LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
ADI LTC6404IUD-4#PBF product image
Abbildung ähnlich

ADI LTC6404IUD-4#PBF

Hersteller
ADI
Herst.-Teilenr.
LTC6404IUD-4#PBF
LCSC-Nr.
C689281
Verp.
QFN-16-EP(3x3)
Kundennummer
Hauptmerkm.
85mA 500uV 1200V/us 60dB 23uA Rail-to-rail output QFN-16-EP(3x3) Instrumentation, Op Amps, Buffer Amps RoHS
DatenblattADI LTC6404IUD-4#PBF
RoHS-Konformität1 Dokumente verfügbar
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 6.9626$ 6.96
200+$ 2.6949$ 538.98
500+$ 2.6008$ 1300.40
1,000+$ 2.5529$ 2552.90
Standardgehäuse121/Full Tube
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps
HerstellerADI
Verp.QFN-16-EP(3x3)
Settling time8ns
output typeDifferential
Output Current85mA
Vos - Input Offset Voltage500uV
Slew Rate1200V/us
Input Offset Current(Ios)10uA
Operating Temperature-40℃~+85℃
Common Mode Rejection Ratio(CMRR)60dB
Ib - Input Bias Current23uA
Power Supply Rejection Ratio (PSRR)94dB
Input Offset Voltage Drift(Vos TC)1uV/℃
FeaturesSingle-ended to differential conversion;Adjustable output common-mode voltage;Enable/shutdown function;Built-in signal filtering
Rail to RailRail-to-rail output
Single Supply2.7V~5.25V
Noise density(eN)1.5nV/√Hz@1MHz
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Beschreibung

KI-Übersetzung

The LTC6404 is a family of AC precision, very low noise, low distortion, fully differential input/output amplifiers optimized for 3V, single supply operation. The LTC6404-1 is unity-gain stable. The LTC6404-2 is designed for closed-loop gains greater than or equal to 2V/V. The LTC6404-4 is designed for closed-loop gains greater than or equal to 4V/V. The LTC6404 closed-loop bandwidth extends from DC to 600MHz. In addition to the normal unfiltered outputs (OUT+ and OUT–), the LTC6404 has a built-in 88.5MHz differential single-pole lowpass filter and an additional pair of filtered outputs (OUTF+, OUTF–). An input referred voltage noise of 1.5nV/√Hz make the LTC6404 able to drive state-of-the-art 16-/18-bit ADCs while operating on the same supply voltage, saving system cost and power. The LTC6404 is characterized, and maintains its performance for supplies as low as 2.7V and can operate on supplies up to 5.25V. It draws only 27.3mA, and has a hardware shutdown feature which reduces current consumption to 250μA. The LTC6404 family is available in a compact 3 mm×3 mm 16-pin leadless QFN package and operates over a -40°C to 125°C temperature range.

Merkmale

KI-Übersetzung
  • Fully Differential Input and Output
  • Low Noise: 1.5nV/√Hz RTI
  • Very Low Distortion: LTC6404-1 (2VP-P , 10MHz): –91dBc; LTC6404-2 (2VP-P , 10MHz): –96dBc; LTC6404-4 (2VP-P , 10MHz): –101dBc
  • Closed-Loop –3dB Bandwidth: 600MHz
  • Slew Rate: 1200V/μs (LTC6404-4)
  • Adjustable Output Common Mode Voltage
  • Rail-to-Rail Output Swing
  • Input Range Extends to Ground
  • Large Output Current: 85mA (Typ)
  • DC Voltage Offset < 2mV (Max)
  • Low Power Shutdown
  • Tiny 3mm×3mm×0.75mm 16-Pin QFN Package

Anwendungen

KI-Übersetzung
  • Differential Input A/D Converter Driver
  • Single-Ended to Differential Conversion/Amplification
  • Common Mode Level Translation
  • Low Voltage, Low Noise, Signal Processing