LCSC Electronics logoLCSC Electronics svg logo
Entrar
USD
TI LM4132DMF-2.5/NOPB product image
  • LM4132DMF-2.5/NOPB thumbnail 1
  • LM4132DMF-2.5/NOPB thumbnail 2
  • LM4132DMF-2.5/NOPB thumbnail 3
  • Pinagem
  • Footprint
Imagens ilustrativas

TI LM4132DMF-2.5/NOPB

Fabricante
Cód. da peça
LM4132DMF-2.5/NOPB
Nº LCSC
C50063
Emb.
SOT-23-5
Número do Cliente
Atrib. princ.
SOT-23 Precision Low Dropout Voltage Reference
Folha de DadosTI LM4132DMF-2.5/NOPB
Conformidade RoHS2 documentos disponíveis
Peças alternativas10
Em estoque: 17
17 Em estoque, envio imediato
Mínimo: 1Múltiplo: 1Unidade de venda: Piece
Adicionar à Lista BOM
Qtd.Preço unit.Valor total
1+$ 2.1768$ 2.18
10+$ 2.1214$ 21.21
30+$ 2.0838$ 62.51
100+$ 2.0479$ 204.79
Encapsulamento Padrão3000/Full Reel
Melhor preço para maior quantidade?
$

Especificações do Produto

Tudo
TipoDescrição
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Reference
FabricanteTI
Emb.SOT-23-5
Output Voltage2.5V
Quiescent Current100uA
Tolerance±0.4%
Voltage - Supply2.9V~5.5V
Minimum Cathode Current for Regulation-
Reference TypeSeries
Noise - 1/10Hz to 10Hz240uVp-p
Output Current20mA
Operating Temperature-40℃~+125℃
FeaturesEnable/disable
Noise - 10Hz to 10kHz-
Output TypeFixed

Descrição

Tradução por IA

The LM4132 family of precision voltage references performs comparable to the best laser-trimmed bipolar references, but in cost effective CMOS technology. The key to this break through is the use of EEPROM registers for correction of curvature, tempco, and accuracy on a CMOS bandgap architecture that allows package level programming to overcome assembly shift. The shifts in voltage accuracy and tempco during assembly of die into plastic packages limit the accuracy of references trimmed with laser techniques. Unlike other LDO references, the LM4132 is capable of delivering up to 20mA and does not require an output capacitor or buffer amplifier. These advantages and the SOT23 packaging are important for space-critical applications. Series references provide lower power consumption than shunt references, since they do not have to idle the maximum possible load current under no load conditions. This advantage, the low quiescent current (60μA), and the low dropout voltage (400mV) make the LM4132 ideal for battery-powered solutions. The LM4132 is available in five grades (A, B, C, D and E) for greater flexibility. The best grade devices (A) have an initial accuracy of 0.05% with a specified temperature coefficient of 10ppm/°C or less, while the lowest grade parts (E) have an initial accuracy of 0.5% and a tempco of 30ppm/°C.

Recursos

Tradução por IA
  • Output Initial Voltage Accuracy 0.05%
  • Low Temperature Coefficient 10 ppm/°C
  • Low Supply Current, 60 μA
  • Enable Pin Allowing a 3 μA Shutdown Mode
  • 20 mA Output Current
  • Voltage Options 1.8V, 2.048 V, 2.5 V, 3.0 V, 3.3 V, 4.096 V
  • Custom Voltage Options Available (1.8V to 4.096V)
  • VIN Range of VREF + 400 mV to 5.5 V @ 0 mA
  • Stable with Low ESR Ceramic Capacitors
  • SOT23-5 Package
  • LM4132AQ1/BQ1/CQ1/DQ1/EQ1 are AEC Q-100 grade 1 qualified and are manufactured on an Automotive Grade flow

Aplicações

Tradução por IA
  • Instrumentation & Process Control
  • Test Equipment Data Acquisition Systems
  • Base Stations
  • Servo Systems
  • Portable, Battery Powered Equipment
  • Automotive & Industrial
  • Precision Regulators
  • Battery Chargers
  • Communications
  • Medical Equipment

Peças alternativas

MPNFabricanteEmbalagemDisponibilidadePreço unitário
LM4132DMFX-2.5/NOPBTISOT-23-54$ 2.8495
LM4132CMFX-2.5/NOPBTISOT-23-59$ 3.1656
LM4132CQ1MFT2.5TISOT-23-515$ 4.3521
LM4132AMF-2.5/NOPBTISOT-23-5247$ 5.0046
LM4132AMFX-2.5/NOPBTISOT-23-524$ 4.8888
LM4132DQ1MFT2.5TISOT-23-50$ 4.6613
LM4132DQ1MFR2.5TISOT-23-50$ 3.6228
LM4132CMF-2.5/NOPBTISOT-23-50$ 2.3711
LM4132BMFX-2.5/NOPBTISOT-23-50$ 2.6794
MAX6129AEUK25+TMAXIMSOT-23-50$ 3.4106