TI TXS0104ENMNR
| Manufacturer | |
| MPN | TXS0104ENMNR |
| LCSC Part # | C2860864 |
| Packaging | NFBGA-12 |
| Customer # | |
| Key Attributes | 4-bit bidirectional multi-voltage level shifter suitable for open-drain and push-pull applications |
| Datasheet | TI TXS0104ENMNR |
| RoHS Compliance | 1 documents available |
| Alternative Parts | 4 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Translators, Level Shifters | |
| Manufacturer | TI | |
| Packaging | NFBGA-12 | |
| output type | Open-drain;Push-Pull | |
| Interface | - | |
| Output Signal | - | |
| Input Signal | - | |
| Operating Temperature | -40℃~+85℃ | |
| Data Rate | 24Mbps | |
| Number of Elements | 1 | |
| Channel Type | Bidirectional | |
| Features | Automatic direction detection;Output enable high-impedance;Integrated pull-up resistor | |
| Voltage - Supply | 2.3V~5.5V;1.65V~3.6V | |
| Number of Circuits | 4 | |
| Current - Output High(IOH) | - | |
| Current - Output Low(IOL) | - |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Translators, Level Shifters | |
| Manufacturer | TI | |
| Packaging | NFBGA-12 | |
| output type | Open-drain;Push-Pull | |
| Interface | - | |
| Output Signal | - | |
| Input Signal | - | |
| Operating Temperature | -40℃~+85℃ |
| Type | Description | |
|---|---|---|
| Data Rate | 24Mbps | |
| Number of Elements | 1 | |
| Channel Type | Bidirectional | |
| Features | Automatic direction detection;Output enable high-impedance;Integrated pull-up resistor | |
| Voltage - Supply | 2.3V~5.5V;1.65V~3.6V | |
| Number of Circuits | 4 | |
| Current - Output High(IOH) | - | |
| Current - Output Low(IOL) | - |
Introduction
This 4-bit in-phase converter uses two independent configurable power supply rails. Port A is designed to track VCCA. VCCA supports any power supply voltage in the range from 1.65V to 3.6V. VCCA must be lower than or equal to VCCB. Port B is designed to track VCCB. VCCB supports any power supply voltage in the range from 2.3V to 5.5V. This enables the device to perform low-voltage bidirectional conversion arbitrarily between 1.8V, 2.5V, 3.3V, and 5V voltage nodes.
Features
- No direction control signal required
- Maximum data rate:
- 24Mbps (push-pull)
- 2Mbps (open-drain)
- NanoFree package
- Port A supports 1.65V to 3.6V, Port B supports 2.3V to 5.5V (VCCA ≤ VCCB)
- No power sequencing required; either VCCA or VCCB can ramp up first
- Latch-up performance exceeds 100mA per JESD 78 Class II
- ESD protection exceeds JESD 22:
- Port A:
- 2000V Human Body Model (A114-B)
- 200V Machine Model (A115-A)
- 1000V Charged Device Model (C101)
- Port B:
- 15kV Human Body Model (A114-B)
- 200V Machine Model (A115-A)
- 1000V Charged Device Model (C101)
- Port A:
- IEC 61000-4-2 ESD (Port B):
- ±8kV contact discharge
- ±10kV air-gap discharge
Applications
- Handheld terminals
- Smartphones
- Tablets
- Desktop computers
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Translators, Level Shifters | |
| Manufacturer | TI | |
| Packaging | NFBGA-12 | |
| output type | Open-drain;Push-Pull | |
| Interface | - | |
| Output Signal | - | |
| Input Signal | - | |
| Operating Temperature | -40℃~+85℃ | |
| Data Rate | 24Mbps | |
| Number of Elements | 1 | |
| Channel Type | Bidirectional | |
| Features | Automatic direction detection;Output enable high-impedance;Integrated pull-up resistor | |
| Voltage - Supply | 2.3V~5.5V;1.65V~3.6V | |
| Number of Circuits | 4 | |
| Current - Output High(IOH) | - | |
| Current - Output Low(IOL) | - |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Logic/Translators, Level Shifters | |
| Manufacturer | TI | |
| Packaging | NFBGA-12 | |
| output type | Open-drain;Push-Pull | |
| Interface | - | |
| Output Signal | - | |
| Input Signal | - | |
| Operating Temperature | -40℃~+85℃ |
| Type | Description | |
|---|---|---|
| Data Rate | 24Mbps | |
| Number of Elements | 1 | |
| Channel Type | Bidirectional | |
| Features | Automatic direction detection;Output enable high-impedance;Integrated pull-up resistor | |
| Voltage - Supply | 2.3V~5.5V;1.65V~3.6V | |
| Number of Circuits | 4 | |
| Current - Output High(IOH) | - | |
| Current - Output Low(IOL) | - |
Introduction
This 4-bit in-phase converter uses two independent configurable power supply rails. Port A is designed to track VCCA. VCCA supports any power supply voltage in the range from 1.65V to 3.6V. VCCA must be lower than or equal to VCCB. Port B is designed to track VCCB. VCCB supports any power supply voltage in the range from 2.3V to 5.5V. This enables the device to perform low-voltage bidirectional conversion arbitrarily between 1.8V, 2.5V, 3.3V, and 5V voltage nodes.
Features
- No direction control signal required
- Maximum data rate:
- 24Mbps (push-pull)
- 2Mbps (open-drain)
- NanoFree package
- Port A supports 1.65V to 3.6V, Port B supports 2.3V to 5.5V (VCCA ≤ VCCB)
- No power sequencing required; either VCCA or VCCB can ramp up first
- Latch-up performance exceeds 100mA per JESD 78 Class II
- ESD protection exceeds JESD 22:
- Port A:
- 2000V Human Body Model (A114-B)
- 200V Machine Model (A115-A)
- 1000V Charged Device Model (C101)
- Port B:
- 15kV Human Body Model (A114-B)
- 200V Machine Model (A115-A)
- 1000V Charged Device Model (C101)
- Port A:
- IEC 61000-4-2 ESD (Port B):
- ±8kV contact discharge
- ±10kV air-gap discharge
Applications
- Handheld terminals
- Smartphones
- Tablets
- Desktop computers
C2860864 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |



