Name: ChromeLED CDSA52Y1W
Brand: ChromeLED
SKU: C6149201
Price: 1.0244 USD
Availability: OutOfStock

Tolerances are ±0.25mm (0.01") unless otherwise specified.
Specifications are subject to change without notice.
When soldering LEDs, maintain a minimum distance of 3mm from the base of the epoxy bulb. Soldering beyond the lead frame base is recommended.
Recommended soldering conditions.
Do not apply any stress to the leads, especially during heating.
Do not reposition LEDs after soldering.
After soldering, protect the epoxy bulb from mechanical shock or vibration until the LED has returned to room temperature.
Direct soldering to PC boards should be avoided. PC board warpage or clamping and cutting of the lead frame may cause mechanical stress to the resin. If absolutely necessary, LEDs may be mounted in this manner, but the user assumes responsibility for any issues. Direct soldering should only be performed after testing confirms that no damage such as wire bond failure or resin degradation will occur. LEDs should not be soldered directly to double-sided PC boards, as heat may degrade the epoxy resin.
When LEDs must be clamped to prevent soldering failure, it is important to minimize mechanical stress on the LED.
Cut the LED lead frame at room temperature. Cutting the lead frame at elevated temperatures may cause LED failure.

Tolerances are ±0.25mm (0.01") unless otherwise specified.
Specifications are subject to change without notice.
When soldering LEDs, maintain a minimum distance of 3mm from the base of the epoxy bulb. Soldering beyond the lead frame base is recommended.
Recommended soldering conditions.
Do not apply any stress to the leads, especially during heating.
Do not reposition LEDs after soldering.
After soldering, protect the epoxy bulb from mechanical shock or vibration until the LED has returned to room temperature.
Direct soldering to PC boards should be avoided. PC board warpage or clamping and cutting of the lead frame may cause mechanical stress to the resin. If absolutely necessary, LEDs may be mounted in this manner, but the user assumes responsibility for any issues. Direct soldering should only be performed after testing confirms that no damage such as wire bond failure or resin degradation will occur. LEDs should not be soldered directly to double-sided PC boards, as heat may degrade the epoxy resin.
When LEDs must be clamped to prevent soldering failure, it is important to minimize mechanical stress on the LED.
Cut the LED lead frame at room temperature. Cutting the lead frame at elevated temperatures may cause LED failure.

Manufacturer	ChromeLED
MPN	CDSA52Y1W
LCSC Part #	C6149201
Packaging	DIP-10
Customer #
Key Attributes	Yellow 1 75mW Common Anode 0.52 DIP-10 LED Character and Numeric RoHS
Datasheet	ChromeLED CDSA52Y1W
Alternative Parts	3

Type	Description
Category	Optoelectronics/LED Character and Numeric
Manufacturer	ChromeLED
Packaging	DIP-10
Illumination Color	Yellow
Display Type	7 Segment
Number of Characters	1
Pd - Power Dissipation	75mW
LED Polarity	Common Anode
Operating Temperature	-40℃~+85℃
Height	-
Digit/Alpha Size(inch)	0.52
Width	-
Length	-
Forward Voltage Drop	2.1V
Light Intensity	4.7mcd

Type	Description
Category	Optoelectronics/LED Character and Numeric
Manufacturer	ChromeLED
Packaging	DIP-10
Illumination Color	Yellow
Display Type	7 Segment
Number of Characters	1
Pd - Power Dissipation	75mW
LED Polarity	Common Anode

Qty	Unit Price(Reference Only)	Total Amount
1+	$ 2.7003	$ 2.70
200+	$ 1.0774	$ 215.48
500+	$ 1.0426	$ 521.30
1,000+	$ 1.0244	$ 1024.40
Standard Packaging1/Full Tray

ChromeLED CDSA52Y1W

Products Specifications

MPN	Manufacturer	Packaging	Unit Price
A521Y G/W	American Opto Plus LED	DIP-10	$ 0.9109
XDUY13A	SunLED	DIP-10	$ 2.1686
A501Y G/W	American Opto Plus LED	DIP-10	$ 0.9107