NXP MC9S08GT16ACFDE
| Manufacturer | |
| MPN | MC9S08GT16ACFDE |
| LCSC Part # | C1337992 |
| Packaging | QFN-48-EP(7x7) |
| Customer # | |
| Key Attributes | S08 8 Bit 40MHz QFN-48-EP(7x7) Microcontrollers RoHS |
| Datasheet | NXP MC9S08GT16ACFDE |
| RoHS Compliance | 2 documents available |
| Alternative Parts | 4 |
Products Specifications
All
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Manufacturer | NXP | |
| Packaging | QFN-48-EP(7x7) | |
| ADC (Bit) | 10bit | |
| Number of I/O | 39 | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage - Supply | 1.8V~3.6V | |
| Program Memory Type | FLASH | |
| EEPROM | - | |
| Program Storage Size | 16KB | |
| CPU Core | S08 | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 40MHz | |
| Oscillator Type | Built-in |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Manufacturer | NXP | |
| Packaging | QFN-48-EP(7x7) | |
| ADC (Bit) | 10bit | |
| Number of I/O | 39 | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage - Supply | 1.8V~3.6V |
| Type | Description | |
|---|---|---|
| Program Memory Type | FLASH | |
| EEPROM | - | |
| Program Storage Size | 16KB | |
| CPU Core | S08 | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 40MHz | |
| Oscillator Type | Built-in |
Help & FeedbackShow similar products (0) >
Features
AI Translation
- 40-MHz HCS08 CPU HC08 instruction set with added BGND instruction
- Support for up to 32 interrupt/reset sources
- FLASH read/program/erase down to 1.8 V
- Up to 16K FLASH; up to 2K RAM
- Three very low power stop modes
- Reduced power wait mode
- Very low power real time interrupt for use in run, wait, and stop
- Clock sources to internal hardware frequency locked-loop (FLL): internal, external, crystal, or resonator
- Internal clock with ±0.2% trimming resolution and ±0.5% deviation across voltage or across temperature
- Optional watchdog computer operating properly (COP) reset
- Low-voltage detection with reset or interrupt
- Illegal opcode detection with reset
- Illegal address detection with reset
- FLASH block protect and security
- ATD — 8-channel, 10-bit analog-to-digital converter
- SCI — Two serial communications interface modules
- SPI — Serial peripheral interface module
- IIC — Inter-integrated circuit bus module
- Timer — One 3-channel timer PWM module (TPM) plus one 2-channel TPM
- KBI — 8-pin keyboard interrupt module
- 8 high-current pins (20 mA each)
- Software selectable pullups on ports when used as input
- Internal pullup on RESET and IRQ pin to reduce customer system cost
- Up to 38 general-purpose input/output (I/O) pins, plus one output-only pin, depending on package selection
- Background debugging system
- Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module)
- On-chip, in-circuit emulation (ICE) debug module with real-time bus capture. On-chip ICE debug module containing two comparators and nine trigger modes. Eight deep FIFO for storing change-of-flow addresses and event-only data.
- Single-wire background debug interface
- 48-pin QFN • 44-pin QFP 42-pin PSDIP 32-pin QFN
In-Stock: 23
23 In stock, ships now
Minimum: 1Multiple: 1Sales Unit: Piece
Add to BOM List
| Qty | Unit Price | Total Amount |
|---|---|---|
| 1+ | $ 12.1469 | $ 12.15 |
| 10+ | $ 11.5668 | $ 115.67 |
| 30+ | $ 10.5605 | $ 316.82 |
| 100+ | $ 9.6821 | $ 968.21 |
Standard Packaging1300/Full Tray | ||
Better price for more quantity?
$
Products Specifications
All
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Manufacturer | NXP | |
| Packaging | QFN-48-EP(7x7) | |
| ADC (Bit) | 10bit | |
| Number of I/O | 39 | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage - Supply | 1.8V~3.6V | |
| Program Memory Type | FLASH | |
| EEPROM | - | |
| Program Storage Size | 16KB | |
| CPU Core | S08 | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 40MHz | |
| Oscillator Type | Built-in |
| Type | Description | |
|---|---|---|
| Category | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Manufacturer | NXP | |
| Packaging | QFN-48-EP(7x7) | |
| ADC (Bit) | 10bit | |
| Number of I/O | 39 | |
| Operating Temperature | -40℃~+85℃ | |
| Voltage - Supply | 1.8V~3.6V |
| Type | Description | |
|---|---|---|
| Program Memory Type | FLASH | |
| EEPROM | - | |
| Program Storage Size | 16KB | |
| CPU Core | S08 | |
| Core Size | 8 Bit | |
| CPU Maximum Speed | 40MHz | |
| Oscillator Type | Built-in |
Help & FeedbackShow similar products (0) >
Features
AI Translation
- 40-MHz HCS08 CPU HC08 instruction set with added BGND instruction
- Support for up to 32 interrupt/reset sources
- FLASH read/program/erase down to 1.8 V
- Up to 16K FLASH; up to 2K RAM
- Three very low power stop modes
- Reduced power wait mode
- Very low power real time interrupt for use in run, wait, and stop
- Clock sources to internal hardware frequency locked-loop (FLL): internal, external, crystal, or resonator
- Internal clock with ±0.2% trimming resolution and ±0.5% deviation across voltage or across temperature
- Optional watchdog computer operating properly (COP) reset
- Low-voltage detection with reset or interrupt
- Illegal opcode detection with reset
- Illegal address detection with reset
- FLASH block protect and security
- ATD — 8-channel, 10-bit analog-to-digital converter
- SCI — Two serial communications interface modules
- SPI — Serial peripheral interface module
- IIC — Inter-integrated circuit bus module
- Timer — One 3-channel timer PWM module (TPM) plus one 2-channel TPM
- KBI — 8-pin keyboard interrupt module
- 8 high-current pins (20 mA each)
- Software selectable pullups on ports when used as input
- Internal pullup on RESET and IRQ pin to reduce customer system cost
- Up to 38 general-purpose input/output (I/O) pins, plus one output-only pin, depending on package selection
- Background debugging system
- Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module)
- On-chip, in-circuit emulation (ICE) debug module with real-time bus capture. On-chip ICE debug module containing two comparators and nine trigger modes. Eight deep FIFO for storing change-of-flow addresses and event-only data.
- Single-wire background debug interface
- 48-pin QFN • 44-pin QFP 42-pin PSDIP 32-pin QFN
C1337992 EasyEDA Library
Compliance & Export Codes
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Type | Details |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC |
| Type | Details |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS | |
Alternative Parts
| MPN | Manufacturer | Packaging | Availability | Unit Price | ||
|---|---|---|---|---|---|---|
| MC9S08GT16ACFDER | NXP | QFN-48-EP(7x7) | 0 | $ 7.2006 | ||
| MC9S08GT32ACFDE | NXP | QFN-48-EP(7x7) | 0 | $ 12.9579 | ||
| MC9S08GT16CFD-MO | MOTOROLA | QFN-48-EP(7x7) | 0 | $ 5.4545 | ||
| S9S08DZ32F2MLF | NXP | UFQFPN-48(7x7) | 0 | $ 10.4568 |

