Bel Fuse DP7120G-R100
| Manufacturer | |
| MPN | DP7120G-R100 |
| LCSC Part # | C6022013 |
| Packaging | - |
| Customer # | |
| Key Attributes | 700mV~5.5V 8V~14V DC DC Converters RoHS |
| Datasheet | Bel Fuse DP7120G-R100 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Power Supplies/Power Suppliers - Board Mount/DC DC Converters | |
| Manufacturer | Bel Fuse | |
| Packaging | - | |
| Output Voltage | 700mV~5.5V | |
| Ripple Noise | 10mVp-p;20mVp-p;40mVp-p;18mVp-p;35mVp-p;50mVp-p | |
| Operating Temperature | -40℃~+85℃ | |
| Type | - | |
| Quiescent Supply Current | - | |
| Voltage - Supply | 8V~14V | |
| Capacitive Load(Max) | - | |
| Number of Outputs | 1 | |
| Iout | 20A | |
| Height | 14mm | |
| Frequency - Switching | 500kHz;1MHz | |
| Isolation Voltage(Vrms) | - | |
| Output Power | - | |
| Features | Digital control architecture;Dynamic voltage scaling;Power-on timing control;Programmable soft start;Over Current Protection;Overvoltage protection;Under Voltage Protection;Over-temperature protection;Remote sampling compensation | |
| Conversion Efficiency | - | |
| Length | 32mm | |
| Width | 8mm |
| Type | Description | |
|---|---|---|
| Category | Power Supplies/Power Suppliers - Board Mount/DC DC Converters | |
| Manufacturer | Bel Fuse | |
| Packaging | - | |
| Output Voltage | 700mV~5.5V | |
| Ripple Noise | 10mVp-p;20mVp-p;40mVp-p;18mVp-p;35mVp-p;50mVp-p | |
| Operating Temperature | -40℃~+85℃ | |
| Type | - | |
| Quiescent Supply Current | - | |
| Voltage - Supply | 8V~14V | |
| Capacitive Load(Max) | - |
| Type | Description | |
|---|---|---|
| Number of Outputs | 1 | |
| Iout | 20A | |
| Height | 14mm | |
| Frequency - Switching | 500kHz;1MHz | |
| Isolation Voltage(Vrms) | - | |
| Output Power | - | |
| Features | Digital control architecture;Dynamic voltage scaling;Power-on timing control;Programmable soft start;Over Current Protection;Overvoltage protection;Under Voltage Protection;Over-temperature protection;Remote sampling compensation | |
| Conversion Efficiency | - | |
| Length | 32mm | |
| Width | 8mm |
Introduction
Bel Power Solutions DP7120G is an intelligent, fully programmable step-down point-of-load DC-DC converter integrating digital power conversion and intelligent power management. It works with the DM7300 Series Digital Power Managers (DPM) which provides for synchronizing all system Power-On-Load regulators, for an elegant, flexible, low noise power system solution. All key parameters, sequencing, tracking, fault protection, and compensation parameters of the DP7120G are programmable via Bel Power Solutions I2C based GUI. All settings can be changed by a user at any time during product development and service. Once programmed, the DPM remembers all settings and configures the DP7120G through a self-clocking single wire communication bus. FLASH memory in the DPM allows changes to be made without the need to solder or rewire the regulator.
Features
- Input voltage range: 8 V - 14 V Output voltage range: 0.7 V - 5.5 V at 0 - 20 A.
- Programmable dynamic output voltage positioning for better load transient response
- Choice of 500 KHz switching for highest efficiency or 1 MHz for lowest ripple noise.
- Flexible Fault Response features
- Multiple turn-on/off slew rates and delays
- Digital Filter Compensation
- Synchronous operation with other supplies
- Real time performance monitoring
- GUI based configuration for short development time.
- Small footprint Vertical oriented SMT package: 8×32×14 mm
- Compatible with conventional pick-and-place equipment
- Wide operating temperature range -40°C - 85°C
- Approved to the latest edition and amendment of ITE Safety standards, UL/CSA 60950-1 and IEC 60950-1
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 81.1942 | $ 81.19 |
| 200+ | $ 32.3971 | $ 6479.42 |
| 500+ | $ 31.3152 | $ 15657.60 |
| 1,000+ | $ 30.7803 | $ 30780.30 |
Standard Packaging100/Full Reel | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Power Supplies/Power Suppliers - Board Mount/DC DC Converters | |
| Manufacturer | Bel Fuse | |
| Packaging | - | |
| Output Voltage | 700mV~5.5V | |
| Ripple Noise | 10mVp-p;20mVp-p;40mVp-p;18mVp-p;35mVp-p;50mVp-p | |
| Operating Temperature | -40℃~+85℃ | |
| Type | - | |
| Quiescent Supply Current | - | |
| Voltage - Supply | 8V~14V | |
| Capacitive Load(Max) | - | |
| Number of Outputs | 1 | |
| Iout | 20A | |
| Height | 14mm | |
| Frequency - Switching | 500kHz;1MHz | |
| Isolation Voltage(Vrms) | - | |
| Output Power | - | |
| Features | Digital control architecture;Dynamic voltage scaling;Power-on timing control;Programmable soft start;Over Current Protection;Overvoltage protection;Under Voltage Protection;Over-temperature protection;Remote sampling compensation | |
| Conversion Efficiency | - | |
| Length | 32mm | |
| Width | 8mm |
| Type | Description | |
|---|---|---|
| Category | Power Supplies/Power Suppliers - Board Mount/DC DC Converters | |
| Manufacturer | Bel Fuse | |
| Packaging | - | |
| Output Voltage | 700mV~5.5V | |
| Ripple Noise | 10mVp-p;20mVp-p;40mVp-p;18mVp-p;35mVp-p;50mVp-p | |
| Operating Temperature | -40℃~+85℃ | |
| Type | - | |
| Quiescent Supply Current | - | |
| Voltage - Supply | 8V~14V | |
| Capacitive Load(Max) | - |
| Type | Description | |
|---|---|---|
| Number of Outputs | 1 | |
| Iout | 20A | |
| Height | 14mm | |
| Frequency - Switching | 500kHz;1MHz | |
| Isolation Voltage(Vrms) | - | |
| Output Power | - | |
| Features | Digital control architecture;Dynamic voltage scaling;Power-on timing control;Programmable soft start;Over Current Protection;Overvoltage protection;Under Voltage Protection;Over-temperature protection;Remote sampling compensation | |
| Conversion Efficiency | - | |
| Length | 32mm | |
| Width | 8mm |
Introduction
Bel Power Solutions DP7120G is an intelligent, fully programmable step-down point-of-load DC-DC converter integrating digital power conversion and intelligent power management. It works with the DM7300 Series Digital Power Managers (DPM) which provides for synchronizing all system Power-On-Load regulators, for an elegant, flexible, low noise power system solution. All key parameters, sequencing, tracking, fault protection, and compensation parameters of the DP7120G are programmable via Bel Power Solutions I2C based GUI. All settings can be changed by a user at any time during product development and service. Once programmed, the DPM remembers all settings and configures the DP7120G through a self-clocking single wire communication bus. FLASH memory in the DPM allows changes to be made without the need to solder or rewire the regulator.
Features
- Input voltage range: 8 V - 14 V Output voltage range: 0.7 V - 5.5 V at 0 - 20 A.
- Programmable dynamic output voltage positioning for better load transient response
- Choice of 500 KHz switching for highest efficiency or 1 MHz for lowest ripple noise.
- Flexible Fault Response features
- Multiple turn-on/off slew rates and delays
- Digital Filter Compensation
- Synchronous operation with other supplies
- Real time performance monitoring
- GUI based configuration for short development time.
- Small footprint Vertical oriented SMT package: 8×32×14 mm
- Compatible with conventional pick-and-place equipment
- Wide operating temperature range -40°C - 85°C
- Approved to the latest edition and amendment of ITE Safety standards, UL/CSA 60950-1 and IEC 60950-1
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |