LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

TI TPS51219RTET

Manufacturer
MPN
TPS51219RTET
LCSC Part #
C2658034
Packaging
QFN-16-EP(3x3)
Customer #
Key Attributes
High-performance single synchronous buck controller
DatasheetTI TPS51219RTET
RoHS Compliance2 documents available
Alternative Parts1
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Power Management (PMIC)/DC DC Switching Controllers
ManufacturerTI
PackagingQFN-16-EP(3x3)
Synchronous RectifierYes
FeaturesOutput voltage differential sensing;Output discharge;Operating status indication;Light load efficient mode;Cycle-by-cycle current limiting;Overcurrent Protection
Number of Channels1
TopologyBuck
Operating Voltage3V~28V
Switch tube (built-in/external)External
Output Voltage500mV~2V
Operating Temperature-40℃~+85℃@(TA)
Output Current20A
Frequency - Switching400kHz;300kHz;670kHz;500kHz
Output TypeAdjustable
FunctionStep-down type
Quiescent Current560uA

Introduction

AI Translation

A compact, single synchronous buck controller supporting adaptive real-time control. It offers a selectable control mode (D-CAP™ or D-CAP2™) to meet a wide range of system requirements. This buck controller satisfies stringent DC regulation requirements, such as VCCIO applications in notebook computers. Its performance and flexibility make it well suited for low output voltage, high current, PC system rail, and similar point-of-load (POL) power supply applications. The combination of differential voltage feedback and voltage positioning delivers high-accuracy power to load devices.

The compact package, fixed voltage options, and minimal external component count save cost and board space, while a dedicated EN pin and preset frequency selection minimize design effort. Skip mode under light-load conditions, robust gate drivers, and low-side FET RDS(on) current sensing provide high efficiency across a wide load range. An external resistor current sensing option enables accurate current sensing. The switching input voltage (high-side FET drain voltage) ranges from 3 V to 28 V, with an output voltage range of 0.5 V to 2.0 V. This device requires an external 5 V supply. It is housed in a 16-pin QFN package and is rated for an ambient operating temperature of −40°C to 85°C.

Features

AI Translation
  • Differential voltage feedback for accurate DC regulation
  • Wide input voltage range: 3 V to 28 V
  • Output voltage range: 0.5 V to 2.0 V, with fixed 1.05 V and 1.00 V options
  • Wide output load range: 0 A to 20 A+
  • Adaptive on-time modulation with selectable control topology and frequency
  • D-CAP™ 300 kHz/400 kHz mode for fast transient response
  • D-CAP2™ 500 kHz/670 kHz mode for ceramic output capacitors
  • 4700 ppm/°C low-side RDS(on) current sensing
  • RSENSE accurate current sensing option
  • Internal 1-ms voltage servo soft-start
  • Integrated output discharge
  • Power-good output
  • Integrated boost switch
  • Built-in OVP/UVP/OCP
  • Thermal shutdown (non-latching)
  • 3 mm × 3 mm, 16-pin QFN (RTE) package

Applications

AI Translation
  • Notebook I/O power supply