LCSC Electronics logoLCSC Electronics svg logo
Accedi
USD
Carrello
ADI LTM4631IV#PBF product image
Immagini a scopo illustrativo

ADI LTM4631IV#PBF

Produttore
ADI
Cod. Prod.
LTM4631IV#PBF
Cod. LCSC
C690526
Imballo
LGA-144(16x16)
Numero Cliente
Attr. chiave
Step-down type Adjustable 600mV~1.8V 4.5V~15V LGA-144(16x16) DC DC Converters RoHS
Scheda TecnicaADI LTM4631IV#PBF
Conformità RoHS1 documenti disponibili
Esaurito
Avvisami
Minimo: 1Multiplo: 1Unità di vendita: Piece
Aggiungi alla Lista BOM
QtàPr. unit.(Solo per riferimento)Importo totale
1+$ 50.0706$ 50.07
200+$ 19.3769$ 3875.38
500+$ 18.6965$ 9348.25
1,000+$ 18.3602$ 18360.20
Package Standard90/Full Tray
Prezzo migliore per quantità maggiore?
$

Specifiche del Prodotto

Tutto
TipoDescrizione
CategoriaPower Supplies/Power Suppliers - Board Mount/DC DC Converters
ProduttoreADI
ImballoLGA-144(16x16)
Synchronous Rectifier-
Number of Outputs2
FunctionStep-down type
Output TypeAdjustable
TopologyBuck
Iout10A
Output Voltage600mV~1.8V
Frequency - Switching500kHz~750kHz
Operating Temperature-40℃~+125℃
FeaturesCycle-by-cycle current limiting;Frequency synchronization;Output voltage tracking;Adjustable soft-start;Overcurrent Protection;Light load efficient mode;Output voltage differential sensing;Operating status indication;Built-in LDO regulator
Voltage - Supply4.5V~15V
Quiescent Current425uA
Aiuto & FeedbackMostra prodotti simili (0) >

Descrizione

Traduzione AI

The LTM4631 is a dual 10A or single 20A output switching mode step-down DC/DC µModule (power module) regulator. Included in the package are the switching controller, power FETs, inductors and all supporting components. Operating from an input voltage range of 4.5V to 15V, the LTM4631 supports two outputs each with an output voltage range of 0.6V to 1.8V, each set by a single external resistor. Its high efficiency design delivers up to 10A continuous current for each output. Only a few input and output capacitors are needed. The device supports frequency synchronization, multiphase operation, Burst Mode operation and output voltage tracking for supply rail sequencing and has an onboard temperature diode for device temperature monitoring. High switching frequency and a current mode architecture enable a very fast transient response to line and load changes without sacrificing stability. Fault protection features include overvoltage and overcurrent protection. The LTM4631 is offered in an ultrathin 16mm × 16mm × 1.91mm LGA and 16mm × 16mm × 2.51mm BGA packages. The LTM4631 is available with SnPb (BGA) or ROHS compliant terminal finish.

Caratteristiche

Traduzione AI
  • Dual 10A or Single 20A Output
  • Input Voltage Range: 4.5V to 15V
  • Output Voltage Range: 0.6V to 1.8V
  • ±1.5% Maximum Total DC Output Error Over Line, Load and Temperature
  • Differential Remote Sense Amplifier
  • Current Mode Control/Fast Transient Response
  • Adjustable Switching Frequency
  • Overcurrent Foldback Protection
  • Multiphase Parallel Current Sharing with Multiple LTM4631s
  • Frequency Synchronization
  • Internal Temperature Monitor
  • Selectable Burst Mode Operation
  • Soft-Start/Voltage Tracking
  • Output Overvoltage Protection
  • Ultrathin 16mm × 16mm × 1.91mm LGA and 16mm × 16mm × 2.51mm BGA Packages

Applicazioni

Traduzione AI
  • Telecom and Networking Equipment
  • Storage and ATCA Cards
  • Industrial Equipment