Name: MAXIM MAX6964AEG+
Brand: MAXIM
SKU: C3192181
Price: 3.1755 USD
Availability: OutOfStock

The MAX6964 I2C-compatible serial interfaced peripheral provides microprocessors with 17 output ports. Each output is an open-drain current-sinking output rated at 50mA and 7V. The outputs are capable of driving LEDs, or providing logic outputs with external resistive pullup up to 7V.
Eight-bit PWM current control is also integrated. Four of the bits are global control and apply to all LED outputs to provide coarse adjustment of current from fully off to fully on with 14 intensity steps. Additionally, each output has an individual 4-bit control, which further divides the globally set current into 16 more steps. Alternatively, the current control can be configured as a single 8-bit control that sets all outputs at once.
Each output has independent blink timing with two blink phases. LEDs can be individually set to be either on or off during either blink phase, or to ignore the blink control. The blink period is controlled by an external clock (up to 1kHz) on BLINK or by a register. The BLINK input can also be used as a logic control to turn the LEDs on and off, or as a general-purpose input (GPI).
The MAX6964 supports hot insertion. The SDA, SCL, RST, BLINK, and the slave address input ADO remain high impedance in power-down (ΔV+=0V) with up to 6V asserted upon them. The output ports remain high impedance with up to 8V asserted upon them.
The MAX6964 is controlled through a 2-wire I2C serial interface, and can be configured to one of four I2C addresses.
400kbps, 2-Wire Serial Interface, 5.5V Tolerant
2V to 3.6V Operation
Overall 8-Bit PWM LED Intensity Control Global 16-Step Intensity Control Plus Individual 16-Step Intensity Controls
Two-Phase LED Blinking
High Port Output Current—Each Port 50mA (max)
RST Input Clears the Serial Interface and Restores Power-Up Default State
Supports Hot Insertion
Outputs are 7V-Rated Open Drain
Low Standby Current (1.2μA (typ), 3.3μA (max))
Small 4mm x 4mm, 0.8mm High Thin QFN Package
-40°C to +125°C Temperature Range

The MAX6964 I2C-compatible serial interfaced peripheral provides microprocessors with 17 output ports. Each output is an open-drain current-sinking output rated at 50mA and 7V. The outputs are capable of driving LEDs, or providing logic outputs with external resistive pullup up to 7V.
Eight-bit PWM current control is also integrated. Four of the bits are global control and apply to all LED outputs to provide coarse adjustment of current from fully off to fully on with 14 intensity steps. Additionally, each output has an individual 4-bit control, which further divides the globally set current into 16 more steps. Alternatively, the current control can be configured as a single 8-bit control that sets all outputs at once.
Each output has independent blink timing with two blink phases. LEDs can be individually set to be either on or off during either blink phase, or to ignore the blink control. The blink period is controlled by an external clock (up to 1kHz) on BLINK or by a register. The BLINK input can also be used as a logic control to turn the LEDs on and off, or as a general-purpose input (GPI).
The MAX6964 supports hot insertion. The SDA, SCL, RST, BLINK, and the slave address input ADO remain high impedance in power-down (ΔV+=0V) with up to 6V asserted upon them. The output ports remain high impedance with up to 8V asserted upon them.
The MAX6964 is controlled through a 2-wire I2C serial interface, and can be configured to one of four I2C addresses.
400kbps, 2-Wire Serial Interface, 5.5V Tolerant
2V to 3.6V Operation
Overall 8-Bit PWM LED Intensity Control Global 16-Step Intensity Control Plus Individual 16-Step Intensity Controls
Two-Phase LED Blinking
High Port Output Current—Each Port 50mA (max)
RST Input Clears the Serial Interface and Restores Power-Up Default State
Supports Hot Insertion
Outputs are 7V-Rated Open Drain
Low Standby Current (1.2μA (typ), 3.3μA (max))
Small 4mm x 4mm, 0.8mm High Thin QFN Package
-40°C to +125°C Temperature Range

Hersteller	MAXIM
Herst.-Teilenr.	MAX6964AEG+
LCSC-Nr.	C3192181
Verp.	SSOP-24-150mil
Kundennummer
Hauptmerkm.	50mA 400kHz 17 7V 2V~3.6V SSOP-24-150mil LED Drivers RoHS
Datenblatt	MAXIM MAX6964AEG+
RoHS-Konformität	1 Dokumente verfügbar
Alternativteile	1

Typ	Beschreibung
Kategorie	Integrated Circuits (ICs)/Power Management (PMIC)/LED Drivers
Hersteller	MAXIM
Verp.	SSOP-24-150mil
Output Current	50mA
Operating Temperature	-40℃~+125℃
Frequency - Switching	400kHz
Dimming	PWM;Analog
Voltage - Input(AC)	-
Number of Channels	17
Type	-
Features	-
Switch tube (built-in/external)	-
Output Voltage	7V
Topology	-
Constant Current Accuracy	-
Voltage - Input(DC)	2V~3.6V

Typ	Beschreibung
Kategorie	Integrated Circuits (ICs)/Power Management (PMIC)/LED Drivers
Hersteller	MAXIM
Verp.	SSOP-24-150mil
Output Current	50mA
Operating Temperature	-40℃~+125℃
Frequency - Switching	400kHz
Dimming	PWM;Analog
Voltage - Input(AC)	-

Typ	Beschreibung
Number of Channels	17
Type	-
Features	-
Switch tube (built-in/external)	-
Output Voltage	7V
Topology	-
Constant Current Accuracy	-
Voltage - Input(DC)	2V~3.6V

Stk.	E-Preis(Nur als Referenz)	Gesamtbetrag
1+	$ 8.6608	$ 8.66
200+	$ 3.3514	$ 670.28
500+	$ 3.2341	$ 1617.05
1,000+	$ 3.1755	$ 3175.50
Standardgehäuse50/Full Tube

MAXIM MAX6964AEG+

Produktspezifikationen

Merkmale

Produktspezifikationen

Merkmale

C3192181 EasyEDA-Bibliothek

Compliance & Exportcodes

Alternativteile

Typ	Details
RoHS	ROHS3 Compliant
ECCN	EAR99
CNHTS	8542399000
USHTS	8542390001
TARIC	8542399000
CAHTS	8542390000
BRHTS	85423999
INHTS	85423900
MXHTS	8542.39.99