LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
VISHAY SIC467ED-T1-GE3 product image
  • SIC467ED-T1-GE3 thumbnail 1
  • SIC467ED-T1-GE3 thumbnail 2
  • SIC467ED-T1-GE3 thumbnail 3
  • Pinbelegung
  • Footprint
Abbildung ähnlich

VISHAY SIC467ED-T1-GE3

Hersteller
Herst.-Teilenr.
SIC467ED-T1-GE3
LCSC-Nr.
C2071963
Verp.
MLP55-27L(5x5)
Kundennummer
Hauptmerkm.
4.5 V to 60 V Input, microBUCK DC/DC Converter
DatenblattVISHAY SIC467ED-T1-GE3
RoHS-Konformität2 Dokumente verfügbar
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 4.1998$ 4.20
10+$ 4.1068$ 41.07
30+$ 3.848$ 115.44
100+$ 3.7844$ 378.44
Standardgehäuse3000/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - DC DC Switching Regulators
HerstellerVISHAY
Verp.MLP55-27L(5x5)
Operating Temperature-40℃~+105℃@(TA)
Frequency - Switching2MHz
FunctionStep-down type
Number of Outputs1
FeaturesAdjustable current limiting;Cycle-by-cycle current limiting;Hiccup current limiting;Adjustable soft-start;Light load efficient mode;Output voltage tracking;Operating status indication;Overcurrent Protection
Output TypeAdjustable
TopologyBuck
Operating Voltage4.5V~60V
Switch tube (built-in/external)Built-in
Output Voltage800mV~24V
Output Current6A
Quiescent Current156uA

Beschreibung

KI-Übersetzung

The SiC46x is a family of wide input voltage high efficiency synchronous buck regulators with integrated high side and low side power MOSFETs. Its power stage is capable of supplying high continuous current at up to 2 MHz switching frequency. This regulator produces an adjustable output voltage down to 0.8 V from 4.5 V to 60 V input rail to accommodate a variety of applications, including computing, consumer electronics, telecom, and industrial. SiC46x’s architecture delivers ultrafast transient response with minimum output capacitance and tight ripple regulation at very light load. The device is internally compensated and is stable with any capacitor. No external ESR network is required for loop stability purpose. The device also incorporates a power saving scheme that significantly increases light load efficiency. The regulator integrates a full protection feature set, including over current protection (OCP), output overvoltage protection (OVP), short circuit protection (SCP), output undervoltage protection (UVP) and thermal shutdown (OTP). It also has UVLO for input rail and a user programmable soft start. The SiC46x family is available in 2 A, 4 A, 6 A, 10 A pin compatible 5 mm by 5 mm lead (Pb)-free power enhanced MLP55-27L package.

Merkmale

KI-Übersetzung
  • Single-supply operation, input voltage range 4.5 V to 60 V
  • Adjustable output voltage down to 0.8 V
  • Scalable solutions: 2 A (SiC469), 4 A (SiC468), 6 A (SiC467), 10 A (SiC466)
  • Output voltage tracking and pre-bias startup sequencing
  • Output voltage accuracy ±1% over -40°C to +125°C
  • Internal compensation
  • High efficiency: peak efficiency up to 98%
  • Shutdown supply current 4 μA
  • Non-switching operating current 156 μA
  • Highly configurable: switching frequency adjustable from 100 kHz to 2 MHz
  • Adjustable soft-start and selectable preset 100%, 75%, and 50% current limit
  • Two operating modes: forced continuous conduction, power saving
  • Robust protection: output overvoltage protection
  • Output undervoltage/short-circuit protection with auto-retry
  • Power good flag and overtemperature protection
  • Supported by Vishay PowerCAD online design simulation

Anwendungen

KI-Übersetzung
  • Industrial and automation
  • Home automation
  • Industrial and server computing
  • Networking, telecom, and base station power supplies
  • Wall transformer regulation
  • Robotics
  • High-end hobbyist electronics: RC cars, aircraft, and drones
  • Battery management systems
  • Power tools
  • Vending machines, ATMs, and slot machines