MICROCHIP ATSAML10E14A-UUT

Producent	MICROCHIP
Nr części prod.	ATSAML10E14A-UUT
Nr LCSC	C618356
Opak.	WLCSP-32
Numer Klienta
Klucz. cechy	ARM Cortex-M23 32 Bit 32MHz WLCSP-32 Microcontrollers
Karta Katalogowa	MICROCHIP ATSAML10E14A-UUT
Części alternatywne	5

Specyfikacje Produktu

Wszystko

Typ	Opis
Kategoria	Integrated Circuits (ICs)/Embedded/Microcontrollers
Producent	MICROCHIP
Opak.	WLCSP-32
Number of I/O	25
Operating Temperature	-40℃~+85℃
Program Memory Type	FLASH
Voltage - Supply	1.62V~3.63V
EEPROM	2KB
Program Storage Size	16KB
CPU Core	ARM Cortex-M23
Core Size	32 Bit
CPU Maximum Speed	32MHz
Oscillator Type	Built-in

Pomoc i opiniePokaż podobne produkty (0) >

Funkcje

Tłumaczenie AI

Operating Conditions: 1.62V to 3.63V, -40°C to +125°C, DC to 32 MHz
Core: 32 MHz (2.64 CoreMark/MHz and up to 31 DMIPS) Arm Cortex -M23 with:
- Single-cycle hardware multiplier
- Hardware divider
- Nested Vector Interrupt Controller (NVIC)
- Memory Protection Unit (MPU)
- Stack Limit Checking
- TrustZone for ARMv8-M (optional)
Memory:
- 16/32/64-KB Flash
- 4/8/16-KB SRAM
- 2-KB Data Flash Write-While-Read (WWR) section for non-volatile data storage
- 256 bytes TrustRAM with physical protection features
Clock Management:
- Flexible clock distribution optimized for low power
- 32.768 kHz crystal oscillator
- 32.768 kHz ultra low-power internal RC oscillator
- 0.4 to 32 MHz crystal oscillator
- 16/12/8/4 MHz low-power internal RC oscillator
- Ultra low-power digital Frequency-Locked Loop (DFLLULP)
- 32-96 MHz fractional digital Phase-Locked Loop (FDPLL96M)
- One frequency meter
Low-Power and Power Management:
- Active, Idle, Standby with partial or full SRAM retention and off sleep modes:
  - Active mode (<25 μA/MHz)
  - Idle mode (<10 μA/MHz) with 1.5 μs wake-up time
  - Standby with Full SRAM Retention (0.5 μA) with 5.3 μs wake-up time
  - Off mode (<100 nA)
- Static and dynamic power gating architecture
- Sleepwalking peripherals
- Two performance levels
- Embedded Buck/LDO regulator with on-the-fly selection
Security:
- Up to four tamper pins for static and dynamic intrusion detections
- Data Flash:
  - Optimized for secure storage
  - Address and data scrambling with user-defined key (optional)
  - Rapid tamper erase on scrambling key and on one user-defined row
  - Silent access for data read noise reduction
TrustRAM:
- Address and data scrambling with user-defined key
- Chip-level tamper detection on physical RAM to resist microprobing attacks
- Rapid tamper erase on scrambling key and RAM data
- Silent access for data read noise reduction
- Data remanence prevention
Peripherals:
- One True Random Generator (TRNG)
- AES-128, SHA-256, and GCM cryptography accelerators (optional)
- Secure pin multiplexing to isolate on dedicated I/O pins a secured communication with external devices from the non-secure application (optional)
- TrustZone for flexible hardware isolation of memories and peripherals (optional):
  - Up to six regions for the Flash
  - Up to two regions for the Data Flash
  - Up to two regions for the SRAM
  - Individual security attribution for each peripheral, I/O, external interrupt line, and Event System Channel
- Secure Boot with SHA-based authentication (optional)
- Up to three debug access levels
- Up to three Chip Erase commands to erase part of or the entire embedded memories
- Unique 128-bit serial number
- SAM L11 Securely Key Provisioned (KPH) (optional):
  - Key Provisioning using Root of Trust flow
  - Security Software Framework using Kinibi-M Software Development Kit (SDK)
Advanced Analog and Touch:
- One 12-bit 1 Msps Analog-to-Digital Converter (ADC) with up to 10 channels
- Two Analog Comparators (AC) with window compare function
- One 10-bit 350 ksps Digital-to-Analog Converter (DAC) with external and internal outputs
- Three Operational Amplifiers (OPAMP)
- Up to 20 self-capacitance channels
- Up to 100 (10x10) mutual-capacitance channels
- Low-power, high-sensitivity, environmentally robust capacitive touch buttons, sliders, and wheels
- Hardware noise filtering and noise signal desynchronization for high conducted immunity
- Driven Shield Plus for better noise immunity and moisture tolerance
- Parallel Acquisition through Polarity control
- Supports wake-up on touch from Standby Sleep mode
Communication Interfaces:
- Up to three Serial Communication Interfaces (SERCOM) that can operate as:
  - USART with full-duplex and single-wire half-duplex configuration
  - I²C up to 3.4 Mbit/s (High-Speed mode) on one instance and up to 1 Mbit/s (Fast-mode Plus) on the second instance
  - Serial Peripheral Interface (SPI)
  - ISO7816 on one instance (Available on 32-pin packages only)
  - RS-485 on one instance (Available on 32-pin packages only)
  - LIN Client on one instance (Available on 32-pin packages only)
Timers/Output Compare/Input Capture:
- Three 16-bit Timers/Counters (TC), each configurable as:
  - One 16-bit TC with two compare/capture channels
  - One 8-bit TC with two compare/capture channels
  - One 32-bit TC with two compare/capture channels, by using two TCs
- PWM Modes using TC peripherals:
  - Up to two PWM channels on each 16-bit TC
- 32-bit Real-Time Counter (RTC) with clock/calendar functions
- Watchdog Timer (WDT) with Window mode
Input/Output (I/O):
- Up to 25 programmable I/O lines
- Eight external interrupts (EIC)
- One non-maskable interrupt (NMI)
- One Configurable Custom Logic (CCL) that supports:
  - Combinatorial logic functions, such as AND, NAND, OR, and NOR
  - Sequential logic functions, such as Flip-Flop and Latches
Qualification and Class-B Support:
- AEC-Q100 Grade 1 (-40°C to +125°C)
- Class-B safety library, IEC 60730 (future)
Debugger Development Support:
- Two-pin Serial Wire Debug (SWD) programming and debugging interface

Brak w magazynie

Powiadom mnie

Minimum: 1Wielokrotność: 1Jednostka sprzedaży: Piece

Dodaj do Listy BOM

Szt.	Cena jedn.(Tylko do wglądu)	Suma całkowita
1+	$ 5.1907	$ 5.19
200+	$ 2.0096	$ 401.92
500+	$ 1.9386	$ 969.30
1,000+	$ 1.9031	$ 1903.10
Standardowa Obudowa5000/Full Reel

Lepsza cena za większą ilość?

Specyfikacje Produktu

Wszystko

Typ	Opis
Kategoria	Integrated Circuits (ICs)/Embedded/Microcontrollers
Producent	MICROCHIP
Opak.	WLCSP-32
Number of I/O	25
Operating Temperature	-40℃~+85℃
Program Memory Type	FLASH
Voltage - Supply	1.62V~3.63V
EEPROM	2KB
Program Storage Size	16KB
CPU Core	ARM Cortex-M23
Core Size	32 Bit
CPU Maximum Speed	32MHz
Oscillator Type	Built-in

Pomoc i opiniePokaż podobne produkty (0) >

Funkcje

Tłumaczenie AI

Operating Conditions: 1.62V to 3.63V, -40°C to +125°C, DC to 32 MHz
Core: 32 MHz (2.64 CoreMark/MHz and up to 31 DMIPS) Arm Cortex -M23 with:
- Single-cycle hardware multiplier
- Hardware divider
- Nested Vector Interrupt Controller (NVIC)
- Memory Protection Unit (MPU)
- Stack Limit Checking
- TrustZone for ARMv8-M (optional)
Memory:
- 16/32/64-KB Flash
- 4/8/16-KB SRAM
- 2-KB Data Flash Write-While-Read (WWR) section for non-volatile data storage
- 256 bytes TrustRAM with physical protection features
Clock Management:
- Flexible clock distribution optimized for low power
- 32.768 kHz crystal oscillator
- 32.768 kHz ultra low-power internal RC oscillator
- 0.4 to 32 MHz crystal oscillator
- 16/12/8/4 MHz low-power internal RC oscillator
- Ultra low-power digital Frequency-Locked Loop (DFLLULP)
- 32-96 MHz fractional digital Phase-Locked Loop (FDPLL96M)
- One frequency meter
Low-Power and Power Management:
- Active, Idle, Standby with partial or full SRAM retention and off sleep modes:
  - Active mode (<25 μA/MHz)
  - Idle mode (<10 μA/MHz) with 1.5 μs wake-up time
  - Standby with Full SRAM Retention (0.5 μA) with 5.3 μs wake-up time
  - Off mode (<100 nA)
- Static and dynamic power gating architecture
- Sleepwalking peripherals
- Two performance levels
- Embedded Buck/LDO regulator with on-the-fly selection
Security:
- Up to four tamper pins for static and dynamic intrusion detections
- Data Flash:
  - Optimized for secure storage
  - Address and data scrambling with user-defined key (optional)
  - Rapid tamper erase on scrambling key and on one user-defined row
  - Silent access for data read noise reduction
TrustRAM:
- Address and data scrambling with user-defined key
- Chip-level tamper detection on physical RAM to resist microprobing attacks
- Rapid tamper erase on scrambling key and RAM data
- Silent access for data read noise reduction
- Data remanence prevention
Peripherals:
- One True Random Generator (TRNG)
- AES-128, SHA-256, and GCM cryptography accelerators (optional)
- Secure pin multiplexing to isolate on dedicated I/O pins a secured communication with external devices from the non-secure application (optional)
- TrustZone for flexible hardware isolation of memories and peripherals (optional):
  - Up to six regions for the Flash
  - Up to two regions for the Data Flash
  - Up to two regions for the SRAM
  - Individual security attribution for each peripheral, I/O, external interrupt line, and Event System Channel
- Secure Boot with SHA-based authentication (optional)
- Up to three debug access levels
- Up to three Chip Erase commands to erase part of or the entire embedded memories
- Unique 128-bit serial number
- SAM L11 Securely Key Provisioned (KPH) (optional):
  - Key Provisioning using Root of Trust flow
  - Security Software Framework using Kinibi-M Software Development Kit (SDK)
Advanced Analog and Touch:
- One 12-bit 1 Msps Analog-to-Digital Converter (ADC) with up to 10 channels
- Two Analog Comparators (AC) with window compare function
- One 10-bit 350 ksps Digital-to-Analog Converter (DAC) with external and internal outputs
- Three Operational Amplifiers (OPAMP)
- Up to 20 self-capacitance channels
- Up to 100 (10x10) mutual-capacitance channels
- Low-power, high-sensitivity, environmentally robust capacitive touch buttons, sliders, and wheels
- Hardware noise filtering and noise signal desynchronization for high conducted immunity
- Driven Shield Plus for better noise immunity and moisture tolerance
- Parallel Acquisition through Polarity control
- Supports wake-up on touch from Standby Sleep mode
Communication Interfaces:
- Up to three Serial Communication Interfaces (SERCOM) that can operate as:
  - USART with full-duplex and single-wire half-duplex configuration
  - I²C up to 3.4 Mbit/s (High-Speed mode) on one instance and up to 1 Mbit/s (Fast-mode Plus) on the second instance
  - Serial Peripheral Interface (SPI)
  - ISO7816 on one instance (Available on 32-pin packages only)
  - RS-485 on one instance (Available on 32-pin packages only)
  - LIN Client on one instance (Available on 32-pin packages only)
Timers/Output Compare/Input Capture:
- Three 16-bit Timers/Counters (TC), each configurable as:
  - One 16-bit TC with two compare/capture channels
  - One 8-bit TC with two compare/capture channels
  - One 32-bit TC with two compare/capture channels, by using two TCs
- PWM Modes using TC peripherals:
  - Up to two PWM channels on each 16-bit TC
- 32-bit Real-Time Counter (RTC) with clock/calendar functions
- Watchdog Timer (WDT) with Window mode
Input/Output (I/O):
- Up to 25 programmable I/O lines
- Eight external interrupts (EIC)
- One non-maskable interrupt (NMI)
- One Configurable Custom Logic (CCL) that supports:
  - Combinatorial logic functions, such as AND, NAND, OR, and NOR
  - Sequential logic functions, such as Flip-Flop and Latches
Qualification and Class-B Support:
- AEC-Q100 Grade 1 (-40°C to +125°C)
- Class-B safety library, IEC 60730 (future)
Debugger Development Support:
- Two-pin Serial Wire Debug (SWD) programming and debugging interface

Zgodność & Kody Eksportowe

Typ	Szczegóły
ECCN	3A991A2
CNHTS	8542319090
USHTS
TARIC
CAHTS
BRHTS
INHTS
MXHTS

Typ	Szczegóły
ECCN	3A991A2
CNHTS	8542319090
USHTS
TARIC

Typ	Szczegóły
CAHTS
BRHTS
INHTS
MXHTS

Części alternatywne

MPN	Producent	Opakowanie	Cena jednostkowa
ATSAML11E14A-UUT	MICROCHIP	WLCSP-32	$ 5.7881
ATSAML10E15A-UUT	MICROCHIP	WLCSP-32	$ 5.4516
ATSAML11E15A-UUT	MICROCHIP	WLCSP-32	$ 6.0489
ATSAML10E16A-UUT	MICROCHIP	WLCSP-32	$ 5.8992
ATSAML11E16A-UUT	MICROCHIP	WLCSP-32	$ 6.4965