LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
ADI LTC3603EMSE#PBF product image
Images for reference only

ADI LTC3603EMSE#PBF

Manufacturer
MPN
LTC3603EMSE#PBF
LCSC Part #
C685165
Packaging
MSOP-16-EP
Customer #
Key Attributes
1MHz Step-down type Adjustable 2.5A 600mV~14.5V MSOP-16-EP Voltage Regulators - DC DC Switching Regulators RoHS
DatasheetADI LTC3603EMSE#PBF
RoHS Compliance1 documents available
Alternative Parts7
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement
Out of Stock
Notify Me
Minimum: 1Multiple: 1Sales Unit: Piece
Add to BOM List
QtyUnit Price(Reference Only)Total Amount
1+$ 5.4778$ 5.48
200+$ 2.1208$ 424.16
500+$ 2.0451$ 1022.55
1,000+$ 2.0096$ 2009.60
Standard Packaging37/Full Tube
Better price for more quantity?
$

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators
ManufacturerADI
PackagingMSOP-16-EP
Operating Temperature-40℃~+125℃@(TJ)
Frequency - Switching1MHz
FunctionStep-down type
Number of Outputs1
FeaturesFrequency synchronization;Operating status indication;Built-in LDO regulator;Adjustable soft-start;Output voltage tracking;Light load efficient mode;Overcurrent Protection
Output TypeAdjustable
TopologyBuck
Operating Voltage4.5V~15V
Switch tube (built-in/external)Built-in
Output Current2.5A
Output Voltage600mV~14.5V
Quiescent Current75uA

Introduction

AI Translation

The LTC3603 is a high efficiency, monolithic synchronous step-down DC/DC converter utilizing a constant-frequency, current mode architecture. It operates from an input voltage range of 4.5V to 15V and provides an adjustable regulated output voltage from 0.6V to 14.5V while delivering up to 2.5A of output current. The internal synchronous power switch with 45mΩ on-resistance increases efficiency and eliminates the need for an external Schottky diode. The switching frequency can either be set by an external resistor or synchronized to an external clock. OPTI-LOOP compensation allows the transient response to be optimized over a wide range of loads and output capacitors.

The LTC3603 can be configured for either Burst Mode operation or forced continuous operation. Forced continuous operation reduces noise and RF interference, while Burst Mode operation provides the highest efficiency at light loads. In Burst Mode operation, external control of the burst clamp level allows the output voltage ripple to be adjusted according to the requirements of the application.

Features

AI Translation
  • Wide Input Voltage Range: 4.5V to 15V
  • 2.5A Output Current
  • Low RDS(ON) Internal Switches: 45mΩ and 85mΩ
  • Programmable Frequency: 300kHz to 3MHz
  • Low Quiescent Current: 75µA
  • 0.6V±1% Reference Allows Precise, Low Output Voltage
  • 99% Maximum Duty Cycle
  • Adjustable Burst Mode Clamp
  • Synchronizable to External Clock
  • Power Good Output Voltage Monitor
  • Overtemperature Protection
  • Overvoltage Protection
  • Available in 16-Lead Thermally Enhanced eMSOP and 4mm × 4mm QFN Packages

Applications

AI Translation
  • Point-of-Load Supplies
  • Portable Instruments
  • Communications Infrastructure

Alternative Parts

MPNManufacturerPackagingAvailabilityUnit Price
LTC3603IMSE#PBFADIMSOP-16-EP0$ 4.891
LTC3603EMSE#TRPBFADIMSOP-16-EP0$ 5.9779
LTC3603IMSE#TRPBFADIMSOP-16-EP0$ 7.0151
LTC3604EMSE#PBFADIMSOP-16-EP0$ 16.0652
LTC3604EMSE#TRPBFADIMSOP-16-EP0$ 5.9779
LTC3604IMSE#PBFADIMSOP-16-EP0$ 14.4639
LTC3604IMSE#TRPBFADIMSOP-16-EP0$ 6.6339