TI SN65LVDS22D
| Manufacturer | |
| MPN | SN65LVDS22D |
| LCSC Part # | C1522680 |
| Packaging | SOIC-16 |
| Customer # | |
| Key Attributes | DUAL MULTIPLEXED LVDS REPEATERS |
| Datasheet | TI SN65LVDS22D |
| RoHS Compliance | 1 documents available |
| Alternative Parts | 1 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Signal Buffers, Repeaters, Splitters | |
| Manufacturer | TI | |
| Packaging | SOIC-16 | |
| Type | Buffer;Multiplexer | |
| Voltage - Supply | 3V~3.6V | |
| Number of Drivers | - | |
| Features | Fail-safe | |
| Operating Temperature | -40℃~+85℃ | |
| Level Standard | LVDS | |
| Number of Receivers | - | |
| Data Rate | 250Mbps |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Signal Buffers, Repeaters, Splitters | |
| Manufacturer | TI | |
| Packaging | SOIC-16 | |
| Type | Buffer;Multiplexer | |
| Voltage - Supply | 3V~3.6V | |
| Number of Drivers | - |
| Type | Description | |
|---|---|---|
| Features | Fail-safe | |
| Operating Temperature | -40℃~+85℃ | |
| Level Standard | LVDS | |
| Number of Receivers | - | |
| Data Rate | 250Mbps |
Introduction
The SN65LVDS22 and SN65LVDM22 are differential line drivers and receivers using LVDS technology, capable of signal transmission rates up to 400 Mbps. Multiplexer control signals S0 and S1 allow the receiver output to be switched to either or both drivers, enabling splitter or signal routing functions with a single device for added flexibility. The electrical interface complies with TIA/EIA-644 and provides a minimum differential output voltage swing of 247 mV into a 100Ω load, and can receive 100 mV signals with up to 1 V ground potential difference between transmitter and receiver. The SN65LVDM22 doubles the output drive current to achieve LVDS levels into a 50Ω load. These devices and their signaling technology are suited for point-to-point baseband (single-end terminated) and multipoint (double-end terminated) data transmission over controlled-impedance media, including PCB traces, backplanes, or cables. The ultimate data transmission rate and distance depend on the attenuation characteristics of the medium, noise coupling from the environment, and other application-specific factors. The SN65LVDS22 and SN65LVDM22 operate over a temperature range of -40℃ to 85℃. These devices incorporate limited ESD protection; during storage or handling, pins should be shorted together or the devices placed in conductive foam to prevent electrostatic damage to MOS gates.
Features
- Meets or exceeds ANSI TIA/EIA-644-1995 standard requirements
- Designed for clock rates up to 200 MHz (400 Mbps)
- Designed for data rates up to 250 Mbps
- Bus pin ESD protection exceeding 12 kV
- Single 3.3 V supply operation
- Low-voltage differential signaling: SN65LVDS22 output voltage 350 mV into 100Ω load; SN65LVDM22 output voltage 350 mV into 50Ω load
- Typical propagation delay of 4 ns
- 150 mW power consumption at 400 Mbps
- Bus pins high-impedance when disabled or VCC below 1.5 V
- LVTTL levels, 5 V tolerant
- Open-circuit failsafe receiver
Applications
- Point-to-point baseband (single-end terminated) data transmission over controlled impedance media
- Multipoint (double-end terminated) data transmission over controlled impedance media
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Signal Buffers, Repeaters, Splitters | |
| Manufacturer | TI | |
| Packaging | SOIC-16 | |
| Type | Buffer;Multiplexer | |
| Voltage - Supply | 3V~3.6V | |
| Number of Drivers | - | |
| Features | Fail-safe | |
| Operating Temperature | -40℃~+85℃ | |
| Level Standard | LVDS | |
| Number of Receivers | - | |
| Data Rate | 250Mbps |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Signal Buffers, Repeaters, Splitters | |
| Manufacturer | TI | |
| Packaging | SOIC-16 | |
| Type | Buffer;Multiplexer | |
| Voltage - Supply | 3V~3.6V | |
| Number of Drivers | - |
| Type | Description | |
|---|---|---|
| Features | Fail-safe | |
| Operating Temperature | -40℃~+85℃ | |
| Level Standard | LVDS | |
| Number of Receivers | - | |
| Data Rate | 250Mbps |
Introduction
The SN65LVDS22 and SN65LVDM22 are differential line drivers and receivers using LVDS technology, capable of signal transmission rates up to 400 Mbps. Multiplexer control signals S0 and S1 allow the receiver output to be switched to either or both drivers, enabling splitter or signal routing functions with a single device for added flexibility. The electrical interface complies with TIA/EIA-644 and provides a minimum differential output voltage swing of 247 mV into a 100Ω load, and can receive 100 mV signals with up to 1 V ground potential difference between transmitter and receiver. The SN65LVDM22 doubles the output drive current to achieve LVDS levels into a 50Ω load. These devices and their signaling technology are suited for point-to-point baseband (single-end terminated) and multipoint (double-end terminated) data transmission over controlled-impedance media, including PCB traces, backplanes, or cables. The ultimate data transmission rate and distance depend on the attenuation characteristics of the medium, noise coupling from the environment, and other application-specific factors. The SN65LVDS22 and SN65LVDM22 operate over a temperature range of -40℃ to 85℃. These devices incorporate limited ESD protection; during storage or handling, pins should be shorted together or the devices placed in conductive foam to prevent electrostatic damage to MOS gates.
Features
- Meets or exceeds ANSI TIA/EIA-644-1995 standard requirements
- Designed for clock rates up to 200 MHz (400 Mbps)
- Designed for data rates up to 250 Mbps
- Bus pin ESD protection exceeding 12 kV
- Single 3.3 V supply operation
- Low-voltage differential signaling: SN65LVDS22 output voltage 350 mV into 100Ω load; SN65LVDM22 output voltage 350 mV into 50Ω load
- Typical propagation delay of 4 ns
- 150 mW power consumption at 400 Mbps
- Bus pins high-impedance when disabled or VCC below 1.5 V
- LVTTL levels, 5 V tolerant
- Open-circuit failsafe receiver
Applications
- Point-to-point baseband (single-end terminated) data transmission over controlled impedance media
- Multipoint (double-end terminated) data transmission over controlled impedance media
C1522680 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 5A991B1 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 5A991B1 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |



