LCSC Electronics logoLCSC Electronics svg logo
Anmelden
USD
Warenkorb
Nisshinbo Micro Devices Inc. RP173K321B-TR product image
Abbildung ähnlich

Nisshinbo Micro Devices Inc. RP173K321B-TR

Hersteller
Nisshinbo Micro Devices Inc.
Herst.-Teilenr.
RP173K321B-TR
LCSC-Nr.
C6416435
Verp.
DFN1010-4
Kundennummer
Hauptmerkm.
3.2V Positive Fixed DFN1010-4 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators RoHS
DatenblattNisshinbo Micro Devices Inc. RP173K321B-TR
Nicht vorrätig
Benachrichtigen
Minimum: 1Vielfaches: 1Verkaufseinheit: Piece
Zur BOM-Liste hinzufügen
Stk.E-Preis(Nur als Referenz)Gesamtbetrag
1+$ 0.4011$ 0.40
200+$ 0.1601$ 32.02
500+$ 0.1547$ 77.35
1,000+$ 0.1521$ 152.10
Standardgehäuse10000/Full Reel
Besserer Preis bei größerer Menge?
$

Produktspezifikationen

Alle
TypBeschreibung
KategorieIntegrated Circuits (ICs)/Power Management (PMIC)/Voltage Regulators - Linear, Low Drop Out (LDO) Regulators
HerstellerNisshinbo Micro Devices Inc.
Verp.DFN1010-4
Output Voltage3.2V
Number of Outputs1
Operating Temperature-40℃~+85℃
Supply Current (Iq)2uA
Output ConfigurationPositive
Operating Voltage11V
Output Current150mA
FeaturesEnable control;Reverse-polarity current protection;Short Circuit Protection;Over Current Protection;Thermal shutdown
Output TypeFixed
Hilfe & FeedbackÄhnliche Produkte anzeigen (0) >

Beschreibung

KI-Übersetzung

The RP173x is a voltage regulator featuring 150 mA output and low supply current of Typ. 2.0 μA. It consists of a voltage reference unit, an error amplifier, a resistor-net for voltage setting, a current limit circuit, a chip enable circuit and a Reverse Current Protection Circuit. RP173x is suitable for the power source such as the equipment being in the standby-mode. The A version with CE input pin has reduced CE pull-up resistance to make its supply current ultra low. The RP173x has Max.11 V Input voltage and is applicable to the portable communication equipment that requires the 2-cell Li-ion battery. Also it is applicable to the non-portable communication equipments. As the RP173x includes Reverse Current Protection Circuit, there is little leakage current, if it is used as back-up circuit. Packages are available in SOT-23-5, SC-88A, and 1-mm square DFN(PL)1010-4 packages. High density mounting of the ICs on boards is possible.

Merkmale

KI-Übersetzung
  • Output Current: Typ. 150 mA
  • Supply Current: Typ. 2.0 μA
  • Standby Current: Typ. 0.2 μA
  • Dropout Voltage: Typ. 0.13 V (Iout = 30 mA, Vout = 3.0 V); Typ. 0.90 V (Iout = 150 mA, Vout = 3.0 V)
  • Output Voltage Accuracy: ±1.0% (1.5 V < VOUT ≤ 5.5 V, Ta = 25°C)
  • Line Regulation: Typ. 0.02%/V
  • Packages: DFN(PL)1010-4, SC-88A, SOT-23-5
  • Input Voltage Range: 2.5 V to Set VOUT + 6.5 V (Max. 11 V)
  • Output Voltage Range: 1.2 V to 5.5 V (0.1 V step)
  • Built-in Reverse Current Protection Circuit
  • Short Current Limit: Typ. 45 mA
  • Built-in Peak Current Limit Circuit
  • Output capacitors: 0.1 μF or more

Anwendungen

KI-Übersetzung
  • Power source for portable communication equipments.
  • Power source for battery-powered equipments.
  • Power source for electrical appliances such as cameras, VSRs and camcorders.
  • Power source for digital home appliances.