LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
MICROCHIP dsPIC33FJ16GP102-I/SP product image
Abbildung ähnlich

MICROCHIP dsPIC33FJ16GP102-I/SP

Hersteller
Herst.-Teilenr.
dsPIC33FJ16GP102-I/SP
LCSC-Nr.
C647322
Verp.
SPDIP-28-300mil
Kundennummer
Hauptmerkm.
64MHz SPDIP-28-300mil Microcontrollers RoHS
DatenblattMICROCHIP dsPIC33FJ16GP102-I/SP
RoHS-Konformität2 Dokumente verfügbar
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 7.8779$ 7.88
200+$ 3.0499$ 609.98
500+$ 2.9419$ 1470.95
1,000+$ 2.8894$ 2889.40
Standardgehäuse15/Full Tube
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Embedded/Microcontrollers
HerstellerMICROCHIP
Verp.SPDIP-28-300mil
Operating Temperature-40℃~+85℃
Clock Rate64MHz

Merkmale

KI-Übersetzung
  • Code-Efficient (C and Assembly) Architecture
  • Two 40-Bit Wide Accumulators
  • Single-Cycle (MAC/MPY) with Dual Data Fetch
  • Single-Cycle Mixed-Sign MUL plus Hardware Divide
  • 32-Bit Multiply Support
  • ±0.25% Internal Oscillator
  • Programmable PLLs and Oscillator Clock Sources
  • Fail-Safe Clock Monitor (FSCM)
  • Independent Watchdog Timer (WDT)
  • Fast Wake-up and Start-up
  • Low-Power Management modes (Sleep, Idle, Doze)
  • Integrated Power-on Reset and Brown-out Reset
  • 1 mA/MHz Dynamic Current (typical)
  • 30 μA IPD Current (typical)
  • Up to Three PWM Pairs
  • Two Dead-Time Generators
  • 31.25 ns PWM Resolution
  • PWM Support for: Inverters, PFC, UPS; BLDC, PMSM, ACIM, SRM
  • Class B-Compliant Fault Inputs
  • Possibility of ADC Synchronization with PWM Signal
  • ADC module: 10-bit, 1.1 Msps with four S&H; Four analog inputs on 18-pin devices and up to 14 analog inputs on 44-pin devices
  • Flexible and Independent ADC Trigger Sources
  • Three Comparator modules
  • Charge Time Measurement Unit (CTMU): Supports mTouch capacitive touch sensing; Provides high-resolution time measurement (1 ns); On-chip temperature measurement
  • Up to Five General Purpose Timers: One 16-bit and up to two 32-bit timers/counters
  • Two Output Compare modules
  • Three Input Capture modules
  • Peripheral Pin Select (PPS) to allow Function Remap
  • UART module (4 Mbps): With support for LIN/J2602 Protocols and IrDA
  • 4-Wire SPI module (8 MHz maximum speed): Remappable pins in 32-Kbyte Flash devices
  • I²C module (400 kHz)
  • Sink/Source 10 mA or 6 mA, Pin-Specific for Standard VOH/VOL, up to 16 mA or 12 mA for Non-Standard VOH1
  • 5V Tolerant Pins
  • Up to 20 Selectable Open-Drain and Pull-ups
  • Three External Interrupts (two are remappable)
  • AEC-Q100 REV G (Grade -40°C to +150°C)
  • Class B Safety Library, IEC 60730, UDE Certified
  • In-Circuit and In-Application Programming
  • Up to Three Complex Data Breakpoints
  • Trace and Run-Time Watch

Anwendungen

KI-Übersetzung
  • Inverters
  • PFC
  • UPS
  • BLDC
  • PMSM
  • ACIM
  • SRM