- Pinout
- Footprint
Images for reference only
EDA ModelsEasyEDA
MICROCHIP USB3318-CP-TR
| Manufacturer | |
| MPN | USB3318-CP-TR |
| LCSC Part # | C622618 |
| Packaging | QFN-24-EP(4x4) |
| Customer # | |
| Key Attributes | Hi-Speed USB Transceiver with 1.8V-3.3V ULPI Interface - 13MHz Reference Clock |
| Datasheet | MICROCHIP USB3318-CP-TR |
| RoHS Compliance | 2 documents available |
| Alternative Parts | 5 |
Products Specifications
All
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MICROCHIP | |
| Packaging | QFN-24-EP(4x4) | |
| Type | Transceiver | |
| Voltage - Supply | 1.8V~3.3V | |
| number of channels | - | |
| Data Rate | 480Mbps | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Low-power mode;Power-on reset;Built-in clock generator | |
| Supply Current | 5.5mA | |
| Quiescent Supply Current | 20uA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MICROCHIP | |
| Packaging | QFN-24-EP(4x4) | |
| Type | Transceiver | |
| Voltage - Supply | 1.8V~3.3V | |
| number of channels | - |
| Type | Description | |
|---|---|---|
| Data Rate | 480Mbps | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Low-power mode;Power-on reset;Built-in clock generator | |
| Supply Current | 5.5mA | |
| Quiescent Supply Current | 20uA |
Help & FeedbackShow similar products (0) >
Features
AI Translation
- USB-IF “Hi-Speed” compliant to the Universal Serial Bus Specification Rev 2.0
- Interface compliant with the ULPI Specification revision 1.1 as a Single Data Rate (SDR) PHY
- 1.8V to 3.3V IO Voltage (±10%)
- flexPWR® Technology Low current design ideal for battery powered applications
- “Sleep” mode tri-states all ULPI pins and places the part in a low current state
- Supports FS pre-amble for FS hubs with a LS device attached (UTMI+ Level 3)
- Supports HS SOF and LS keep-alive pulse
- Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go Supplement Revision 2.0 specification
- Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
- Allows host to turn VBUS off to conserve battery power in OTG applications
- Support OTG monitoring of VBUS levels with internal comparators
- “Wrapper-less” design for optimal timing performance and design ease
- Low Latency Hi-Speed Receiver (43 Hi-Speed clocks Max) allows use of legacy UTMI Links with a ULPI bridge
- Internal 5V cable short-circuit protection of ID, DP and DM lines to VBUS or ground
- 13MHz Reference Clock Operation — 0 to 3.6V input drive tolerant — Able to accept “noisy” clock sources
- Internal low jitter PLL for 480MHz Hi-Speed USB operation
- Internal detection of the value of resistance to ground on the ID pin
- Integrated battery to 3.3V LDO regulator — 2.2uF bypass capacitor 100mV dropout voltage
- Integrated ESD protection circuits — Up to ±15kV without any external devices
- Carkit UART mode for non-USB serial data transfers
- Industrial Operating Temperature -40°C to +85°C
- Packaging Options 24 pin QFN lead-free RoHS compliant package (4×4×0.90 mm height)
Applications
AI Translation
- The USB3318 is targeted for any application where a HiSpeed USB connection is desired and when board space, power, and interface pins must be minimized.
- Cell Phones
- PDAs
- MP3 Players
- GPS Personal Navigation
- Scanners
- External Hard Drives
- Digital Still and Video Cameras
- Portable Media Players
- Entertainment Devices
- Printers
- Set Top Boxes
- Video Record/Playback Systems
- IP and Video Phones
- Gaming Consoles
- POS Terminals
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement
Products Specifications
All
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MICROCHIP | |
| Packaging | QFN-24-EP(4x4) | |
| Type | Transceiver | |
| Voltage - Supply | 1.8V~3.3V | |
| number of channels | - | |
| Data Rate | 480Mbps | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Low-power mode;Power-on reset;Built-in clock generator | |
| Supply Current | 5.5mA | |
| Quiescent Supply Current | 20uA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MICROCHIP | |
| Packaging | QFN-24-EP(4x4) | |
| Type | Transceiver | |
| Voltage - Supply | 1.8V~3.3V | |
| number of channels | - |
| Type | Description | |
|---|---|---|
| Data Rate | 480Mbps | |
| Operating Temperature | -40℃~+85℃ | |
| Features | Low-power mode;Power-on reset;Built-in clock generator | |
| Supply Current | 5.5mA | |
| Quiescent Supply Current | 20uA |
Help & FeedbackShow similar products (0) >
Features
AI Translation
- USB-IF “Hi-Speed” compliant to the Universal Serial Bus Specification Rev 2.0
- Interface compliant with the ULPI Specification revision 1.1 as a Single Data Rate (SDR) PHY
- 1.8V to 3.3V IO Voltage (±10%)
- flexPWR® Technology Low current design ideal for battery powered applications
- “Sleep” mode tri-states all ULPI pins and places the part in a low current state
- Supports FS pre-amble for FS hubs with a LS device attached (UTMI+ Level 3)
- Supports HS SOF and LS keep-alive pulse
- Includes full support for the optional On-The-Go (OTG) protocol detailed in the On-The-Go Supplement Revision 2.0 specification
- Supports the OTG Host Negotiation Protocol (HNP) and Session Request Protocol (SRP)
- Allows host to turn VBUS off to conserve battery power in OTG applications
- Support OTG monitoring of VBUS levels with internal comparators
- “Wrapper-less” design for optimal timing performance and design ease
- Low Latency Hi-Speed Receiver (43 Hi-Speed clocks Max) allows use of legacy UTMI Links with a ULPI bridge
- Internal 5V cable short-circuit protection of ID, DP and DM lines to VBUS or ground
- 13MHz Reference Clock Operation — 0 to 3.6V input drive tolerant — Able to accept “noisy” clock sources
- Internal low jitter PLL for 480MHz Hi-Speed USB operation
- Internal detection of the value of resistance to ground on the ID pin
- Integrated battery to 3.3V LDO regulator — 2.2uF bypass capacitor 100mV dropout voltage
- Integrated ESD protection circuits — Up to ±15kV without any external devices
- Carkit UART mode for non-USB serial data transfers
- Industrial Operating Temperature -40°C to +85°C
- Packaging Options 24 pin QFN lead-free RoHS compliant package (4×4×0.90 mm height)
Applications
AI Translation
- The USB3318 is targeted for any application where a HiSpeed USB connection is desired and when board space, power, and interface pins must be minimized.
- Cell Phones
- PDAs
- MP3 Players
- GPS Personal Navigation
- Scanners
- External Hard Drives
- Digital Still and Video Cameras
- Portable Media Players
- Entertainment Devices
- Printers
- Set Top Boxes
- Video Record/Playback Systems
- IP and Video Phones
- Gaming Consoles
- POS Terminals
C622618 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |