NXP MC56F81646VLF
| Manufacturer | |
| MPN | MC56F81646VLF |
| LCSC Part # | C1020209 |
| Packaging | LQFP-48(7x7) |
| Customer # | |
| Key Attributes | 100MHz LQFP-48(7x7) DSP (Digital Signal Processors) RoHS |
| Datasheet | NXP MC56F81646VLF |
| RoHS Compliance | 2 documents available |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Embedded/DSP (Digital Signal Processors) | |
| Manufacturer | NXP | |
| Packaging | LQFP-48(7x7) | |
| Type | - | |
| Operating Temperature | -40℃~+105℃ | |
| Features | Hardware MAC acceleration;Hardware FFT acceleration;Zero-overhead loop;Parallel data channel;DMA data transfer;High-speed peripheral interface;Integrated ADC interface;Integrated PWM control;Interrupt response;RTC and timer | |
| Clock Rate | 100MHz |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Embedded/DSP (Digital Signal Processors) | |
| Manufacturer | NXP | |
| Packaging | LQFP-48(7x7) | |
| Type | - |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+105℃ | |
| Features | Hardware MAC acceleration;Hardware FFT acceleration;Zero-overhead loop;Parallel data channel;DMA data transfer;High-speed peripheral interface;Integrated ADC interface;Integrated PWM control;Interrupt response;RTC and timer | |
| Clock Rate | 100MHz |
Introduction
This family of digital signal controllers (DSCs) is based on the 32-bit 56800EX core. On a single chip, each device combines the processing power of a DSP and the functionality of an MCU, with a flexible set of peripherals to support many target applications: – Industrial control – Motion control – Home appliances General-purpose inverters – Smart sensors, fire and security systems Wireless charging – Switched-mode power supply and power management Uninterruptible power supplies (UPS) – Solar inverter – Medical monitoring applications
Features
- DSC based on 32-bit 56800EX core
- Up to 100 MIPS at 100 MHz core frequency in fast mode
- DSP and MCU functionality in a unified, C-efficient architecture
- On-chip memory: Up to 128 KB flash memory, Up to 20 KB data/program RAM
- Both on-chip flash memory and RAM can be mapped into both program and data memory spaces
- Boot ROM (supports boot from SCI, I2C)
- Analog: Two high-speed, 12-bit ADCs with dynamic x1, x2, and x4 programmable amplifier
- Two operational amplifiers, programmable gain up to x16
- Up to four analog comparators with integrated 8-bit DAC references
- One 12-bit digital-to-analog converters (DAC)
- On-chip temperature sensors
- One high resolution eFlexPWM module with up to 12 PWM outputs, including 8 channels with 312ps resolution NanoEdge placement
- Communication interfaces: Up to two high-speed queued SCI (QSCI) modules with LIN slave functionality
- One queued SPI (QSPI) modules
- Up to two LPI2C modules (Support Full PMBus)
- Timers: One 16-bit quad timer (1 x 4 16-bit timer)
- Two 32-bit Periodic Interval Timers (PITs)
- One Quadrature Decoder (QDC)
- Security and integrity: Cyclic Redundancy Check (CRC) generator
- Windowed Computer operating properly (COP) watchdog
- External Watchdog Monitor (EWM)
- Clocks: On-chip oscillators: 200 kHz, and 8/2MHz IRC
- Crystal / resonator oscillator
- System: 4-channel enhanced DMA controller, supporting up to 63 request sources
- Integrated power-on reset (POR) and low-voltage interrupt (LVI) and brown-out reset module
- Inter-Module Crossbar and Event Generator
- JTAG/enhanced on-chip emulation (EOnCE) for unobtrusive, real-time debugging
- Operating characteristics: Single supply: 2.7 V to 3.6 V
- Operation ambient temperature (V): -40 to 105℃
- Operation ambient temperature (M): -40 to 125℃
Applications
- Industrial control
- Motion control
- Home appliances
- General-purpose inverters
- Smart sensors, fire and security systems
- Wireless charging
- Switched-mode power supply and power management
- Uninterruptible power supplies (UPS)
- Solar inverter
- Medical monitoring applications
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Embedded/DSP (Digital Signal Processors) | |
| Manufacturer | NXP | |
| Packaging | LQFP-48(7x7) | |
| Type | - | |
| Operating Temperature | -40℃~+105℃ | |
| Features | Hardware MAC acceleration;Hardware FFT acceleration;Zero-overhead loop;Parallel data channel;DMA data transfer;High-speed peripheral interface;Integrated ADC interface;Integrated PWM control;Interrupt response;RTC and timer | |
| Clock Rate | 100MHz |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Embedded/DSP (Digital Signal Processors) | |
| Manufacturer | NXP | |
| Packaging | LQFP-48(7x7) | |
| Type | - |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+105℃ | |
| Features | Hardware MAC acceleration;Hardware FFT acceleration;Zero-overhead loop;Parallel data channel;DMA data transfer;High-speed peripheral interface;Integrated ADC interface;Integrated PWM control;Interrupt response;RTC and timer | |
| Clock Rate | 100MHz |
Introduction
This family of digital signal controllers (DSCs) is based on the 32-bit 56800EX core. On a single chip, each device combines the processing power of a DSP and the functionality of an MCU, with a flexible set of peripherals to support many target applications: – Industrial control – Motion control – Home appliances General-purpose inverters – Smart sensors, fire and security systems Wireless charging – Switched-mode power supply and power management Uninterruptible power supplies (UPS) – Solar inverter – Medical monitoring applications
Features
- DSC based on 32-bit 56800EX core
- Up to 100 MIPS at 100 MHz core frequency in fast mode
- DSP and MCU functionality in a unified, C-efficient architecture
- On-chip memory: Up to 128 KB flash memory, Up to 20 KB data/program RAM
- Both on-chip flash memory and RAM can be mapped into both program and data memory spaces
- Boot ROM (supports boot from SCI, I2C)
- Analog: Two high-speed, 12-bit ADCs with dynamic x1, x2, and x4 programmable amplifier
- Two operational amplifiers, programmable gain up to x16
- Up to four analog comparators with integrated 8-bit DAC references
- One 12-bit digital-to-analog converters (DAC)
- On-chip temperature sensors
- One high resolution eFlexPWM module with up to 12 PWM outputs, including 8 channels with 312ps resolution NanoEdge placement
- Communication interfaces: Up to two high-speed queued SCI (QSCI) modules with LIN slave functionality
- One queued SPI (QSPI) modules
- Up to two LPI2C modules (Support Full PMBus)
- Timers: One 16-bit quad timer (1 x 4 16-bit timer)
- Two 32-bit Periodic Interval Timers (PITs)
- One Quadrature Decoder (QDC)
- Security and integrity: Cyclic Redundancy Check (CRC) generator
- Windowed Computer operating properly (COP) watchdog
- External Watchdog Monitor (EWM)
- Clocks: On-chip oscillators: 200 kHz, and 8/2MHz IRC
- Crystal / resonator oscillator
- System: 4-channel enhanced DMA controller, supporting up to 63 request sources
- Integrated power-on reset (POR) and low-voltage interrupt (LVI) and brown-out reset module
- Inter-Module Crossbar and Event Generator
- JTAG/enhanced on-chip emulation (EOnCE) for unobtrusive, real-time debugging
- Operating characteristics: Single supply: 2.7 V to 3.6 V
- Operation ambient temperature (V): -40 to 105℃
- Operation ambient temperature (M): -40 to 125℃
Applications
- Industrial control
- Motion control
- Home appliances
- General-purpose inverters
- Smart sensors, fire and security systems
- Wireless charging
- Switched-mode power supply and power management
- Uninterruptible power supplies (UPS)
- Solar inverter
- Medical monitoring applications
C1020209 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |

