ST VND600PEP-E
| Manufacturer | |
| MPN | VND600PEP-E |
| LCSC Part # | C1556798 |
| Packaging | PowerSSO-24 |
| Customer # | |
| Key Attributes | 2 25A Active High High Side Switch PowerSSO-24 Power Distribution Switches, Load Drivers |
| Datasheet | ST VND600PEP-E |
| Alternative Parts | 4 |
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | ST | |
| Packaging | PowerSSO-24 | |
| Operating Temperature | -40℃~+150℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse voltage protection | |
| number of channels | 2 | |
| Maximum Continuous Current | 25A | |
| Control Input Logic | Active High | |
| RDS(on) | 30mΩ | |
| Operating Voltage | 5.5V~36V | |
| Type | High Side Switch |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | ST | |
| Packaging | PowerSSO-24 | |
| Operating Temperature | -40℃~+150℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse voltage protection | |
| number of channels | 2 |
| Type | Description | |
|---|---|---|
| Maximum Continuous Current | 25A | |
| Control Input Logic | Active High | |
| RDS(on) | 30mΩ | |
| Operating Voltage | 5.5V~36V | |
| Type | High Side Switch |
Introduction
The VND600PEP-E is a monolithic device made using VIPower™ M0-3 technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes. This device has two channels in high side configuration; each channel has an analog sense output on which the sensing current is proportional (according to a known ratio) to the corresponding load current. Built-in thermal shutdown and outputs current limitation protect the chip from over temperature and short circuit. Device turns off in case of ground pin disconnection.
Features
- DC short circuit current: 25A
- CMOS compatible inputs
- Proportional load current sense
- Undervoltage and overvoltage shutdown
- Overvoltage clamp
- Thermal shutdown
- Current limitation
- Very low standby power dissipation
- Protection against: loss of ground and loss of VCC
- Reverse battery protection
- In compliance with the 2002/95/ec european directive
| Qty | Unit Price(Reference Only) | Total Amount |
|---|---|---|
| 1+ | $ 2.5267 | $ 2.53 |
| 200+ | $ 0.9786 | $ 195.72 |
| 500+ | $ 0.9431 | $ 471.55 |
| 1,000+ | $ 0.9261 | $ 926.10 |
Standard Packaging49/Full Tube | ||
Products Specifications
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | ST | |
| Packaging | PowerSSO-24 | |
| Operating Temperature | -40℃~+150℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse voltage protection | |
| number of channels | 2 | |
| Maximum Continuous Current | 25A | |
| Control Input Logic | Active High | |
| RDS(on) | 30mΩ | |
| Operating Voltage | 5.5V~36V | |
| Type | High Side Switch |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Power Management (PMIC)/Power Distribution Switches, Load Drivers | |
| Manufacturer | ST | |
| Packaging | PowerSSO-24 | |
| Operating Temperature | -40℃~+150℃ | |
| Features | Overcurrent Protection;Short-Circuit Protection;Over temperature protection;Overvoltage protection;Under-voltage lockout;Reverse voltage protection | |
| number of channels | 2 |
| Type | Description | |
|---|---|---|
| Maximum Continuous Current | 25A | |
| Control Input Logic | Active High | |
| RDS(on) | 30mΩ | |
| Operating Voltage | 5.5V~36V | |
| Type | High Side Switch |
Introduction
The VND600PEP-E is a monolithic device made using VIPower™ M0-3 technology. It is intended for driving resistive or inductive loads with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes. This device has two channels in high side configuration; each channel has an analog sense output on which the sensing current is proportional (according to a known ratio) to the corresponding load current. Built-in thermal shutdown and outputs current limitation protect the chip from over temperature and short circuit. Device turns off in case of ground pin disconnection.
Features
- DC short circuit current: 25A
- CMOS compatible inputs
- Proportional load current sense
- Undervoltage and overvoltage shutdown
- Overvoltage clamp
- Thermal shutdown
- Current limitation
- Very low standby power dissipation
- Protection against: loss of ground and loss of VCC
- Reverse battery protection
- In compliance with the 2002/95/ec european directive
C1556798 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| ECCN | EAR99 |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |
| Type | Details |
|---|---|
| ECCN | EAR99 |
| CNHTS | 8536500090 |
| USHTS | 8536507000 |
| TARIC | 8536500300 |
| Type | Details |
|---|---|
| CAHTS | 8536501000 |
| BRHTS | 85365090 |
| INHTS | 85365090 |
| MXHTS | 8536.50.09 |
Alternative Parts
| MPN | Manufacturer | Alternative Type | Packaging | Availability | Unit Price | ||
|---|---|---|---|---|---|---|---|
| VND5025AKTR-E | ST | Similar | PowerSSO-24 | 5 | $ 4.0795 | ||
| VND5025AK-E | ST | Similar | PowerSSO-24 | 0 | $ 8.4445 | ||
| VND5012AKTR-E | ST | Similar | PowerSSO-24 | 0 | $ 10.3574 | ||
| VND5012AK-E | ST | Similar | PowerSSO-24 | 0 | $ 6.9109 |