LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
onsemi AX-SIP-SFEU-1-01-TX30 product image
Immagini a scopo illustrativo

onsemi AX-SIP-SFEU-1-01-TX30

Produttore
onsemi
Cod. Prod.
AX-SIP-SFEU-1-01-TX30
Cod. LCSC
C890231
Imballo
SMD-38P
Numero Cliente
Attr. chiave
SMD-38P RF Transceiver Modules and Modems RoHS
Scheda Tecnicaonsemi AX-SIP-SFEU-1-01-TX30
Conformità RoHS3 documenti disponibili
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 7.2615$ 7.26
200+$ 2.8111$ 562.22
500+$ 2.7112$ 1355.60
1,000+$ 2.6636$ 2663.60
Package Standard3000/Full Reel
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaRF and Wireless/RF Transceiver Modules and Modems
Produttoreonsemi
ImballoSMD-38P
Model-
Output Power(Max)13dBm
Frequency Range868.13MHz;869.525MHz
Voltage - Supply-
Antenna Type-
Sensitivity-
Communication Distance-
Modulation System-
Receive Current-
Features-
InterfaceSPI;UART
Operating Temperature-
Current Of Transmitting-
Aiuto & FeedbackMostra prodotti simili (0) >

Descrizione

Traduzione AI

AX-SIP-SFEU and AX-SIP-SFEU-API are ultra-low-power, ultra-compact SiP solutions for Sigfox network nodes, supporting both uplink and downlink functionality. The SiP measures only 7 mm × 9 mm and features conformal shielding, integrating all necessary components and firmware required for transmit and receive operations on the European Sigfox network. No additional passive components or reference frequency sources are required on the customer's PCB, and a single-ended 50-ohm antenna port is provided. The AX-SIP-SFEU interfaces with customer products via logic-level RS232 UART, using AT commands to transmit frames and configure radio parameters. The AX-SIP-SFEU-API variant is intended for customers who wish to develop their own application software based on the AX-SIP-SF-LIB-1-GEVK library.

Caratteristiche

Traduzione AI
  • Single-package, zero external components; full Sigfox uplink and downlink functionality controlled via AT commands or API.
  • Part of a complete development and product ecosystem for any Sigfox application.
  • Sigfox certified.
  • SIP38 9 mm × 7 mm package.
  • Conformal shielding.
  • Supply voltage range: 2.1 V - 3.6 V.
  • Operating temperature range: -30°C to 85°C.
  • Integrated temperature sensor.
  • Supply voltage measurement capability.
  • 15 GPIO pins.
  • 6 GPIO pins with optional voltage measurement: differential (1 V or 10 V range) or single-ended (1 V range), 10-bit resolution.
  • 2 GPIO pins with optional Σ-Δ DAC output.
  • 2 GPIO pins with optional clock output.
  • 3 GPIO pins configurable as SPI master interface.
  • Integrated RX/TX switching with single-ended 50 Ω antenna pin.
  • Ultra-low power consumption: 0.24 C charge per Sigfox OOB packet transmission at nominal TX power.
  • Deep sleep mode current: 180 nA.
  • Sleep mode current: 1.2 μA.
  • Standby mode current: 0.55 mA.
  • Continuous radio RX mode (869.525 MHz): 14 mA.
  • Continuous radio TX mode (868.130 MHz): 45 mA @ nominal TX power (13 dBm).
  • Receiver: carrier frequency 869.525 MHz, data rate 600 bps FSK, sensitivity -125 dBm @ 600 bps, 869.525 MHz, GFSK, maximum input power 0 dBm.
  • Transmitter: carrier frequency 868.13 MHz, data rate 100 bps PSK, integrated high-efficiency high-linearity PA, maximum output power 13 dBm, power level programmable in 1 dBm steps.

Applicazioni

Traduzione AI
  • Sigfox network uplink/downlink