LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD
TI CD74HCT573M96 product image
Images for reference only

TI CD74HCT573M96

Manufacturer
TI
MPN
CD74HCT573M96
LCSC Part #
C2863738
Packaging
SOIC-20-300mil
Customer #
Key Attributes
Octal transparent D-type latches with three-state outputs
DatasheetTI CD74HCT573M96
RoHS Compliance2 documents available
Alternative Parts5
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Logic/Latches
ManufacturerTI
PackagingSOIC-20-300mil
Quiescent Current8uA
Logic TypeD Latch
Series74HCT
Voltage - Supply4.5V~5.5V
Output TypeTri-State
Operating Temperature-55℃~+125℃
Number of Gates8
Setup Time13ns
Hold Time10ns
Propagation Delay35ns
Help & FeedbackShow similar products (0) >

Introduction

AI Translation
  • 4.5V to 5.5V VCC operation
  • Wide operating temperature range: -55°C to 125°C
  • Balanced propagation delay and transition times
  • Standard outputs drive up to 10 LS-TTL loads
  • Significantly reduced power consumption vs. LS-TTL logic ICs
  • TTL-compatible inputs
  • HCT573 devices are octal transparent D-type latches. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is low, the Q outputs are latched at the logic levels of the D inputs.
  • The 'HCT573 devices are octal transparent D-type latches. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is low, the Q outputs are latched at the logic levels of the D inputs.
  • A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pullup components.
  • OE does not affect the internal operations of the latches. Old data can be retained or new data can be entered while the outputs are in the high-impedance state.
  • To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Features

AI Translation
  • 4.5V to 5.5V VCC operation
  • Wide operating temperature range: -55°C to 125°C
  • Balanced propagation delay and transition time
  • Standard output drives up to 10 LS-TTL loads
  • Significantly reduced power consumption vs. LS-TTL logic ICs
  • TTL-compatible inputs