LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
ADI AD8040ARZ-REEL7 product image
  • AD8040ARZ-REEL7 thumbnail 1
  • AD8040ARZ-REEL7 thumbnail 2
  • AD8040ARZ-REEL7 thumbnail 3
  • Pinbelegung
  • Footprint
Abbildung ähnlich

ADI AD8040ARZ-REEL7

Hersteller
Herst.-Teilenr.
AD8040ARZ-REEL7
LCSC-Nr.
C652232
Verp.
SOIC-14
Kundennummer
Hauptmerkm.
Low-power, high-speed rail-to-rail input/output amplifier
DatenblattADI AD8040ARZ-REEL7
RoHS-Konformität1 Dokumente verfügbar
Alternativteile10
Vorrätig: 3
3 Ab Lager, sofort versandfertig
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-PreisGesamtbetrag
1+$ 4.323$ 4.32
10+$ 4.2254$ 42.25
30+$ 4.1588$ 124.76
100+$ 4.0937$ 409.37
Standardgehäuse1000/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Linear/Amplifiers/Instrumentation, Op Amps, Buffer Amps
HerstellerADI
Verp.SOIC-14
Output Current160mA
Number of Channels4
Vos - Input Offset Voltage5mV
Slew Rate60V/us
Input Offset Current(Ios)900nA
Operating Temperature-40℃~+125℃
Common Mode Rejection Ratio(CMRR)90dB
Ib - Input Bias Current1.3uA
Input Offset Voltage Drift(Vos TC)30uV/℃
Gain Bandwidth Product125MHz
Quiescent Current1.5mA
Features-
Input Voltage Noise Density16.5nV/√Hz@100kHz
Dual Supply-
Rail to RailRail-to-Rail Input, Rail-to-Rail Output
Single Supply2.7V~12V

Beschreibung

KI-Übersetzung

The AD8029 (single), AD8030 (dual), and AD8040 (quad) are rail-to-rail input and output high-speed amplifiers with a quiescent current of only 1.3mA per amplifier. Despite their low power consumption, these amplifiers deliver excellent performance with a small-signal bandwidth of 125MHz and a slew rate of 60V/μs. ADI's proprietary XFCB process enables the combination of high speed, high performance, and low power consumption in these devices.

This amplifier family operates from a single supply with rail-to-rail input and output performance over a supply voltage range of 2.7V to 12V. The input voltage range can exceed either supply rail by 200mV without phase reversal. The output dynamic range extends to within 40mV of either supply rail.

The AD8029/AD8030/AD8040 deliver excellent signal quality at ultralow power consumption. At G = +1, spurious-free dynamic range (SFDR) is 72dBc (1MHz), and 0.1% settling time is only 80ns. The low distortion and fast settling characteristics make these amplifiers well suited as drivers for single-supply ADCs.

The versatile feature set allows these amplifiers to be used across a wide voltage range while consuming less than 6.5mW. Whether in battery-powered systems demanding high bandwidth or high-speed systems with high component density and low power requirements, these characteristics help extend system operating time.

The AD8029/AD8030 are the only low-power, rail-to-rail input and output high-speed amplifiers available in the compact SOT23 and SC70 packages, rated over the extended industrial temperature range of −40°C to +125°C.

Merkmale

KI-Übersetzung
  • Low power, supply current per amplifier: 1.3mA
  • High speed, 3dB bandwidth: 125MHz (G = +1)
  • Slew rate: 60V/μs
  • 0.1% settling time: 80ns
  • Rail-to-rail input and output, input exceeds supply rail by 200mV without phase inversion
  • Wide supply voltage range: 2.7V to 12V
  • Offset voltage: 6mV (maximum)
  • Low input bias current +0.7μA to -1.5μA
  • Small packages: SOIC-8, SC70-6, SOT23-8, SOIC-14, TSSOP-14

Anwendungen

KI-Übersetzung
  • Battery-powered instrumentation
  • Filters
  • ADC drivers
  • Buffers

Alternativteile

MPNHerstellerVerpackungVerfügbarkeitStückpreis
AD8054ARZADISOIC-1422$ 9.4084
LMH6644MAX/NOPBTISOIC-14100$ 4.6969
TLV3544IDRTISOIC-1476$ 3.2483
AD8054ARZ-REEL7ADISOIC-14137$ 5.588
AD8040ARZ-REELADISOIC-140$ 3.1456
AD8040ARZADISOIC-140$ 5.9446
LT1817IS#PBFADISOP-140$ 4.544
LT1817CS#PBFADISOP-140$ 3.7229
AD8044ARZ-14ADISOIC-140$ 11.4532
AD8044ARZ-14-REEL7ADISOIC-140$ 11.3263