LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

ST STPM098C-TR

Manufacturer
MPN
STPM098C-TR
LCSC Part #
C27338517
Packaging
VFQFPN-48(7x7)
Customer #
Key Attributes
Step-down type 200kHz~1.5MHz Adjustable 500mV~2V VFQFPN-48(7x7) Power Management - Specialized
DatasheetST STPM098C-TR
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/Power Management - Specialized
ManufacturerST
PackagingVFQFPN-48(7x7)
Synchronous Rectifier-
FeaturesAdjustable current limiting;Overcurrent Protection;Built-in LDO regulator;Operating status indication
FunctionStep-down type
Frequency - Switching200kHz~1.5MHz
Operating Temperature-40℃~+125℃
Number of Outputs2
Output TypeAdjustable
TopologyBuck
Quiescent Current-
Voltage - Supply4.75V~5.25V
Output Voltage500mV~2V

Introduction

AI Translation

This device is a dual-loop digital multiphase buck controller with integrated non-volatile memory and PMBus interface, designed for automotive applications. The product is suited for power management of high-power loads such as processor cores and memory. It can control up to 8 external drivers and MOSFETs, providing up to two different output voltages through its two loops. An advanced control loop architecture based on a constant on-time scheme delivers fast transient response and high efficiency. The device also features phase interleaving and dynamic phase addition/shedding to improve efficiency in light-load conditions. The device supports PMBus communication compliant with version 1.2, with 8 possible interface address values, used for reporting voltage, current, power, temperature telemetry, and fault signals. Device programmable parameters configurable via the PMBus interface and stored in on-chip non-volatile memory minimize the number of external components. The device also provides an extensive monitoring and fault protection system, including independent output undervoltage/overvoltage protection, loop feedback disconnection detection, phase current imbalance protection, and dual-threshold overcurrent protection for both positive and negative phase currents.

Features

AI Translation
  • AEC-Q100 compliant
  • Phase distribution between two loops: 8+0 to 4+4
  • Output voltage range: 0.5 V to 2 V
  • Switching frequency range: 200 kHz to 1.5 MHz
  • Programmable dynamic phase shedding (light load) and active diode emulation (very light load)
  • High-performance digital control loop
  • Integrated 40 MHz ARM Cortex M0+ CPU
  • Integrated non-volatile memory
  • PMBus 1.2 support (up to 400 kHz)
  • Full ISO26262 compliance, ASIL-D system support
  • Protection and diagnostic features
  • Input telemetry (voltage, current, power) readable via PMBus
  • Input-based overcurrent, undervoltage, and overpower diagnostics and protection configurable via PMBus
  • Per-loop output telemetry (voltage, current, temperature) readable via PMBus
  • Per-loop output under/overcurrent and under/overvoltage diagnostics and protection configurable via PMBus
  • Per-loop output stage thermal warning and thermal shutdown diagnostics and protection configurable via PMBus
  • Per-phase current telemetry readable via PMBus
  • Per-phase overcurrent diagnostics and protection configurable via PMBus
  • General-purpose undervoltage/overvoltage diagnostics via AUX_SENSE pin configurable via PMBus
  • Feedback loop open diagnostics
  • Internal overtemperature diagnostics and protection
  • Junction temperature measurement readable via PMBus
  • Ground loss diagnostics
  • System clock monitoring
  • Overvoltage and undervoltage diagnostics for supply pins VCC, VREF1, VREF2
  • Fault status flags output via SM_ALERT, FAULT, VRRDY1, VRRDY2 pins

Applications

AI Translation
  • Advanced Driver Assistance Systems
  • High-power microprocessors
  • DDR memory