NXP MK24FN1M0VDC12

The K24 product family members are optimized for cost-sensitive applications requiring low-power, USB connectivity, and up to 256 KB of embedded SRAM. These devices share the comprehensive enablement and scalability of the Kinetis family.

• Run power consumption down to 250 μA/MHz
• Static power consumption down to 5.8 μA with full state retention and 5 μs wakeup
• Lowest Static mode down to 339 nA
• USB LS/FS OTG 2.0 with embedded 3.3 V, 120 mA LDO Vreg, with USB device crystal-less operation
• Up to 120 MHz ARM Cortex-M4 core with DSP instructions and floating point unit
• Up to 1 MB program flash memory and 256 KB RAM
• FlexBus external bus interface
• USB full-/low-speed On-the-Go controller
• Controller Area Network (CAN) module
• Three SPI modules
• Three I2C modules. Support for up to 1 Mbit/s
• Six UART modules
• Secure Digital Host Controller (SDHC)
• I2S module
• Multiple low-power modes, low-leakage wake-up unit
• Memory protection unit with multi-master protection
• 16-channel DMA controller
• External watchdog monitor and software watchdog
• Hardware CRC module
• Hardware random-number generator
• Hardware encryption supporting DES, 3DES, AES, MD5, SHA-1, and SHA-256 algorithms
• 128-bit unique identification (ID) number per chip
• Two 8-channel Flex-Timers (PWM/Motor control)
• Two 2-channel FlexTimers (PWM/Quad decoder)
• 32-bit PITs and 16-bit low-power timers
• Real-time clock
• Programmable delay block
• Two 16-bit SAR ADCs
• Two 12-bit DACs
• Three analog comparators (CMP)
• Voltage reference
• 3 to 32 MHz and 32 kHz crystal oscillator
• PLL, FLL, and multiple internal oscillators
• 48 MHz Internal Reference Clock (IRC48M)
• Voltage range: 1.71 to 3.6 V
• Flash write voltage range: 1.71 to 3.6 V
• Temperature range (ambient): -40 to 105 ℃