LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
ADI LT1793IS8#TRPBF product image
Immagini a scopo illustrativo

ADI LT1793IS8#TRPBF

Produttore
ADI
Cod. Prod.
LT1793IS8#TRPBF
Cod. LCSC
C665305
Imballo
SO-8
Numero Cliente
Attr. chiave
1 250uV 3.4V/us 96dB 4pA 4.2MHz SO-8 Instrumentation, Op Amps, Buffer Amps RoHS
Scheda TecnicaADI LT1793IS8#TRPBF
Conformità RoHS1 documenti disponibili
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 5.2747$ 5.27
200+$ 2.0425$ 408.50
500+$ 1.9699$ 984.95
1,000+$ 1.9344$ 1934.40
Package Standard2500/Full Reel
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaIntegrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps
ProduttoreADI
ImballoSO-8
Output Current-
Number of Channels1
Vos - Input Offset Voltage250uV
Slew Rate3.4V/us
Input Offset Current(Ios)2.5pA
Operating Temperature-40℃~+85℃
Common Mode Rejection Ratio(CMRR)96dB
Ib - Input Bias Current4pA
Input Offset Voltage Drift(Vos TC)8uV/℃
Quiescent Current-
Gain Bandwidth Product4.2MHz
FeaturesHigh capacitive load driving
Input Voltage Noise Density6nV/√Hz@1kHz
Dual Supply-
Rail to Rail-
Single Supply-
Aiuto & FeedbackMostra prodotti simili (0) >

Descrizione

Traduzione AI

The LT1793 achieves a new standard of excellence in noise performance for a JFET op amp. For the first time low voltage noise (6nV/√Hz) is simultaneously offered with extremely low current noise (0.8fA/√Hz), providing the lowest total noise for high impedance transducer applications. Unlike most JFET op amps, the very low input bias current (3pA typ) is maintained over the entire common mode range which results in an extremely high input resistance (10^13Ω). When combined with a very low input capacitance (1.5pF) an extremely high input impedance results, making the LT1793 the first choice for amplifying low level signals from high impedance transducers. The low input capacitance also assures high gain linearity when buffering AC signals from high impedance transducers. The LT1793 is unconditionally stable for gains of 1 or more, even with 1000pF capacitive loads. Other key features are 250μV and a voltage gain over 4 million. Each individual amplifier is 100% tested for voltage noise, slew rate (3.4V/μs) and gain - bandwidth product (4.2MHz). Specifications at ±5V supply operation are also provided. For an even lower voltage noise please see the LT1792 data sheet.

Caratteristiche

Traduzione AI
  • Input Bias Current, Warmed Up: 10pA Max
  • 100% Tested Low Voltage Noise: 8nV/√Hz Max
  • A Grade 100% Temperature Tested
  • Offset Voltage Over Temp: 1mV Max
  • Input Resistance: 10^13Ω
  • Very Low Input Capacitance: 1.5pF
  • Voltage Gain: 1 Million Min
  • Gain - Bandwidth Product: 4.2MHz Typ
  • Guaranteed Specifications with ±5V Supplies

Applicazioni

Traduzione AI
  • Photocurrent Amplifiers
  • Hydrophone Amplifiers
  • High Sensitivity Piezoelectric Accelerometers
  • Low Voltage and Current Noise Instrumentation
  • Amplifier Front Ends
  • Two and Three Op Amp Instrumentation Amplifiers
  • Active Filters