Immagini a scopo illustrativo
Modelli EDAEasyEDA
NXP KC9S08GT60ACFDE
| Produttore | |
| Cod. Prod. | KC9S08GT60ACFDE |
| Cod. LCSC | C20010671 |
| Imballo | - |
| Numero Cliente | |
| Attr. chiave | Microcontrollers |
| Scheda Tecnica | NXP KC9S08GT60ACFDE |
Specifiche del Prodotto
Tutto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Produttore | NXP | |
| Imballo | - |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Produttore | NXP |
| Tipo | Descrizione | |
|---|---|---|
| Imballo | - |
Aiuto & FeedbackMostra prodotti simili (0) >
Caratteristiche
Traduzione AI
- 40-MHz HCS08 CPU HC08 instruction set with added BGND instruction
- Support for up to 32 interrupt/reset sources
- FLASH read/program/erase down to 1.8 V
- Up to 16K FLASH; up to 2K RAM
- Three very low power stop modes
- Reduced power wait mode
- Very low power real time interrupt for use in run, wait, and stop
- Clock sources to internal hardware frequency locked-loop (FLL): internal, external, crystal, or resonator
- Internal clock with ±0.2% trimming resolution and ±0.5% deviation across voltage or across temperature
- Optional watchdog computer operating properly (COP) reset
- Low-voltage detection with reset or interrupt
- Illegal opcode detection with reset
- Illegal address detection with reset
- FLASH block protect and security
- ATD — 8-channel, 10-bit analog-to-digital converter
- SCI — Two serial communications interface modules
- SPI — Serial peripheral interface module
- IIC — Inter-integrated circuit bus module
- Timer — One 3-channel timer PWM module (TPM) plus one 2-channel TPM
- KBI — 8-pin keyboard interrupt module
- Software selectable pullups on ports when used as input
- Internal pullup on RESET and IRQ pin to reduce customer system cost
- Up to 38 general-purpose input/output (I/O) pins, plus one output-only pin, depending on package selection
- Background debugging system
- Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module)
- On-chip, in-circuit emulation (ICE) debug module with real-time bus capture. On-chip ICE debug module containing two comparators and nine trigger modes. Eight deep FIFO for storing change-of-flow addresses and event-only data.
- Single-wire background debug interface
- 48-pin QFN • 44-pin QFP 42-pin PSDIP 32-pin QFN
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
| Qtà | Pr. unit.(Solo per riferimento) | Importo totale |
|---|---|---|
| 1+ | $ 27.824 | $ 27.82 |
| 196+ | $ 11.1028 | $ 2176.15 |
| 504+ | $ 10.731 | $ 5408.42 |
| 1,008+ | $ 10.549 | $ 10633.39 |
Package Standard28/Full Bag | ||
Prezzo migliore per quantità maggiore?
$
Specifiche del Prodotto
Tutto
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Produttore | NXP | |
| Imballo | - |
| Tipo | Descrizione | |
|---|---|---|
| Categoria | Integrated Circuits (ICs)/Embedded/Microcontrollers | |
| Produttore | NXP |
| Tipo | Descrizione | |
|---|---|---|
| Imballo | - |
Aiuto & FeedbackMostra prodotti simili (0) >
Caratteristiche
Traduzione AI
- 40-MHz HCS08 CPU HC08 instruction set with added BGND instruction
- Support for up to 32 interrupt/reset sources
- FLASH read/program/erase down to 1.8 V
- Up to 16K FLASH; up to 2K RAM
- Three very low power stop modes
- Reduced power wait mode
- Very low power real time interrupt for use in run, wait, and stop
- Clock sources to internal hardware frequency locked-loop (FLL): internal, external, crystal, or resonator
- Internal clock with ±0.2% trimming resolution and ±0.5% deviation across voltage or across temperature
- Optional watchdog computer operating properly (COP) reset
- Low-voltage detection with reset or interrupt
- Illegal opcode detection with reset
- Illegal address detection with reset
- FLASH block protect and security
- ATD — 8-channel, 10-bit analog-to-digital converter
- SCI — Two serial communications interface modules
- SPI — Serial peripheral interface module
- IIC — Inter-integrated circuit bus module
- Timer — One 3-channel timer PWM module (TPM) plus one 2-channel TPM
- KBI — 8-pin keyboard interrupt module
- Software selectable pullups on ports when used as input
- Internal pullup on RESET and IRQ pin to reduce customer system cost
- Up to 38 general-purpose input/output (I/O) pins, plus one output-only pin, depending on package selection
- Background debugging system
- Breakpoint capability to allow single breakpoint setting during in-circuit debugging (plus two more breakpoints in on-chip debug module)
- On-chip, in-circuit emulation (ICE) debug module with real-time bus capture. On-chip ICE debug module containing two comparators and nine trigger modes. Eight deep FIFO for storing change-of-flow addresses and event-only data.
- Single-wire background debug interface
- 48-pin QFN • 44-pin QFP 42-pin PSDIP 32-pin QFN
Conformità & Codici di Esportazione
| Tipo | Dettagli |
|---|---|
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC | |
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |
| Tipo | Dettagli |
|---|---|
| ECCN | 3A991A2 |
| CNHTS | 8542319090 |
| USHTS | |
| TARIC |
| Tipo | Dettagli |
|---|---|
| CAHTS | |
| BRHTS | |
| INHTS | |
| MXHTS |