LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

ST M95P08-IXMNT/E

Manufacturer
MPN
M95P08-IXMNT/E
LCSC Part #
C22396240
Packaging
SO-8N-150mil
Customer #
Key Attributes
Ultra low-power 8-Mbit serial SPI page EEPROM with dual and quad outputs
DatasheetST M95P08-IXMNT/E
RoHS Compliance2 documents available
Alternative Parts1
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Memory/Memory
ManufacturerST
PackagingSO-8N-150mil
Operating Temperature-40℃~+85℃
FeaturesHardware write protection function;Built-in power-on reset (POR);Built-in error correction code (ECC) function;Built-in write enable latch (WEL);Page write protection function;Software write protection function;Noise suppression function
Memory Size8Mbit
Voltage - Supply1.6V~3.6V;-
Clock Frequency80MHz
Access Time-
Data Retention - TDR (Year)100 years
Write Cycle Time(tWC)2ms
Standby Supply Current16uA
InterfaceSPI
Write Cycle Endurance500,000 Cycles

Introduction

AI Translation

The M95P08-I and M95P08-E are manufactured with ST's advanced proprietary NVM technology. They offer byte flexibility, page alterability, high page cycling performance, and ultra‑low power consumption, equivalent to that of EEPROM technology. The M95P08-I and M95P08-E are an 8-Mbit SPI page EEPROM device organized as 2048 programmable pages of 512 bytes each, accessed through an SPI bus with high-performance dual- and quad SPI outputs. The devices offer two additional (identification) 512-byte pages: The first contains identification data and, upon request, the UID. The second can be used to store sensitive application parameters, which can (later) be permanently locked in read-only mode. Additional status, configuration, and volatile registers set the desired device configuration, while the safety register provides information on the device status. The M95P08-I operates with a supply voltage from 1.6 to 3.6 V over an ambient temperature range of -40 ℃ to +85 ℃. The M95P08-E offers an extended temperature range from -40 ℃ to +105 ℃. The device supports a clock frequency of up to 80 MHz. The M95P08-I and M95P08-E offer byte and page write instructions of up to 512 bytes. Write instructions consist in self-timed auto erase and program operations, resulting in flexible data byte management. The devices also accept page/block/sector/chip erase commands to set the memory to an erased state. The memory can then be fast-programmed by 512-byte pages, and further optimized using the Page program buffer load instruction to hide the SPI communication latency.

Features

AI Translation
  • Supports serial peripheral interface (SPI) and dual/quad outputs
  • Clock frequency up to 80 MHz
  • Fast read single/dual/quad output with one dummy byte
  • Dual output data transfer up to 160 Mbits/s
  • Quad output data transfer up to 320 Mbits/s
  • 8 Mbits of page EEPROM
  • 64-Kbyte blocks, 4-Kbyte sectors
  • Page size: 512-byte
  • Two additional 512-byte identification pages
  • Wide voltage range: VCC from 1.6 to 3.6 V
  • Operating temperature range: -40 °C to +85 °C (industrial), -40 °C to +105 °C (extended)
  • Write endurance: 500 kcycles on full temperature range
  • Data retention 100 years, 10 years after 500 kcycles
  • 0.6 μA (typ) in Deep power-down mode
  • 16 μA (typ) in Standby mode
  • 800 μA (typ) for read single at 10 MHz
  • 1.5 mA (typ) for page write
  • Current peak control <3 mA
  • Fast write / program / erase times: 2 ms (typ) for Byte and Page write (includes auto erase and program) for 512 bytes
  • 1.2 ms (typ) for Page program (512 bytes)
  • 1.1 ms (typ) for Page erase
  • 1.3 ms (typ) for sector erase
  • 4 ms (typ) for block erase
  • 4 ms (typ) for chip erase
  • Page program with buffer load
  • ECC for high memory reliability (DEC, TED)
  • Schmitt trigger inputs for noise filtering
  • Output buffer programmable strength
  • Operating status flags for ISO26262
  • Software reset
  • Write protection by block, with top/bottom option
  • Unique ID upon request
  • Electronic identification
  • Supports SFDP (serial flash discoverable parameters) mode
  • JEDEC standard manufacturer identification
  • ECOPACK2 (RoHS compliant) and halogen-free packages: DFN8 2 x 3 mm, SO8N, WLCSP8
  • Enhanced ESD HBM (human body model)