LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
onsemi FDMF6707C product image
Abbildung ähnlich

onsemi FDMF6707C

Hersteller
Herst.-Teilenr.
FDMF6707C
LCSC-Nr.
C891018
Verp.
PQFN-40(6x6)
Kundennummer
Hauptmerkm.
4.5V~5.5V PQFN-40(6x6) Gate Drivers RoHS
Datenblattonsemi FDMF6707C
RoHS-Konformität3 Dokumente verfügbar
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 2.272$ 2.27
200+$ 0.8798$ 175.96
500+$ 0.849$ 424.50
1,000+$ 0.8335$ 833.50
Standardgehäuse3000/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Gate Drivers
Herstelleronsemi
Verp.PQFN-40(6x6)
Input Logic Level - Low840mV~1.42V
Low Level Delay Time-
High Level Delay Time-
Quiescent Current2mA
Input Logic Level - High3.04V~4.05V
Voltage - Supply4.5V~5.5V
Operating Temperature-40℃~+150℃
Driven ConfigurationHalf-Bridge
Current - Output Low(IOL)-
Rise Time6ns;20ns
Fall Time5ns;13ns
FeaturesEnable shutdown;Dead-time control;Interleaved conduction protection;Built-in bootstrap diode
Current - Output High(IOH)-
Load TypeMOSFET

Beschreibung

KI-Übersetzung

The XS™ DrMOS series is Fairchild's next-generation, fully optimized integrated MOSFET plus driver power stage solution for high-current, high-frequency, synchronous buck DC-DC applications. The FDMF6707C integrates a driver IC, two power MOSFETs, and a bootstrap Schottky diode into a thermally enhanced, ultra-compact 6x6 mm PQFN package.

Through the integrated approach, the entire switching power stage is optimized for driver and MOSFET dynamic performance, system inductance, and power MOSFET RDS(ON). The XS™ DrMOS employs Fairchild's high-performance PowerTrench® MOSFET technology, which significantly reduces switching ringing and eliminates snubber circuits in most buck converter applications.

A new driver IC featuring shorter dead time and propagation delay further enhances performance. The thermal warning function indicates potential overtemperature conditions. The FDMF6707C also features skip cycle mode (SMOD) for improved light-load efficiency, and a tri-state 5 V PWM input for compatibility with a wide variety of PWM controllers.

Merkmale

KI-Übersetzung
  • Peak efficiency exceeding 93%
  • Handles up to 50 A high current
  • High-performance PQFN copper clip package
  • Three-state 5.0 V PWM input driver
  • Skip-cycle mode SMOD# (low-side gate shutdown) input
  • Thermal warning flag for overtemperature condition
  • Driver output disable function (DISB# pin)
  • SMOD# and DISB# inputs with internal pull-up and pull-down respectively
  • Fairchild PowerTrench® technology MOSFETs for clean voltage waveforms and reduced ringing
  • Low-side MOSFET with Fairchild SyncFET™ (integrated Schottky diode) technology
  • Integrated bootstrap Schottky diode
  • Adaptive gate drive timing for shoot-through prevention
  • Undervoltage lockout (UVLO)
  • Optimized for switching frequencies up to 1 MHz
  • Low-profile SMD package
  • Fairchild Green package, RoHS compliant
  • Based on Intel® 4.0 DrMOS standard

Anwendungen

KI-Übersetzung
  • High-performance gaming motherboards
  • Compact blade servers
  • Desktop computers
  • Workstations
  • High-current DC-DC point-of-load (POL) converters