COSEMITECH CHA931TB
| Manufacturer | COSEMITECHAsian Brands |
| MPN | CHA931TB |
| LCSC Part # | C2879990 |
| Packaging | TO-92S |
| Customer # | |
| Key Attributes | Digital Omnipolar-Switch Hall Sensor |
| Datasheet | COSEMITECH CHA931TB |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Magnetic Sensors/Switches (Solid State) | |
| Manufacturer | COSEMITECH | |
| Packaging | TO-92S | |
| BHYS | - | |
| Sample Frequency | 30kHz | |
| Operation Points | 3mT | |
| Supply Current | 1.6mA | |
| Type | Omnipolar | |
| Release Points | 2mT | |
| Operating Temperature | -40℃~+150℃ | |
| Output Current | 25mA | |
| Voltage - Supply | 2.5V~22V | |
| Features | Built-in LDO;Built-in Schmitt trigger;Short-Circuit Protection;Reverse voltage protection;Current limit protection |
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Magnetic Sensors/Switches (Solid State) | |
| Manufacturer | COSEMITECH | |
| Packaging | TO-92S | |
| BHYS | - | |
| Sample Frequency | 30kHz | |
| Operation Points | 3mT | |
| Supply Current | 1.6mA |
| Type | Description | |
|---|---|---|
| Type | Omnipolar | |
| Release Points | 2mT | |
| Operating Temperature | -40℃~+150℃ | |
| Output Current | 25mA | |
| Voltage - Supply | 2.5V~22V | |
| Features | Built-in LDO;Built-in Schmitt trigger;Short-Circuit Protection;Reverse voltage protection;Current limit protection |
Introduction
CHA93X/CHI93X Hall- effect sensor is extremely temperature- stable and stress- resistant sensor ICs, especially suited for operation over extended temperature ranges from - 40℃ to 150℃. Superior high temperature performance is possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over- molding, temperature dependencies, and thermal stress. The device includes a voltage regulator, Hall- voltage generator, small- signal amplifier, chopper stabilization, Schmitt trigger, and a short circuit protected open- drain output to sink up to 25 mA. An on- board regulator permits operation with supply voltages of 2.5 to 22 V. The advantage of operating down to 2.5 V is that the device can used in 2.5 V applications or with additional external resistance in series with the supply pin for greater protection against high- voltage transient events. The CHA93X/CHI93X series is digital Omnipolar Hall switch. When the applied magnetic flux density exceeds the BOP threshold, the chip open- drain output goes low. The output stays low until the field decreases to less than BRP, and then the output goes to high impedance. The CHA93X/CHI93X also integrated internal clamps against supply/output transients; output short circuits protection; reverse battery conditions. Three package styles provide a magnetically optimized package for most applications, SOT- 23, TO- 92S and SOT- 89. Each package type is lead (Pb) free (suffix, - T), with a 100% matte- tin- plated lead- frame.
Features
- AEC-Q100 automotive qualified for CHA93X
- Digital Omnipolar-Switch Hall Sensor
- Superior Temperature Stability
- Multiple Sensitivity Options (BOP / BRP): ± 25 / ± 15 Gauss; ± 70 / ± 35 Gauss; ± 100 / ± 50 Gauss
- On board voltage regulator for 2.5V to 22V range
- Open Drain Output (25 mA Sink)
- Resistant to physical stress
- Output short-circuit protection
- Operation from unregulated supply
- Reverse-battery and freewheeling protection
- Solid-state reliability
- Wide Operating temperature range: -40 to 150°C
- Small package sizes TO-92S, SOT-23 and SOT-89
- RoHS-compliant material meets directive 2011/65/EU
Applications
- Docking Detection
- Door Open and Close Detection
- Proximity Sensing
- Valve Positioning
- Pulse Counting
- Flow rate sensing
- Robotic control (cylinder position monitoring)
- Float-based fluid level sensing
- Speed and RPM sensing in fitness equipment
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Magnetic Sensors/Switches (Solid State) | |
| Manufacturer | COSEMITECH | |
| Packaging | TO-92S | |
| BHYS | - | |
| Sample Frequency | 30kHz | |
| Operation Points | 3mT | |
| Supply Current | 1.6mA | |
| Type | Omnipolar | |
| Release Points | 2mT | |
| Operating Temperature | -40℃~+150℃ | |
| Output Current | 25mA | |
| Voltage - Supply | 2.5V~22V | |
| Features | Built-in LDO;Built-in Schmitt trigger;Short-Circuit Protection;Reverse voltage protection;Current limit protection |
| Type | Description | |
|---|---|---|
| Category | Sensors, Transducers/Magnetic Sensors/Switches (Solid State) | |
| Manufacturer | COSEMITECH | |
| Packaging | TO-92S | |
| BHYS | - | |
| Sample Frequency | 30kHz | |
| Operation Points | 3mT | |
| Supply Current | 1.6mA |
| Type | Description | |
|---|---|---|
| Type | Omnipolar | |
| Release Points | 2mT | |
| Operating Temperature | -40℃~+150℃ | |
| Output Current | 25mA | |
| Voltage - Supply | 2.5V~22V | |
| Features | Built-in LDO;Built-in Schmitt trigger;Short-Circuit Protection;Reverse voltage protection;Current limit protection |
Introduction
CHA93X/CHI93X Hall- effect sensor is extremely temperature- stable and stress- resistant sensor ICs, especially suited for operation over extended temperature ranges from - 40℃ to 150℃. Superior high temperature performance is possible through dynamic offset cancellation, which reduces the residual offset voltage normally caused by device over- molding, temperature dependencies, and thermal stress. The device includes a voltage regulator, Hall- voltage generator, small- signal amplifier, chopper stabilization, Schmitt trigger, and a short circuit protected open- drain output to sink up to 25 mA. An on- board regulator permits operation with supply voltages of 2.5 to 22 V. The advantage of operating down to 2.5 V is that the device can used in 2.5 V applications or with additional external resistance in series with the supply pin for greater protection against high- voltage transient events. The CHA93X/CHI93X series is digital Omnipolar Hall switch. When the applied magnetic flux density exceeds the BOP threshold, the chip open- drain output goes low. The output stays low until the field decreases to less than BRP, and then the output goes to high impedance. The CHA93X/CHI93X also integrated internal clamps against supply/output transients; output short circuits protection; reverse battery conditions. Three package styles provide a magnetically optimized package for most applications, SOT- 23, TO- 92S and SOT- 89. Each package type is lead (Pb) free (suffix, - T), with a 100% matte- tin- plated lead- frame.
Features
- AEC-Q100 automotive qualified for CHA93X
- Digital Omnipolar-Switch Hall Sensor
- Superior Temperature Stability
- Multiple Sensitivity Options (BOP / BRP): ± 25 / ± 15 Gauss; ± 70 / ± 35 Gauss; ± 100 / ± 50 Gauss
- On board voltage regulator for 2.5V to 22V range
- Open Drain Output (25 mA Sink)
- Resistant to physical stress
- Output short-circuit protection
- Operation from unregulated supply
- Reverse-battery and freewheeling protection
- Solid-state reliability
- Wide Operating temperature range: -40 to 150°C
- Small package sizes TO-92S, SOT-23 and SOT-89
- RoHS-compliant material meets directive 2011/65/EU
Applications
- Docking Detection
- Door Open and Close Detection
- Proximity Sensing
- Valve Positioning
- Pulse Counting
- Flow rate sensing
- Robotic control (cylinder position monitoring)
- Float-based fluid level sensing
- Speed and RPM sensing in fitness equipment
C2879990 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| ECCN | |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| ECCN | |
| CNHTS | |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |



