- Pinout
- Footprint
MAXIM MAX3471EUA+
| Manufacturer | |
| MPN | MAX3471EUA+ |
| LCSC Part # | C400153 |
| Packaging | MSOP-8 |
| Customer # | |
| Key Attributes | RS-485/RS-422, Differential Transceiver for Battery-Powered Systems |
| Datasheet | MAXIM MAX3471EUA+ |
| RoHS Compliance | 1 documents available |
| Alternative Parts | 3 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MAXIM | |
| Packaging | MSOP-8 | |
| Voltage - Supply | 2.5V~5.5V | |
| Type | Transceiver | |
| Data Rate | 64Kbps | |
| Number of Nodes | - | |
| Operating Temperature | -40℃~+85℃ | |
| ESD Protect | - | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 1 | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 1.6uA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MAXIM | |
| Packaging | MSOP-8 | |
| Voltage - Supply | 2.5V~5.5V | |
| Type | Transceiver | |
| Data Rate | 64Kbps | |
| Number of Nodes | - |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+85℃ | |
| ESD Protect | - | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 1 | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 1.6uA |
Introduction
The MAX3471 half- duplex transceiver is intended for lithium battery- powered RS- 485/RS- 422 applications. It draws only 1.6μA (typical) supply current from a 3.6V supply with the receiver enabled and the driver disabled. Its wide 2.5V to 5.5V supply voltage guarantees operation over the lifetime of a lithium battery. This device features true fail- safe operation that guarantees a logic- high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be a logic high if all transmitters on a terminated bus are disabled (high impedance). The MAX3471 has a 1/8- unit load input resistance. When driver outputs are enabled and pulled above VCC or below GND, internal circuitry prevents battery backcharging. The MAX3471 is available in an 8- pin μMAX package.
Features
- +1.6μA Supply Current with Receiver Enabled
- +2.5V to +5.5V Single- Supply Operation
- True Fail- Safe Receiver Input
- Available in μMAX Package
- 1/8- Unit- Load Receiver Input
-
- 7V to +10V Common- Mode Input Voltage Range
Applications
- Remote Meter Reading
- Battery- Powered Differential Communications
- Level Translators
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 3.3596 | $ 3.36 |
| 10+ | $ 2.9057 | $ 29.06 |
| 50+ | $ 2.6221 | $ 131.11 |
| 100+ | $ 2.3304 | $ 233.04 |
| 500+ | $ 2.1993 | $ 1099.65 |
| 1,000+ | $ 2.142 | $ 2142.00 |
Standard Packaging50/Full Tube | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MAXIM | |
| Packaging | MSOP-8 | |
| Voltage - Supply | 2.5V~5.5V | |
| Type | Transceiver | |
| Data Rate | 64Kbps | |
| Number of Nodes | - | |
| Operating Temperature | -40℃~+85℃ | |
| ESD Protect | - | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 1 | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 1.6uA |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Interface/Drivers, Receivers, Transceivers | |
| Manufacturer | MAXIM | |
| Packaging | MSOP-8 | |
| Voltage - Supply | 2.5V~5.5V | |
| Type | Transceiver | |
| Data Rate | 64Kbps | |
| Number of Nodes | - |
| Type | Description | |
|---|---|---|
| Operating Temperature | -40℃~+85℃ | |
| ESD Protect | - | |
| Communication Mode | Half-Duplex | |
| Number of Drivers | 1 | |
| Features | Tx/Rx enable;Enable shutdown;Overcurrent Protection | |
| Number of Receivers | 1 | |
| Quiescent Supply Current | 1.6uA |
Introduction
The MAX3471 half- duplex transceiver is intended for lithium battery- powered RS- 485/RS- 422 applications. It draws only 1.6μA (typical) supply current from a 3.6V supply with the receiver enabled and the driver disabled. Its wide 2.5V to 5.5V supply voltage guarantees operation over the lifetime of a lithium battery. This device features true fail- safe operation that guarantees a logic- high receiver output when the receiver inputs are open or shorted. This means that the receiver output will be a logic high if all transmitters on a terminated bus are disabled (high impedance). The MAX3471 has a 1/8- unit load input resistance. When driver outputs are enabled and pulled above VCC or below GND, internal circuitry prevents battery backcharging. The MAX3471 is available in an 8- pin μMAX package.
Features
- +1.6μA Supply Current with Receiver Enabled
- +2.5V to +5.5V Single- Supply Operation
- True Fail- Safe Receiver Input
- Available in μMAX Package
- 1/8- Unit- Load Receiver Input
-
- 7V to +10V Common- Mode Input Voltage Range
Applications
- Remote Meter Reading
- Battery- Powered Differential Communications
- Level Translators
C400153 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8542399000 |
| USHTS | 8542390001 |
| TARIC | 8542399000 |
| Type | Details |
|---|---|
| CAHTS | 8542390000 |
| BRHTS | 85423999 |
| INHTS | 85423900 |
| MXHTS | 8542.39.99 |
Alternative Parts
| MPN | Manufacturer | Packaging | Availability | Unit Price | ||
|---|---|---|---|---|---|---|
| MAX3471EUA+T | MAXIM | MSOP-8 | 13,331 | $ 2.5231 | ||
| WS3471EEUA | NJGW | MSOP-8 | 2,824 | $ 1.5215 | ||
| COS3471MR-3.3 | COSINE | MSOP-8 | 443 | $ 1.0675 |