MICROCHIP PIC16C926-I/L

The PIC16C925/926 series is a family of low cost, high performance, CMOS, fully static, 8-bit microcontrollers with an integrated LCD Driver module, in the PIC16CXXX mid-range family.

• Only 35 single word instructions to learn
• All single cycle instructions except for program branches which are two-cycle
• Operating speed: DC - 20 MHz clock input DC - 200 ns instruction cycle
• Up to 8K x 14-bit words of EPROM program memory, 336 bytes general purpose registers (SRAM), 60 special function registers
• Pinout compatible with PIC16C923/924
• 25 I/O pins with individual direction control and 25 - 27 input only pins
• Timer0 module: 8-bit timer/counter with programmable 8-bit prescaler
• Timer1 module: 16-bit timer/counter, can be incremented during SLEEP via external crystal/clock
• Timer2 module: 8-bit timer/counter with 8-bit period register, prescaler, and postscaler
• One Capture, Compare, PWM module
• Synchronous Serial Port (SSP) module with two modes of operation: 3-wire SPI (supports all 4 SPI modes), I2C Slave mode
• Programmable LCD timing module: Multiple LCD timing sources available, Can drive LCD panel while in SLEEP mode, Static, 1/2, 1/3, 1/4 multiplex, Static drive and 1/3 bias capability, 16 bytes of dedicated LCD RAM, Up to 32 segments, up to 4 commons
• 10-bit 5-channel Analog-to-Digital Converter (A/D)
• Brown-out Reset (BOR)
• Power-on Reset (POR)
• Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
• Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
• Programmable code protection
• Selectable oscillator options
• In-Circuit Serial Programming (ICSP) via two pins
• Processor read access to program memory
• Low power, high speed CMOS/EPROM technology
• Fully static design
• Wide operating voltage range: 2.5V to 5.5V
• Commercial and Industrial temperature ranges
• Low power consumption