onsemi MUN5330DW1T1G
| 제조업체 | |
| 제조사 품번 | MUN5330DW1T1G |
| LCSC 번호 | C463100 |
| 포장 | SOT-363 |
| 고객 번호 | |
| 주요 제원 | TRANS PREBIAS NPN 50V SOT-363 |
| 데이터시트 | onsemi MUN5330DW1T1G |
| RoHS 준수 | 4개 문서 이용 가능 |
| 대체 부품 | 10 |
제품 사양
| 타입 | 설명 | |
|---|---|---|
| 카테고리 | Discrete Semiconductors/Transistors/Bipolar (BJT)/Bipolar Transistor Arrays, Pre-Biased | |
| 제조업체 | onsemi | |
| 포장 | SOT-363 | |
| Current - Collector Cutoff | 100nA | |
| Transition frequency(fT) | - | |
| Emitter-Base Voltage VEBO | - | |
| DC Current Gain | 3 | |
| Operating Temperature | - | |
| Vce Saturation(VCE(sat)) | 250mV | |
| Output Voltage(VO(on)) | - | |
| Input Resistor | 1kΩ | |
| Resistor Ratio | 1.2 | |
| Pd - Power Dissipation | 187mW | |
| Voltage - Input(Max)(VI(off)) | 1.2V | |
| Input Voltage (VI(on)@Ic,Vce) | 1.7V | |
| Current - Collector(Ic) | 100mA | |
| Collector - Emitter Voltage VCEO | 50V | |
| type | NPN+PNP | |
| Number | 1 NPN, 1 PNP Pre-Biased |
| 타입 | 설명 | |
|---|---|---|
| 카테고리 | Discrete Semiconductors/Transistors/Bipolar (BJT)/Bipolar Transistor Arrays, Pre-Biased | |
| 제조업체 | onsemi | |
| 포장 | SOT-363 | |
| Current - Collector Cutoff | 100nA | |
| Transition frequency(fT) | - | |
| Emitter-Base Voltage VEBO | - | |
| DC Current Gain | 3 | |
| Operating Temperature | - | |
| Vce Saturation(VCE(sat)) | 250mV | |
| Output Voltage(VO(on)) | - |
| 타입 | 설명 | |
|---|---|---|
| Input Resistor | 1kΩ | |
| Resistor Ratio | 1.2 | |
| Pd - Power Dissipation | 187mW | |
| Voltage - Input(Max)(VI(off)) | 1.2V | |
| Input Voltage (VI(on)@Ic,Vce) | 1.7V | |
| Current - Collector(Ic) | 100mA | |
| Collector - Emitter Voltage VCEO | 50V | |
| type | NPN+PNP | |
| Number | 1 NPN, 1 PNP Pre-Biased |
개요
This series of digital transistors is designed to replace a single device and its external resistor bias network. The Bias Resistor Transistor (BRT) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base - emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space.
주요 특징
- Simplifies Circuit Design
- Reduces Board Space
- Reduces Component Count
- S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable
- These Devices are Pb - Free, Halogen Free/BFR Free and are RoHS Compliant
| 수량 | 단가 | 총액 |
|---|---|---|
| 10+ | $ 0.086 | $ 0.86 |
| 100+ | $ 0.0751 | $ 7.51 |
| 300+ | $ 0.0697 | $ 20.91 |
| 3,000+ | $ 0.0656 | $ 196.80 |
| 6,000+ | $ 0.0623 | $ 373.80 |
| 9,000+ | $ 0.0606 | $ 545.40 |
표준 패키지3000/Full Reel | ||
제품 사양
| 타입 | 설명 | |
|---|---|---|
| 카테고리 | Discrete Semiconductors/Transistors/Bipolar (BJT)/Bipolar Transistor Arrays, Pre-Biased | |
| 제조업체 | onsemi | |
| 포장 | SOT-363 | |
| Current - Collector Cutoff | 100nA | |
| Transition frequency(fT) | - | |
| Emitter-Base Voltage VEBO | - | |
| DC Current Gain | 3 | |
| Operating Temperature | - | |
| Vce Saturation(VCE(sat)) | 250mV | |
| Output Voltage(VO(on)) | - | |
| Input Resistor | 1kΩ | |
| Resistor Ratio | 1.2 | |
| Pd - Power Dissipation | 187mW | |
| Voltage - Input(Max)(VI(off)) | 1.2V | |
| Input Voltage (VI(on)@Ic,Vce) | 1.7V | |
| Current - Collector(Ic) | 100mA | |
| Collector - Emitter Voltage VCEO | 50V | |
| type | NPN+PNP | |
| Number | 1 NPN, 1 PNP Pre-Biased |
| 타입 | 설명 | |
|---|---|---|
| 카테고리 | Discrete Semiconductors/Transistors/Bipolar (BJT)/Bipolar Transistor Arrays, Pre-Biased | |
| 제조업체 | onsemi | |
| 포장 | SOT-363 | |
| Current - Collector Cutoff | 100nA | |
| Transition frequency(fT) | - | |
| Emitter-Base Voltage VEBO | - | |
| DC Current Gain | 3 | |
| Operating Temperature | - | |
| Vce Saturation(VCE(sat)) | 250mV | |
| Output Voltage(VO(on)) | - |
| 타입 | 설명 | |
|---|---|---|
| Input Resistor | 1kΩ | |
| Resistor Ratio | 1.2 | |
| Pd - Power Dissipation | 187mW | |
| Voltage - Input(Max)(VI(off)) | 1.2V | |
| Input Voltage (VI(on)@Ic,Vce) | 1.7V | |
| Current - Collector(Ic) | 100mA | |
| Collector - Emitter Voltage VCEO | 50V | |
| type | NPN+PNP | |
| Number | 1 NPN, 1 PNP Pre-Biased |
개요
This series of digital transistors is designed to replace a single device and its external resistor bias network. The Bias Resistor Transistor (BRT) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base - emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space.
주요 특징
- Simplifies Circuit Design
- Reduces Board Space
- Reduces Component Count
- S and NSV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable
- These Devices are Pb - Free, Halogen Free/BFR Free and are RoHS Compliant
C463100 EasyEDA 라이브러리
컴플라이언스 & 수출 코드
| 타입 | 세부사항 |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8541600000 |
| USHTS | 8541600080 |
| TARIC | 8541600000 |
| CAHTS | 8541600010 |
| BRHTS | 85416010 |
| INHTS | 85416000 |
| MXHTS | 8541.60.01 |
| 타입 | 세부사항 |
|---|---|
| RoHS | ROHS3 Compliant |
| ECCN | EAR99 |
| CNHTS | 8541600000 |
| USHTS | 8541600080 |
| TARIC | 8541600000 |
| 타입 | 세부사항 |
|---|---|
| CAHTS | 8541600010 |
| BRHTS | 85416010 |
| INHTS | 85416000 |
| MXHTS | 8541.60.01 |
대체 부품
| MPN | 제조사 | 포장 | 재고 현황 | 단가 | ||
|---|---|---|---|---|---|---|
| RN4987,LF(CT | TOSHIBA | TSSOP-6(SC-88)SOT-363 | 480 | $ 0.1019 | ||
| DCX124EUQ-13R-F | DIODES | SOT-363 | 30 | $ 0.1021 | ||
| NHUMD9F | Nexperia | TSSOP-6 | 952 | $ 0.5013 | ||
| NHUMD9X | Nexperia | TSSOP-6 | 60 | $ 0.3747 | ||
| DCX114EU-13R-F | DIODES | SOT-363 | 20 | $ 0.0527 | ||
| DCX143ZU-7-F | DIODES | SOT-363 | 40 | $ 0.141 | ||
| RN4904,LF | TOSHIBA | TSSOP-6(SC-88)SOT-363 | 0 | $ 0.073 | ||
| RN49A2,LF(CT | TOSHIBA | TSSOP-6(SC-88)SOT-363 | 0 | $ 0.0695 | ||
| PUMD12,135 | Nexperia | TSSOP-6 | 0 | $ 0.0866 | ||
| ACX124EUQ-7R | DIODES | SOT-363 | 0 | $ 0.1172 |

