LCSC Electronics logoLCSC Electronics svg logo
Sign In
USD

MaxLinear ST16C650ACJ44TR-F

Manufacturer
MPN
ST16C650ACJ44TR-F
LCSC Part #
C2653231
Packaging
PLCC-44(16.59x16.59)
Customer #
Key Attributes
PLCC-44(16.59x16.59) UARTs (Universal Asynchronous Receiver Transmitter) RoHS
DatasheetMaxLinear ST16C650ACJ44TR-F
Every Order Guarantee
100% Authentic · 30-Day Return or Replacement

Products Specifications

All
TypeDescription
CategoryIntegrated Circuits (ICs)/Interface/UARTs (Universal Asynchronous Receiver Transmitter)
ManufacturerMaxLinear
PackagingPLCC-44(16.59x16.59)
FeaturesHardware flow control support;Software flow control support;Automatic RS-485 direction control;With automatic flow control;With IrDA Encoder/Decoder;With False Start Bit Detection;with Modem Control;Internal Oscillator;Printer Port;Timer/Counter
Voltage - Supply2.9V~5.5V
Data Rate(Max)3.125Mbps

Introduction

AI Translation

The ST16C650A (650A) is a low power UART that can operate from 2.90V to 5.5V power supplies. Its inputs are 5V tolerant to facilitate interconnection to transceiver devices of RS - 232, RS - 422 or RS - 485. The 650A is software compatible to the industry standard 16C550 with some additional enhanced features. The 650A provides serial asynchronous receive data synchronization, parallel - to - serial data conversion for the transmitter section and serial - to - parallel data conversions for receiver section. These functions are necessary for converting the serial data stream into parallel data that is required with digital data systems. Synchronization for the serial data stream is accomplished by adding start and stop bits to the transmitted data to form a data character (character orientated protocol). Data integrity is ensured by attaching a parity bit to the data character. The parity bit is checked by the receiver for any transmission bit errors. The electronic circuitry to provide all these functions is fairly complex especially when manufactured on a single integrated silicon chip. The ST16C650A represents such an integration with greatly enhanced features. The 650A is fabricated with an advanced CMOS process. The 650A supports standard 8 - bit Intel or PC bus interfaces through an input selection pin (SEL input pin). The Intel bus uses the standard read and write signals for all bus transactions. The PC bus mode associates with the PC ISA bus and follow the industry standard PC definitions for COM 1 - 4 serial port addresses. The 650A includes on - board chip select decode logic and selection for the proper interrupt request. This eliminates the need for an external logic array device. The 650A has 32 - bytes each of transmit and receive FIFOs, automatic RTS/CTS hardware flow control with hysteresis, automatic Xon/Xoff and special character software flow control, selectable transmit and receive FIFO trigger levels, wireless infrared encoder and decoder (IrDA ver. 1.0), programmable baud rate generator with a prescaler of divide by 1 or 4, and data rates up to 3.125 Mbps with a 16X sampling clock rate. The 650A is an upward solution that provides 32 bytes of transmit and receive FIFO memory, instead of 16 bytes provided in the 16C550, or none in the 16C450. The 650A is designed to work with high speed communication devices, that require fast data processing time. Increased performance is realized in the 650A by the larger transmit and receive FIFOs. This allows the external processor to handle more networking tasks within a given time. For example, the standard ST16C550 with a 16 byte FIFO, unloads 16 bytes of receive data in 1.53 ms (This example uses a character length of 11 bits, including start/stop bits at 115.2Kbps). This means the external CPU will have to service the receive FIFO at 1.53 ms intervals. However with the 32 byte FIFO in the 650A, the data buffer will not require unloading/loading for 3.05 ms. This increases the service interval giving the external CPU additional time for other applications and reducing the overall UART interrupt servicing time. In addition, the 4 selectable levels of FIFO trigger interrupt and automatic hardware/software flow control is uniquely provided for maximum data throughput performance especially when operating in a multi - channel environment. The combination of the above greatly reduces the bandwidth requirement of the external controlling CPU, increases performance, and reduces power consumption. The rich feature set of the 650A is available through internal registers. Automatic hardware/software flow control, selectable transmit and receive FIFO trigger levels, selectable TX and RX baud rates, infrared encoder/decoder interface, modem interface controls, and a sleep mode are all standard.

Features

AI Translation
  • Added features in devices with a top mark date code of "HC YYWW" and newer:
    • 2.90 to 5.5 Volt Operation
    • 5 Volt Tolerant Inputs
    • Automatic RS485 Half - Duplex Control Output
    • Programmable Infrared Encoder Pulse Width
    • Sleep Mode with Wake - up Indicator
    • Device ID & Revision
    • Up to 3.125 Mbps Data Rate at 5 Volts
  • Added feature in devices with a top mark date code of "I2 YYWW" and newer:
    • Intel or PC Mode 8 - bit Bus Interface
    • 32 - byte Transmit and Receive FIFOs
    • Automatic Hardware (RTS/CTS) Flow Control
    • Hardware Flow Control Hysteresis
    • Automatic Software (Xon/Xoff) Flow Control

Applications

AI Translation
  • Battery Operated Electronics
  • Handheld Terminal
  • Personal Digital Assistants
  • Cellular Phones DataPort
  • Wireless Infrared Data Communications Systems