.024V Fixed Voltage Reference (FVR) channel
- Independent input multiplexing
- Dual Analog Comparators:
- Rail-to-rail operation
- Independent input multiplexing
- Voltage Reference module:
- Programmable (% of VDD), 16 steps
- Two 16-level voltage ranges using VREF pins
- Programmable Fixed Voltage Reference (FVR), 3 levels
- On-Chip 3.2V LDO Regulator – PIC18F1XK50
- 14 I/O Pins plus 1 Input-Only Pin:
- High-current sink/source 25 mA/25 mA
- Seven programmable weak pull-ups
- Seven programmable interrupt-on-change pins
- Three programmable external interrupts
- Programmable slew rate
- Enhanced Capture/Compare/PWM (ECCP) module:
- One, two, three, or four PWM outputs
- Selectable polarity
- Programmable dead time
- Auto-shutdown and Auto-restart
- Master Synchronous Serial Port (MSSP) module:
- 3-wire SPI (supports all four modes)
- I²C Master and Slave modes (Slave mode address masking)
- Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) module:
- Supports RS-485, RS-232 and LIN 2.0
- RS-232 operation using internal oscillator
- Auto-Baud Detect
- Auto-Wake-up on Break
- SR Latch mode
C630141 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
Alternative Parts
| MPN | Manufacturer | Packaging | Availability | Unit Price | ||
|---|---|---|---|---|---|---|
| PIC18F13K50-I/SO | MICROCHIP | SOIC-20-300mil | 10 | $ 4.5392 | ||
| PIC18F14K50-I/SO | MICROCHIP | SOIC-20-300mil | 23 | $ 5.254 | ||
| PIC18LF13K50-I/SO | MICROCHIP | SOIC-20-300mil | 0 | $ 0.4631 | ||
| PIC18LF14K50-I/SO | MICROCHIP | SOIC-20-300mil | 0 | $ 2.9033 | ||
| PIC18F13K50T-I/SO | MICROCHIP | SOIC-20-300mil | 0 | $ 2.1995 | ||
| PIC16LF1459T-I/SO | MICROCHIP | SOIC-20-300mil | 0 | $ 1.2596 | ||
| PIC16LF1459-I/SO | MICROCHIP | SOIC-20-300mil | 0 | $ 2.1995 | ||
| PIC16LF1459-E/SO | MICROCHIP | SOIC-20-300mil | 0 | $ 1.9386 | ||
| PIC18F14K50T-I/SO | MICROCHIP | SOIC-20-300mil | 0 | $ 5.1779 | ||
| PIC16F1459-I/SO | MICROCHIP | SOIC-20-300mil | 0 | $ 3.503 |