LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
MICROCHIP AT25256AN-10SU-2.7 product image
Immagini a scopo illustrativo

MICROCHIP AT25256AN-10SU-2.7

Produttore
Cod. Prod.
AT25256AN-10SU-2.7
Cod. LCSC
C19390772
Imballo
SOIC-8
Numero Cliente
Attr. chiave
131,072-bit Serial EEPROM
Scheda TecnicaMICROCHIP AT25256AN-10SU-2.7
Parti alternative11
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 3.492$ 3.49
200+$ 1.3937$ 278.74
500+$ 1.3476$ 673.80
1,000+$ 1.3238$ 1323.80
Package Standard100/Full Bag
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Memory/Memory
ProduttoreMICROCHIP
ImballoSOIC-8
Operating Temperature-40℃~+85℃
FeaturesHardware write protection function;Built-in write enable latch (WEL)
Memory Size256Kbit
Voltage - Supply2.7V~5.5V
Clock Frequency20MHz
Access Time-
Data Retention - TDR (Year)100 Years
Current - Supply9mA
Write Cycle Time(tWC)5ms
Standby Supply Current2uA
InterfaceSPI
Write Cycle Endurance1,000,000 cycles

Descrizione

Traduzione AI

The AT25128A/256A provides 131,072/262,144 bits of serial electrically-erasable programmable read only memory (EEPROM) organized as 16,384/32,768 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The devices are available in space saving 8-lead PDIP, 8-lead EIAJ SOIC, 8-lead JEDEC SOIC, 8-lead TSSOP, 8-ball dBGA2 and 8-lead SAP packages. In addition, the entire family is available in 2.7V (2.7V to 5.5V) and 1.8V (1.8V to 5.5V) versions. The AT25128A/256A is enabled through the Chip Select pin (CS) and accessed via a 3-wire interface consisting of Serial Data Input (SI), Serial Data Output (SO), and Serial Clock (SCK). All programming cycles are completely self-timed, and no separate Erase cycle is required before Write. Block Write protection is enabled by programming the status register with top %, top % or entire array of write protection. Separate Program Enable and Program Disable instructions are provided for additional data protection. Hardware data protection is provided via the WP (overline) pin to protect against inadvertent write attempts to the status register. The HOLD pin may be used to suspend any serial communication without resetting the serial sequence.

Caratteristiche

Traduzione AI
  • Serial Peripheral Interface (SPI) Compatible
  • Supports SPI Modes 0 (0,0) and 3 (1,1)
  • Data Sheet Describes Mode 0 Operation
  • Low-voltage and Standard-voltage Operation – 2.7 (VCC = 2.7V to 5.5V) – 1.8 (VCC = 1.8V to 5.5V)
  • 20 MHz Clock Rate (5V)
  • 64-byte Page Mode and Byte Write Operation
  • Block Write Protection – Protect 1/4, 1/2, or Entire Array
  • Write Protect (WP (overline)) Pin and Write Disable Instructions for Both Hardware and Software Data Protection
  • Self-timed Write Cycle (5 ms Max)
  • High-reliability – Endurance: 1 Million Write Cycles – Data Retention: > ±∞ Years
  • 8-lead PDIP, 8-lead EIAJ SOIC, 8-lead JEDEC SOIC, 8-lead TSSOP, 8-ball lead Ultra Thin SAP Packages
  • Lead-free/Halogen-free
  • Available in Automotive
  • Die Sales: Wafer Form, Waffle Pack, and Bumped Die

Parti alternative

MPNProduttoreImballaggioDisponibilitàPrezzo unitario
AT25256B-SSHL-BMICROCHIPSOIC-838$ 1.3363
BR25G256FJ-3GE2ROHMSOIC-817$ 0.7591
AT25256B-SSHL-TMICROCHIPSOIC-85,799$ 0.7113
CAT25256VI-GT3onsemiSOIC-88,877$ 1.0797
AT25256B-SSPDGV-TMICROCHIPSOIC-8-150mil0$ 2.5705
AT25256AN-10SU-1.8MICROCHIPSOIC-80$ 3.3818
AT25256AW-10SI-2.7MICROCHIPSOIC-80$ 3.4334
AT25256AW-10SU-1.8MICROCHIPSOIC-80$ 3.7714
AT25256AW-10SI-1.8MICROCHIPSOIC-80$ 3.4789
BR25S256FJ-WE2ROHMSOIC-80$ 1.356
CAT25256VI-GonsemiSOIC-80$ 1.411