ADI LTC2871CFE#PBF

The LTC2870/LTC2871 are robust pin-configurable multiprotocol transceivers, supporting RS232, RS485, and RS422 protocols, operating on a single 3V to 5.5V supply. The LTC2870 can be configured as two RS232 single - ended transceivers or one RS485 differential transceiver on shared I/O lines. The LTC2871 offers independent control of two RS232 transceivers and one RS485 transceiver, each on dedicated I/O lines. Pin - controlled integrated termination resistors allow for easy interface reconfiguration, eliminating external resistors and control relays. Half - duplex switches allow four - wire and two - wire RS485 configurations. Loopback mode steers the driver inputs to the receiver outputs for diagnostic self - test. The RS485 receivers support up to 256 nodes per bus, and feature full failsafe operation for floating, shorted or terminated inputs. An integrated DC/DC boost converter uses a tiny 2mm × 1.6mm inductor and one capacitor, eliminating the need for multiple supplies for driving RS232 levels.

• One RS485 and Two RS232 Transceivers
• 3V to 5.5V Supply Voltage
• 20Mbps RS485 and 500kbps RS232
• Automatic Selection of Integrated RS485 (120Ω) and RS232 (5kΩ) Termination Resistors
• Half - /Full - Duplex RS485 Switching
• High ESD: ±26kV (LTC2870), ±16kV (LTC2871)
• Logic Loopback Mode
• 1.7V to 5.5V Logic Interface
• Supports Up to 256 RS485 Nodes
• RS485 Receiver Failsafe Eliminates UART Lockup
• H - Grade Available for the LTC2870 (-40°C to 125°C)

• Software Selectable RS232/RS485/RS422 Interface
• Point - of - Sale Terminals
• Cable Repeaters
• Protocol Translators