LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
ADI LTC3816IFE#PBF product image
Immagini a scopo illustrativo

ADI LTC3816IFE#PBF

Produttore
ADI
Cod. Prod.
LTC3816IFE#PBF
Cod. LCSC
C686156
Imballo
TSSOP-38-EP-4.4mm
Numero Cliente
Attr. chiave
150kHz~550kHz Step-down type Adjustable 4.5V~36V TSSOP-38-EP-4.4mm Special Purpose Regulators RoHS
Scheda TecnicaADI LTC3816IFE#PBF
Conformità RoHS1 documenti disponibili
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 5.178$ 5.18
10+$ 4.4346$ 44.35
30+$ 3.9919$ 119.76
100+$ 3.5446$ 354.46
500+$ 3.3379$ 1668.95
1,000+$ 3.2454$ 3245.40
Package Standard50/Full Tube
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Power Management (PMIC)/Special Purpose Regulators
ProduttoreADI
ImballoTSSOP-38-EP-4.4mm
Synchronous RectifierYes
Frequency - Switching150kHz~550kHz
FeaturesCycle-by-cycle current limiting;Adjustable current limiting;Adjustable soft-start;Built-in LDO regulator;Overcurrent Protection;Output voltage differential sensing;Frequency synchronization;Operating status indication;Light load efficient mode
FunctionStep-down type
Number of Outputs1
Output Voltage13mV~1.5V
Output Current-
Output TypeAdjustable
TopologyBuck
Quiescent Current-
Switch tube (built-in/external)External
Voltage - Supply4.5V~36V
Operating Temperature-40℃~+125℃
Aiuto & FeedbackMostra prodotti simili (0) >

Descrizione

Traduzione AI

The LTC3816 is a single-phase synchronous step-down DC/DC switching regulator controller that drives N-channel power MOSFETs in a constant-frequency voltage mode architecture. The controller’s leading edge modulation topology allows extremely low output voltages and supports a phase-lockable switching frequency up to 550kHz. The output voltage is programmed using a 7-bit VID code. The LTC3816 features all of the IMVP-6/IMVP-6.5 requirements, including start-up to a preset boot voltage, differential remote output voltage sensing with programmable active voltage positioning, IMON output current reporting, power optimization during sleep state, and fast or slow slew rate sleep state exit. Fault protection features include input undervoltage lockout, cycle-by-cycle current limit, output overvoltage protection, and PWRGD and overtemperature flags.

Caratteristiche

Traduzione AI
  • Supports 7-Bit IMVP-6/IMVP-6.5 VID Code and Features
  • Wide VIN Range: 4.5V to 36V Operation with Optional Line Feedforward Compensation
  • tON(MIN) <35ns, Capable of Very Low Duty Cycle
  • Temperature Compensated Inductor DCR or Sense Resistor Output Current Monitoring
  • Differential Remote Output Voltage Sensing with Programmable Active Voltage Positioning
  • Phase-Lockable Fixed Frequency: 150kHz to 550kHz
  • Programmable UVLO, Preset VOUT at Boot-Up
  • Programmable Slow Slew Rate Sleep State Exit
  • Internal LDO for Single Supply Operation
  • Overvoltage and Overcurrent Protection
  • PWRGD and VRTT# Thermal Throttling Flags
  • Power Optimization During Sleep and Light Load
  • 38-Pin Thermally Enhanced eTSSOP and 5mm×7mm QFN Packages

Applicazioni

Traduzione AI
  • Embedded Computing
  • Mobile Computers, Internet Devices
  • Navigation Displays